Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - roberto

Pages: [1] 2
Hardware / usb wifi in arca50????
« on: October 17, 2017, 06:16:09 pm »
I was trying to run a usb-wifi TL-WN823N.
I used the to link the usb.
Then I followed the instructions on this website.
The system is Arca 50 updated.
And I get to the green message:
Attached the lantran.log
and the w2357x0109.inf (which you believe to test)
Any help to continue ??

Ibmworks, can not find the path specified in the ibmworks.ini file. Specifically, the Appointments application fails.

ClearLook, print failure to pdf, using pmpdf, gives me a error code 1-
Print ok, and you can create a ps file that is correct, but you can not create a pdf.

VirtualBox506 used as os2 host and as guest xp, can not read an image.iso from xp. But if it works with the original CD in the cd drive.
In a new installation of the vbox, it happened to me that with the cd inserted did not start the installation, and unplugging and plugging the usb mouse, the installation continued, but I had to do this during all the first part of the xp installation. For the first part of the installation I mean even before the rebound of the xp system. Then I run everything ok.

After this installation, I seemed to see for a second, that when I plugged a usb unit HD jfs 2t, that the LVM / Rediscoverprm, showed me the unit S (dvd-unit), but then appeared the correct new unit that was the G.
As it was only a second that appeared the poster, I'm not sure, and I have not been able to repeat it.


Multimedia / USB 10.216 and youtube videos
« on: March 24, 2017, 11:31:07 pm »
I recently installed this version of USB 10.216. And the problem with the videos persisted, I have to press the on-off wifi to continue watching the videos.
But if I kill the process u: \ os2 \ usbmon.exe and boot the firefox works perfect.
In my opinion this program interferes with the driver.

Storage / Someone has seen this before os2.ini
« on: February 02, 2017, 09:08:25 am »
Every approximately 2 minutes shows me the message of the photo.
The c: drive with the system is a 30gb partition with the system occupying only 1gb approximately.But if I open drives it shows me zero free space.

The system is an updated ecs22b2
The hard drive is a ssd thosiva.

Applications / Can I use a usb port as a com-port?
« on: January 28, 2017, 11:53:43 am »
The case is that I wanted to use a circuit board with 8 relays that has a usb connection.
And I was thinking of using it with the rxcom.dll with rexx.

Someone can tell me if I can or not? Or if I would have to install something to make it work.?


I recently received an email from a supplier known to me, with an attached PDF.
Thunderbird show me in the message this:
To protect your privacy, Thunderbird has blocked remote content in this message. and a button Preferences

option A- I do nothing with this message. I miss him completely. And I open the attached pdf, it takes me 28 seconds to open 40k. one page.???? But it is open ok.
option B- If instead of opening it from the thunderbird, I say from the thunderbird * save as *, I keep it on my hard drive and open it with lucide, it takes 1 or 2 seconds to open.

With option A, if I tell the Lucide, save as, in all cases the Save as failure, but does not show any error.
With the option B- If I tell the Lucide Save as, save it correctly.

After seeing this problem look at popuplog.os2 and showed me this:
11-05-2016  11:02:22  SYS3170  PID 006a  TID 0001  Slot 009e
EAX=032f0004  EBX=00000000  ECX=0013fbd8  EDX=13c80000
ESI=0000150b  EDI=00000000 
DS=0053  DSACC=d0f3  DSLIM=bfffffff 
ES=0053  ESACC=d0f3  ESLIM=bfffffff 
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=005b:13c1c5bf  CSACC=d0df  CSLIM=bfffffff
SS:ESP=0053:0013fc2c  SSACC=d0f3  SSLIM=bfffffff
EBP=0013fc44  FLG=00010283

PMMERGE.DLL 0004:000ff331

I preferred to send this issue to this list, because I still have not clear whether the problem is in the Lucide in Thunderbird, or even a pre Thunderbird problem.
If other users are aware of these differences, then you could open the ticket where appropriate.

Info about pdf file:
Nombre del documento: Factura de venta AA16003617.pdf
Título: Factura de venta AA16003617
Formato: PDF-1.2
Autor: delete by me
Palabras clave:
Creado con: wPDF by wpCubed GmbH
Producido con: Senior Factu por DSG Software, S.L.
Fonts in document:
Arial,Bold | TrueType | No | Arial fed
Arial | TrueType | No | Helvetica

The document is private, anyway I think the error comes before using the Lucide, not Lucide own.

