Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - roberto

Pages: 1 ... 16 17 [18] 19 20 ... 54
256
Web applications / Re: FF 45.x and resulting broken sites
« on: September 22, 2020, 10:31:56 pm »
I forgot, if someone wants to try:
REM SET KAI_AUTOMODE=DART
SET KAI_AUTOMODE=UNIAUD
I would say it works 99% ok
Saludos

257
Web applications / Re: FF 45.x and resulting broken sites
« on: September 22, 2020, 10:24:35 pm »
It gives me the feeling that the problem is THREADS = 3072
Max. 4095

The Thesseus4.01, show me
008A   13B0   FE3BFD20         1     001D   THESEUS4
34 processes with 187 threads were found.

With 1024 in the config.sys it is clearly insufficient.
The BS-info shows me about 240 threads, counting the lines.
But everything works better with 3072
It will not be that somewhere those threads are multiplied or tripled.
Saludos

258
Web applications / Re: FF 45.x and resulting broken sites
« on: September 19, 2020, 06:23:57 pm »
You can try this:
SWAPPATH=C:\OS2\SYSTEM 311289 311289
It is very experimental, and it can cause problems.
But for me it is one of the best values. Although the uniaud sound fails a bit and I have to move the mouse to recover the sound.
With other values ​​the uniaud works fine, but other things don't.
saludos

259
Web applications / Re: FF 45.x and resulting broken sites
« on: September 19, 2020, 04:14:20 pm »
I have seen problems similar to what you mention, with the Seamonkey, processors on top, the system dying. What version do you use of Arcaos, and the config.sys and the swappath, what do you have?

With arca505 I have had 40 or 50 websites open, now with arca506 I can only open 8 or 10 websites
Saludos

260
Applications / Re: gImageReader - qt5 OCR application
« on: September 19, 2020, 09:19:55 am »
[D:\gimagereader-3.3.1-os2-20200919]GIMAGEREADER-QT5
SYS1804: The system cannot find the file QTSPELL0.

Saludos

261
Applications / Re: gImageReader - qt5 OCR application
« on: September 18, 2020, 06:40:43 pm »
 Hello
 I have tried very little. But it seems to me to work fine.
Since I didn't have a scanner handy, I created the text in open office,
 and copied it with pmview to png. And I attach the result. I only failed the character O º
 I'm also not sure if I have selected the correct language version. :)
Saludos

262
I wanted something similar to the startup, but at the end.
Saludos

263
Games / Re: OpenTTD 1.10.3 for OS/2
« on: September 06, 2020, 12:34:52 am »
Paul, Thanks, but it's just a game, and I don't even know if I'd like it, don't put in any more effort, unless you
 feel like it, of course. It was mostly out of curiosity and to support your work.

Saludos

264
Setup & Installation / Re: ArcaOS 5.0.6 released
« on: September 05, 2020, 04:42:34 pm »
Hi Rolf
I have tried your new version of BS_info, and it fails me quite a bit,
 only the third or fourth attempt works well for me, and if I am executing the seamonkey is better.
 When it works it shows me information in all the sections, less in the VIDEO.
 I wanted to ask you, how do you calculate the percentage of virtual available memory, line 3 photo?

I see that a very similar result can be reached with very different settings.
I understand that 2907 = 160 + 268 + 2240 + 242 - 3 small differences?
In my case I cannot exceed 3054mb in the config.sys that tells me as accessible physical memory,
 the mem / v.
I understand that the system will be more stable the more it will be done at 100%? , it is right?
Saludos

265
Games / Re: OpenTTD 1.10.3 for OS/2
« on: September 05, 2020, 03:06:50 pm »
If I try to run the older version it shows me this:

[D:\openttd-1.4.0-os2-20140504\openttd]openttd
Fontconfig error: Cannot load default config file

Killed by SIGSEGV
pid=0x006b ppid=0x005e tid=0x0001 slot=0x00b9 pri=0x0200 mc=0x0001 ps=0x0010
D:\OPENTTD-1.4.0-OS2-20140504\OPENTTD\OPENTTD.EXE
OPENTTD 0:002fdfab
cs:eip=005b:0030dfab      ss:esp=0053:00add1e0      ebp=00000000
 ds=0053      es=0053      fs=150b      gs=0000     efl=00010202
eax=00000000 ebx=000002d3 ecx=00000000 edx=00000000 edi=0000387c esi=00000002
Process dumping was disabled, use DUMPPROC / PROCDUMP to enable it.

