Author Topic: os2krnlSVN4375_unoff.zip with Trap 0008  (Read 3144 times)

Eike

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 14
    • View Profile
os2krnlSVN4375_unoff.zip with Trap 0008
« on: June 26, 2015, 11:15:31 am »
Hi,
this is my first try of OS4-System. Installation is done as described.
The system stops after:

Internal revision 15.1_SMP.4375
Loading: oemhlp.bpd ....Ok
Loading: acpi4.bpd File not found or corrupted

 PIC mask = 0xFFFB IF = 1
TRAP 0008
...
location ##0168:fff9b56c - 000f:0008f56c
3443, 0 trap.asm

System is a T60 with 3GB RAM
Config.sys is unmodified.
What is acpi4.bpd?



OS4User

  • Full Member
  • ***
  • Thank You
  • -Given: 5
  • -Receive: 4
  • Posts: 127
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #1 on: June 26, 2015, 02:08:48 pm »
Hi,
this is my first try of OS4-System. Installation is done as described.
The system stops after:

Internal revision 15.1_SMP.4375
Loading: oemhlp.bpd ....Ok
Loading: acpi4.bpd File not found or corrupted

 PIC mask = 0xFFFB IF = 1
TRAP 0008
...
location ##0168:fff9b56c - 000f:0008f56c
3443, 0 trap.asm

System is a T60 with 3GB RAM
Config.sys is unmodified.
What is acpi4.bpd?

hi

I hope, that if you are using an acpi.psd than it has been patched and the /ST=0 is added   -  pls check and confirm

acpi4.bpd  is an experimental acpi driver for os/4 kernel  and not obligatory

regards

Eike

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 14
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #2 on: June 26, 2015, 02:50:34 pm »
ACPI.PSD was not patched.

Now ACPI3_22_03.PAT is done on ACPI.PSD.
Config.sys reads: PSD=ACPI.PSD /ST0 /VW
The problem is still there, same trap at startup.  :(
« Last Edit: June 26, 2015, 02:52:09 pm by Eike »

OS4User

  • Full Member
  • ***
  • Thank You
  • -Given: 5
  • -Receive: 4
  • Posts: 127
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #3 on: June 26, 2015, 03:43:14 pm »
ACPI.PSD was not patched.

Now ACPI3_22_03.PAT is done on ACPI.PSD.
Config.sys reads: PSD=ACPI.PSD /ST0 /VW
The problem is still there, same trap at startup.  :(

can you show me comport log ?

Eike

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 14
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #4 on: June 26, 2015, 03:53:35 pm »
This is a native installation. T60 has no comport but dockingstation has.
I never before tried this.
What do I need? Nullmodemcable? Terminalsoftware?

OS4User

  • Full Member
  • ***
  • Thank You
  • -Given: 5
  • -Receive: 4
  • Posts: 127
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #5 on: June 26, 2015, 04:20:02 pm »
This is a native installation. T60 has no comport but dockingstation has.
I never before tried this.
What do I need? Nullmodemcable? Terminalsoftware?

1.) docking station
2.) com to com cable (null modem cable)
3.) another computer with com port and terminal software

show you os2ldr.ini and config.sys

Silvan Scherrer

  • Full Member
  • ***
  • Thank You
  • -Given: 1
  • -Receive: 8
  • Posts: 136
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #6 on: June 26, 2015, 04:39:52 pm »
ACPI.PSD was not patched.

Now ACPI3_22_03.PAT is done on ACPI.PSD.
Config.sys reads: PSD=ACPI.PSD /ST0 /VW
The problem is still there, same trap at startup.  :(

shouldn't the switch be /ST=0???
as you added /ST0
kind regards
Silvan
CTO bww bitwise works GmbH

Eike

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 14
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #7 on: June 26, 2015, 05:25:19 pm »
Sorry my fault :-\

/ST=0 did the trick!
The trap is gone!

For the case that debugging should be necessary in the future, has ecs a required terminalsoftware on board?
I never used one so I do not know the name.  :(

THX!!!

Boris

  • Sr. Member
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 16
  • Posts: 310
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #8 on: June 26, 2015, 05:42:25 pm »
For the case that debugging should be necessary in the future, has ecs a required terminalsoftware on board?
I never used one so I do not know the name.  :(

Please refer to the online documentation.
LIABILITY DISCLAIMER: this is how I understand and what I know, I may be highly inaccurate, or even completely wrong! There are no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of my posts. Think on your own!

OS4User

  • Full Member
  • ***
  • Thank You
  • -Given: 5
  • -Receive: 4
  • Posts: 127
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #9 on: June 26, 2015, 06:08:26 pm »
shouldn't the switch be /ST=0???
as you added /ST0

Thanks a lot !!! :)  I really missed that.

/ST=0 did the trick!
The trap is gone!

For the case that debugging should be necessary in the future, has ecs a required terminalsoftware on board?

congratulation,

for debugging you can use  ZOC  as "terminalsoftware"
same time you terminal can work under windows or linux

do not hesitate to update http://www.os2world.com/wiki/index.php?title=Phoenix_OS/4&action=edit&section=3 if you realized that you have learned something new 
« Last Edit: June 26, 2015, 06:15:07 pm by OS4User »

Wim Brul

  • Full Member
  • ***
  • Thank You
  • -Given: 3
  • -Receive: 28
  • Posts: 134
    • View Profile
    • Wim's home page
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #10 on: June 26, 2015, 07:09:38 pm »
Quote
Terminalsoftware?

I use a rexx script for logging from com port.

Andi B.

  • Sr. Member
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 12
  • Posts: 331
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #11 on: June 26, 2015, 08:04:31 pm »
There is also pmdf.exe and halite you can use.

Eike

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 14
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #12 on: June 26, 2015, 08:29:15 pm »
Thanks a lot!

I will give it a try and hopefully close my knowledge gap.  :D

MfG / Best regards
Wilfried

Eike

  • Newbie
  • *
  • Thank You
  • -Given: 2
  • -Receive: 2
  • Posts: 14
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #13 on: June 28, 2015, 12:29:09 pm »
Hi,

catching Kernellog works fine here.  :D

Wim's COM1GET.CMD works out of the box!
DTerm works fine also after adjusting the baudrate with ctrl+b to 115200.

If of interest, here is the log.

OS4User

  • Full Member
  • ***
  • Thank You
  • -Given: 5
  • -Receive: 4
  • Posts: 127
    • View Profile
Re: os2krnlSVN4375_unoff.zip with Trap 0008
« Reply #14 on: June 28, 2015, 12:57:31 pm »
Hi,

catching Kernellog works fine here.  :D

Wim's COM1GET.CMD works out of the box!
DTerm works fine also after adjusting the baudrate with ctrl+b to 115200.

If of interest, here is the log.

it looks ok