Setup & Installation / Surprise with sound !! IN ECS2.2 B2
« on: October 07, 2016, 10:34:20 pm »
Today I happened to reinstall, the last update
This update, and it had installed previously but with the following differences:
This time I unpack the zip it on drive C: (The drive C: or boot, is valid only for installing the media. But to unzip the zip?)
And install the debug version, not the runtime , and restart. And now the system is updated with Arca packs.

One or more of these things cause the sound to be heard, before nothing was heard.

wav is ok
midi not is ok
mp3 is ok
In principle they sound just out by the helmets that plugs into a laptop.
With the pm123 program, running a mp3, the sound output from the headphones, and if I upload the volume to maximum, without disconnecting helmets, also goes by the laptop. But when the volume distortion is very large, and if it does not sound volume under.
With the pm123 program running, I have also seen that the system hangs.
I have generated the log file, if someone may be interested.
I have left to try more.


Applications / anpm question problem DUMPPROC / PROCDUMP
« on: September 29, 2016, 10:35:17 am »
In other pc when I want to update, give me this error:
Executing: @python D:\TOOLS\ANPM\scripts\ libc-0.6.6-30.oc00.i686

Killed by SIGABRT
pid=0x007c ppid=0x007b tid=0x0001 slot=0x001e pri=0x0200 mc=0x0001 ps=0x0010
Process dumping was disabled, use DUMPPROC / PROCDUMP to enable it.
Return code: 0

In all the packages that I want to update is the same error message.
What I can made with dumpproc? and how.

Applications / Mahjongg problems after memory is ok
« on: September 07, 2016, 11:00:56 pm »
If you select Options-setting-Automatically display hints selected, If run in automatic is ok, but it run by hand , the aplication fail.
Mouse pointer?
Graphic problem?


Applications / Error updating with anpm
« on: August 25, 2016, 04:17:08 pm »
The error log said:

----------[ 25 Aug 2016 15:50:46 ]----------
Executing: @python D:\TOOLS\anpm\scripts\
Setting up yum
Initializing pipe
Pipe connected.
Setting up callbacks
Adding temporary repositories
Initializing cache
Setting up repos
Now checking metadata
Return code: 0
----------[ 25 Aug 2016 15:51:04 ]----------
Executing: @python D:\TOOLS\anpm\scripts\
Setting up yum
Adding temporary repositories
Initializing cache
Requesting package list
Return code: 0
----------[ 25 Aug 2016 15:51:50 ]----------
Executing: @python D:\TOOLS\anpm\scripts\
Return code: 0
----------[ 25 Aug 2016 15:52:05 ]----------
Executing: @python D:\TOOLS\anpm\scripts\
Running Transaction Check
Warning: RPMDB altered outside of yum.
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
glib2-2.33.12-2.oc00.i686 has missing requires of libgobject-2_0-0 = ('0', '2.33.12', None)
sh: 1: /@unixroot/var/tmp/rpm-tmp.wLJR7p: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.Cx3987: Invalid executable file format
error: %prein(coreutils-8.25-1.oc00.i686) scriptlet failed, exit status 2
warning: %post(coreutils-8.25-1.oc00.i686) scriptlet failed, exit status 2

Error:  Rpmdb checksum is invalid: dCDPT(pkg checksums)
Return code: 0
----------[ 25 Aug 2016 15:55:58 ]----------
Executing: @python D:\TOOLS\anpm\scripts\
Setting up yum
Adding temporary repositories
Initializing cache
Requesting package list
Return code: 0

===========end log file=========
In display error see attach file.

What am I supposed to do now?


Networking / RTL8169 Problems
« on: May 18, 2016, 01:06:07 pm »
I 've finally decided to install a server with more updates ecs22b2
The new PC has a Blast Broadcom network - Nextreme BCM5764M PCIe Gigabit Ethernet , which I did not find drivers.
I install a old 3com 3c900 that is runing ok, in lan0, ip, but slow. (this is now running)
Buy another TP-Link model no TG-3269 that is a realtek RTL8169 (give me problems), is in lan1, with ip
This rtl8169 have a mini cd with drivers for compiler.