[D:\openttd-1.4.0-os2-20140504\openttd]

266
Games / Re: OpenTTD 1.10.3 for OS/2
« on: September 05, 2020, 02:57:06 pm »
With the pmdll all the dlls are displayed fine.
With the chkdll32, it shows this error:

[D:\openttd-1.10.3-os2-20200903]chkdll32 -l openttd.exe
  File is not a valid OS/2 .EXE or .DLL file                               ******this is the error show******

Loading DLL 'libcx0' --> C:\USR\LIB\LIBCX0.DLL.                   ****** The rest is a long list of dlls, which is all ok. I cut it *******


  Loading DLL 'DOSCALLS' --> loaded.
  Loading DLL 'MDM' --> C:\MMOS2\DLL\MDM.DLL.
    Loading DLL 'MMPM' --> C:\MMOS2\DLL\MMPM.DLL.
      Loading DLL 'DOSCALLS' --> loaded.

Saludos


267
Games / Re: OpenTTD 1.10.3 for OS/2
« on: September 05, 2020, 12:02:13 pm »
Thanks for the zip, but I can't start, I'm about to leave it as impossible.
popuplog.os2 show
------------------------------------------------------------

09-05-2020  11:28:11  SYS2070  PID 00be  TID 0001  Slot 0082
D:\OPENTTD-1.10.3-OS2-20200903\OPENTTD.EXE
SDL12
193
------------------------------------------------------------

268
Games / Re: OpenTTD 1.10.3 for OS/2
« on: September 03, 2020, 06:13:02 pm »
This
2016/06/30  13:58:05  10527     C:\usr\lib\SDL12.dll
SDL anmp 1.2.15-5 i686

Saludos

269
Games / Re: OpenTTD 1.10.3 for OS/2
« on: September 03, 2020, 05:02:01 pm »
Hello
I wanted to try this game.
But the installation is making me difficult.

The necessary library says it is the * sdl * but by another place I have seen that it says the * SDL *,
the question is which of the two?
I have tried both and it does not start me.
On the other hand, it says that you have to edit the * openttd.cfg * file, but I can't find it.


[D:\openttd-1.10.3-os2-20200903]dir open*

The volume label in drive D is DATS.
The Volume Serial Number is B4A7:75BD.
Directory of D:\openttd-1.10.3-os2-20200903

 9/08/10 22:34         11.620      0 a---  openmsx.obm
31/03/10 15:28     13.128.144    124 a---  opensfx.cat
31/03/10 15:28          9.356      0 a---  opensfx.obs
 3/09/20  6:32      5.184.499    488 a---  openttd.exe
 3/09/20  5:33      1.793.771      0 a---  openttd.map

 With *sdl*
[D:\openttd-1.10.3-os2-20200903]openttd.exe
SYS0191: SDL12 cannot be run in an OS/2 session.

 With *SDL*
[D:\openttd-1.10.3-os2-20200903]openttd.exe

[D:\openttd-1.10.3-os2-20200903]openttd.exe

[D:\openttd-1.10.3-os2-20200903]
Saludos

270
Setup & Installation / Re: ArcaOS 5.0.6 released
« on: September 01, 2020, 07:58:02 pm »
In my case after updating from DVD, everything is correct, in principle.
The problem was with the config.sys, The update modified this:
REM RUN = C: \ OS2 \ ACPIDAEMON.EXE
RUN = C: \ OS2 \ ACPIDAEMON.EXE

I changed it back to REM and the sound was perfect again, because it could be heard in sections.
Along with other improvements.
With the ANPM without problems.
The manjonng better.
saludos

Pages: 1 ... 16 17 [18] 19 20 ... 54