DARIUSZ ===> Begining of FOLDER VIEW crash <=== START XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:00 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:01 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:01 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:02 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:02 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:03 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:03 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:03 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:04 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:04 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:05 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:05 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:05 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:06 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:06 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1F (31) Thread slot ID: 0xE3 (227) Priority: 0x200 Thread identification: TID 0x1F (31) (SplitPopulate) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 02E10000 Limit: 02E57000 SS:ESP = 0053:02E567DC valid, flags: read write committed EBP = 02E56914 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 02E56914: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 02E5695C: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:07 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F67C valid, flags: read write committed EBP = 0004F7B4 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F7B4: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F7FC: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:07 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F67C valid, flags: read write committed EBP = 0004F7B4 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F7B4: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F7FC: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:08 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F67C valid, flags: read write committed EBP = 0004F7B4 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F7B4: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F7FC: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:08 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F67C valid, flags: read write committed EBP = 0004F7B4 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F7B4: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F7FC: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:08 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010206 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F67C valid, flags: read write committed EBP = 0004F7B4 valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F7B4: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F7FC: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:09 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010202 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F514 valid, flags: read write committed EBP = 0004F64C valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F64C: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F694: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:09 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010202 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F514 valid, flags: read write committed EBP = 0004F64C valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F64C: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F694: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:10 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010202 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F514 valid, flags: read write committed EBP = 0004F64C valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F64C: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F694: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:12 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010202 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F514 valid, flags: read write committed EBP = 0004F64C valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F64C: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F694: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:13 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010202 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F514 valid, flags: read write committed EBP = 0004F64C valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F64C: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F694: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit XWorkplace trap message -- Date: 2017-06-25, Time: 22:37:20 ----------------------------------------------------------- An internal error occurred in XWorkplace (XFLDR.DLL). Please send a bug report to xworkplace-user@netlabs.org so that this error may be fixed for future XWorkplace versions. Please supply this file (?:\xwptrap.log) with your e-mail and describe as exactly as possible the conditions under which the error occurred. Running XFLDR.DLL version: 1.0.11 built Dec 3 2016 Running OS/2 version: 20.45.0 (WSeB kernel) excHandlerLoud: Exception type: C0000005 Address: 1FD534CE Params: 00000001 00000010 XCPT_ACCESS_VIOLATION: XCPT_READ_ACCESS -- Invalid read access from 0x0053:00000010. Explanation: An attempt was made to access a memory object which does not belong to the current process. Most probable causes for this are that an invalid pointer was used, there was confusion with administering memory or error conditions were not properly checked for. Process information: Process ID: 0x1E Process module: 0x48E (G:\OS2\PMSHELL.EXE) Trapping module: 0x4A4 (G:\OS2\DLL\PMWP.DLL) Object: 1 Trapping thread information: Thread ID: 0x1 (1) Thread slot ID: 0x37 (55) Priority: 0x200 Thread identification: TID 0x1 (1) (Workplace thread) The following threads could be identified: PMSHELL Workplace thread ID: 0x1 NotifySentinel: ID 0xD (13) RefreshFindFolder: ID 0xE (14) RefreshNotificationPump: ID 0xF (15) NotifyServer: ID 0x10 (16) Party: ID 0x11 (17) Worker: ID 0x12 (18) Bush: ID 0x13 (19) Wimp: ID 0x14 (20) File: ID 0x15 (21) LazyIcons: ID 0x19 (25) SplitPopulate: ID 0x1E (30) SplitPopulate: ID 0x1F (31) Global lock semaphore is currently not owned. Registers: DS = 00000053 invalid ES = 00000053 invalid FS = 0000150B invalid GS = 00000000 invalid EAX = 00000000 invalid EBX = 0471D0DC valid, flags: read write committed ECX = 00000053 invalid EDX = 00000000 invalid ESI = 00000010 invalid EDI = 0471D0C0 valid, flags: read write committed Instruction pointer (where exception occurred): CS:EIP = 005B:1FD534CE valid, flags: read execute committed shared EFLAGS = 00010202 Stack: Base: 00040040 Limit: 0004FA40 SS:ESP = 0053:0004F514 valid, flags: read write committed EBP = 0004F64C valid, flags: read write committed Stack frames: Address Module seg:ofs CS:EIP : 1FD534CE PMWP 02:000534CE between SHCRT_atol + 0x3E and SHCRT_atoi - 0x12 0004F64C: 1FCB2BB0 PMWP 01:00012BB0 between FrameSubclassProc + 0x59C and obj_wpCnrSetEmphasis - 0x900 0004F694: 1FCB2D8A PMWP 01:00012D8A between FrameSubclassProc + 0x776 and obj_wpCnrSetEmphasis - 0x726 pulStackWord >= (PULONG)ptib->tib_pstacklimit DARIUSZ ===> Begining of FOLDER VIEW crash <=== END