ZEOS Pantera P90 Flash BIOS

From OS2World.com Wiki
Jump to: navigation, search

Return to The Warp Pharmacy:Hardware

Contents

USER MAY GET SYS3175 IN INSTALL.EXE WHILE INSTALLING WARP ON ZEOS PANTERA SYSTEM

Last updated: 11 Feb 1995

DESCRIPTION OF SYMPTOMS

User may get the following SYS3175 in Install.exe during OS/2 3.0 Installation on Zeos Pantera P90 System.

 *************** SYS3175 32-bit***************
 A program generated an acess violation at 0004d8a9
 install.exe 0004:0000d8a9
 P1=00000008 P2=000000a0 P3=xxxxxxxx P4=xxxxxxxx  EAX=00000000
 EBX=00000004 ECX=00000005 EDX=bed80127
 ESI=00000d22 EDI=00005628
 DS=008f  DSACC=00f3  DSLIM=0000d12f
 ES=0127  ESACC=00f3 ESLIM=00000d22
 FS=150b  FSACC=00f3  FSLIM=00000030
 GS=0000 GSACC=****  GSLIM=********
 CS:EIP=0027:0000d8a9 CSACC=00fb CSLIM=0000daa9
 SS:EIP=008f:0000a7d2 SSACC=00f3  SSLIM=0000d12f
 EBP=0000a7e8 FLG=00012246
 *************** SYS3175 32-bit End ***********

SUMMARY OF RESOLUTION

Contact Zeos Technical Support for Bios Upgrade Information.

DETAILS OF RESOLUTION

If a system has a Flash Bios Version less than V9.0, user needs to upgrade his Bios to 9.0 which can be downloaded from Zeos Bulletin Board System at 612-362-1219. Once the bios is upgraded, the hardware settings for IDE drive in CMOS should be configured as following.

Multi Sector = Disable
Pre Set      = Disable
LBA          = Enable

For more info, please contact Zeos Technical Support.

Source

ftp://software.watson.ibm.com/pub/os2/info/zeos90.txt

Return to The Warp Pharmacy:Hardware