The problem is:
In a command com, show this:
Code: [Select]
PING 56 data bytes
64 bytes from icmp_seq=0. time=0. ms
64 bytes from icmp_seq=1. time=0. ms
64 bytes from icmp_seq=2. time=0. ms

---- PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms)  min/avg/max = 0/0/0

PING 56 data bytes

---- PING Statistics----
8 packets transmitted, 0 packets received, 100% packet loss

[C:\]net view
Server Name            Remark
The command completed successfully.


The lantran.log show this:
Code: [Select]
IBM OS/2 LANMSGDD [05/21/04] 6.00 is loaded and operational.
TCPBEUI: Using a 32-bit data segment.
Installing NETWKSTA.200 Version 6.0. IBM LAN Redirector ( May 25, 2005)

Adapter 0 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications.
Adapter 1 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications.
NETBIOS 4.0 is loaded and operational.
R8169 NDIS device driver @#Arca Noae LLC:1.0.2#@##1## 3 Sep 2015 15:26:18      DAZAR1    ::::2::SVN48@@Realtek 8169/1Gb PCIe MAC Driver Copyright (c) 20
R8169 Hardware detected: RTL8169sb/8110sb.
IBM LANVDD is loaded and operational.
IBM OS/2 LAN Netbind
TCPBEUI: Logical adapter 0 is bound to TCP/IP interface lan0.
TCPBEUI: Logical adapter 1 is bound to TCP/IP interface lan1.

The testlog.cmd give me this: extract no full file!
Code: [Select]
----- Output of: bldlevel C:\ibmcom\macs\R8169.os2 -----------------------------
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Arca Noae LLC:1.0.2#@##1## 3 Sep 2015 15:26:18      DAZAR1    ::::2::SVN48@@Realtek 8169/1Gb PCIe MAC Driver Copyright (c) 2014 Arca Noae LLC
Vendor:          Arca Noae LLC
Revision:        1.00.2
Date/Time:       3 Sep 2015 15:26:18   
Build Machine:   DAZAR1   
FixPak Version:  SVN48
File Version:    1.0.2
Description:     Realtek 8169/1Gb PCIe MAC Driver Copyright (c) 2014 Arca Noae LLC
----- Output of: type R8169$ ---------------------------------------------------
The device does not recognize the command.
----- Contents of file: C:\ibmcom\lantran.log ----------------------------------

The net view is ok, but the ping fail.
Any help or sugestion?


After doing some tests with the open office , and new sources wpsn -bit and wpsbold -bit, they are working very well. In firefox screen too. And despite being larger bitmap fonts generate smaller files, which the droid serif font . Deputy examples , with the same text .
With the added advantage that caven more letters per line of text , with a correct reading.

But the same source wpsn , NOBIT not work for me either screen or printer.
It can be repaired ? Or am I missing something ?
To load the font in the psprint printer, select font manager adds , save source , in my case aprox.40 seconds wait , I have this printer wifi. Disconnect the output port , or put it to file , and delete the source. Thus it will delete the font manager .But is ready in printer.
Deputy some tests , each file is associated with their number 1,2,3 . The 4 does not have correct impression.

Applications / ECO SOFTWARE ? How recreate icons for start program?
« on: March 31, 2016, 08:28:13 pm »
I install the new version, and give me a error message, when go to run eco software. Similar to ecomedia.dll error.
I delete in warpin all ecosoft, and install again with warpin. But I have not icon for start.
I repair the inis with xfix.

Setup & Installation / Anomaly in memory config
« on: March 28, 2016, 01:38:54 pm »
In ecs2.0, I have modify manual the memory to this:
set VIRTUALADDRESSLIMIT=3072, the system is restart
but when I open the eComStation Kernel, Memory, this display 512mb.
I move the bar to 3072, will confirm aply , modify the confyg.sys , and the program adds these lines to me CONFIG.SYS  :



No is the same set virtualaddresslimit, and virtualaddresslimit ?

I am not sure if this problem is only in my system, but I test it with e.exe and with dbexpert, the font with problems is Workplace sans normal, the font Workplace sans bold is ok. Only when print it with psprint, or when I create a ps file before print.


Pages: [1] 2