Home | Gallery | Forum | Services | Webmail | Archive | Links | Contact Us | About Us
OS2 World.Com Forum
OS2 World.Com Online Discussion Forum.
Index / OS/2 - General / Setup & Installation
author message
Trap D on fresh MCP2 R51 install
Post a new topic Reply to this Topic Printable Version of this Topic Forward this Topic to your Friend Topic Commands (for administrator or moderators only)
Mike Luther
Normal member
in user

View this member's profileSearch all posts from this memberSend an email to this member
posts: 2
since: 12 Aug, 2005
1. Trap D on fresh MCP2 R51 install
Reply to this topic with quote Modify your message
Fresh MCP2 install on a new R51 fails at the initial boot to OS/2 with a Trap D as follows:

Exception in module:
TRAP 000d ERRCD=0000 ERACC=**** ERLIM=********
EAX=0000530e EBX=f9800000 ECX=00000102 EDX=00000741
ESI=fa1f04c0 EDI=00000001 EBP=00004e52 FLG=00013202
CS:EIP=0c08:00000001 CSACC=109b CSLIM=0000fffe
SS:ESP=0030:00004e40 SSACC=1097 SSLIM=00003fff
DS=0bf8 DSACC=0093 DSLIM=0000043f CR0=8001001b
ES=0030 ESACC=1097 ESLIM=00003fff CR2=fabd4027
FS=0ca8 FSACC=0093 FSLIM=000019ee
GS=0d00 GSACC=0093 GSLIM=0000018a

The system detected an internal processing error at
location ##0168:fff1eb1c - 000e:cb1c.
60000, 9084

078606d6
Internal revision 14.089_W4

I can boot to the command line on this R51 at that point with <ALT F1>. From there, I can acutally get briefly to the Desktop and see the initial install Desktop by simply entering the command PMSHELL at C:\. Which then is quickly followed by the 'standard' OS/2 install screen and we're right back at the CD-ROM install at the Desktop screen.


I chose not to install any Network Adapter, nor Audio, nor Printer for the initial install. I can use TEDIT to edit CONFIG.SYS, and note that the IBMLANLK and CLEANUP are still it it at this point. The default SVGA video is still there, as would be expected. And since it actually can sbow, for a moment, the correct desktop and revert to the PM install screen, one would think this isn't a video problem.


Any suggestion on how to debug what driver is doing this via hand manipulation of the CONFIG.SYS file, and/or import into the system from a valid CD-ROM drive which it can see at command line, of a utility to debug and fix this?

Thanks!

Date: 15 Sep, 2005 on 23:10
os2power
Premium member
in user

View this member's profileSearch all posts from this memberSend an email to this member
posts: 53
since: 08 Mar, 2003
2. Re:Trap D on fresh MCP2 R51 install
Reply to this topic with quote Modify your message
Check APAR on IBM OS/2 support site
Date: 16 Sep, 2005 on 01:26
MrJInx
Normal member
in user

View this member's profileSearch all posts from this memberSend an email to this member
posts: 5
since: 11 Feb, 2005
3. Re:Trap D on fresh MCP2 R51 install
Reply to this topic with quote Modify your message
A TP R51 can have Intel or ATI radeon 9000 video chipset, If it is the Radeon there is a issue with gradd video support. Svga gradd is the video driver in use after a few passes of the MCP installer. This issue was found in eCom 1.1 and corrected in eCS 1.2 due to included gradd fixes that occured after MCP2 was released. I had a very similar experience with my Dell D600. The MCP2 disk would need to be updated with the latest gradd drivers and fixpacks or better yet, Get eCS 1.2 and save yourself the cost of passport, Lack of future support from IBM and the effort.. Scitech IBM edition would fix the problem if you could maintain the shell long enough to install it...
Date: 16 Sep, 2005 on 07:08
Tomas
Normal member
in user

View this member's profileSearch all posts from this memberSend an email to this member
posts: 14
since: 11 Jan, 2005
4. Re:Trap D on fresh MCP2 R51 install
Reply to this topic with quote Modify your message
I had a problem similar to what you describe.
I managed to install MCP2 successfully by choosing VGA (and nothing but VGA). After finishing the installation I installed Snap.
Hope this helps.
So long.
Thomas
Date: 16 Sep, 2005 on 11:06
lpino
Normal member
in user

View this member's profileSearch all posts from this memberSend an email to this member
posts: 16
since: 12 Jul, 2003
5. Re:Trap D on fresh MCP2 R51 install
Reply to this topic with quote Modify your message

Mike Luther (15 Sep, 2005 23:10):
Fresh MCP2 install on a new R51 fails at the initial boot to OS/2 with a Trap D as follows:

Exception in module:
TRAP 000d ERRCD=0000 ERACC=**** ERLIM=********
EAX=0000530e EBX=f9800000 ECX=00000102 EDX=00000741
ESI=fa1f04c0 EDI=00000001 EBP=00004e52 FLG=00013202
CS:EIP=0c08:00000001 CSACC=109b CSLIM=0000fffe
SS:ESP=0030:00004e40 SSACC=1097 SSLIM=00003fff
DS=0bf8 DSACC=0093 DSLIM=0000043f CR0=8001001b
ES=0030 ESACC=1097 ESLIM=00003fff CR2=fabd4027
FS=0ca8 FSACC=0093 FSLIM=000019ee
GS=0d00 GSACC=0093 GSLIM=0000018a

The system detected an internal processing error at
location ##0168:fff1eb1c - 000e:cb1c.
60000, 9084

078606d6
Internal revision 14.089_W4

I can boot to the command line on this R51 at that point with <ALT F1>. From there, I can acutally get briefly to the Desktop and see the initial install Desktop by simply entering the command PMSHELL at C:\. Which then is quickly followed by the 'standard' OS/2 install screen and we're right back at the CD-ROM install at the Desktop screen.


I chose not to install any Network Adapter, nor Audio, nor Printer for the initial install. I can use TEDIT to edit CONFIG.SYS, and note that the IBMLANLK and CLEANUP are still it it at this point. The default SVGA video is still there, as would be expected. And since it actually can sbow, for a moment, the correct desktop and revert to the PM install screen, one would think this isn't a video problem.


Any suggestion on how to debug what driver is doing this via hand manipulation of the CONFIG.SYS file, and/or import into the system from a valid CD-ROM drive which it can see at command line, of a utility to debug and fix this?

Thanks!


Comment the APM driver. I had a similar problem with a R52 and that solved the problem for me. Easy and quick..

Leonardo Pino

Date: 20 Sep, 2005 on 16:45
Trap D on fresh MCP2 R51 install
Post a new topic Reply to this Topic Printable Version of this Topic Forward this Topic to your Friend Topic Commands (for administrator or moderators only)
All times are CET+1. < Prev. | P. 1 | Next >
Go to:
 

Powered by UltraBoard 2000 Standard Edition,
Copyright © UltraScripts.com, Inc. 1999-2000.
Home | Gallery | Forums | Services | Webmail | Archive | Links | Contact Us | About Us
OS2 World.Com 2000-2004