HP Probook 6570b Hardware Report

From OS2World.com Wiki
Revision as of 01:44, 2 October 2017 by Martini (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

PCI.EXE

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2017.03.10 of pci.ids using ids2devs version 1.03"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 37
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 0154h 3rd Gen Core processor DRAM Controller
 Command 0006h (Memory Access, BusMaster)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 09h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 2, Device Function 0
 Vendor 8086h Intel Corporation
 Device 0166h 3rd Gen Core processor Graphics Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Fast Timing)
 Revision 09h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Display, type VGA
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : D4000000h
 Address 2 is a Memory Address (64-bit, Prefetchable) : C0000000h
 Address 4 is an I/O Port : 4000h..403Fh
 System IRQ 16, INT# A
 New Capabilities List Present:
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 20, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1E31h 7 Series/C210 Series Chipset Family USB xHCI Host Controller
 Command 0002h (Memory Access)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI), programming interface 30
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : D4720000h
 System IRQ 10, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses

 Bus 0 (PCI Express), Device Number 22, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1E3Ah 7 Series/C216 Chipset Family MEI Controller #1
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 04h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Simple Communication, type Other
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : D4734000h
 System IRQ 16, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses

 Bus 0 (PCI Express), Device Number 25, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1503h 82579V Gigabit Network Connection
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : D4700000h..D471FFFFh
 Address 1 is a Memory Address (0-4GiB) : D473A000h..D473AFFFh
 Address 2 is an I/O Port : 4060h..407Fh
 System IRQ 17, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
       700 mW D0 power consume
       700 mW D0 power dissipate
       200 mW D3 power consume
       200 mW D3 power dissipate
         0 mW common logic power consume
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 26, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1E2Dh 7 Series/C216 Chipset Family USB Enhanced Host Controller #2
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : D4739000h..D47390FFh
 System IRQ 16, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 27, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1E20h 7 Series/C216 Chipset Family High Definition Audio Controller
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Multimedia, type Unknown!
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : D4730000h..D4733FFFh
 System IRQ 22, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root Complex Integrated Endpoint Device
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (00h)!!
       Maximum Link Width : xReserved
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : Unknown (00)!!
       Current Link Width : x0

 Bus 0 (PCI Express), Device Number 28, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1E10h 7 Series/C216 Chipset Family PCI Express Root Port 1
 Command 0407h (I/O Access, Memory Access, BusMaster, Interrupt Disable)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision C4h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 System IRQ 17, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 0000h
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : D4600000h..D46FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (02h)!!
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Slot Power Limit Value :   0.020 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 103Ch
     SSID  : 17ABh
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 1
 Vendor 8086h Intel Corporation
 Device 1E12h 7 Series/C210 Series Chipset Family PCI Express Root Port 2
 Command 0407h (I/O Access, Memory Access, BusMaster, Interrupt Disable)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision C4h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 System IRQ 16, INT# B
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 34
   Secondary Bus Command 0000h
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : 2000h..3FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : D0000000h..D3FFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (02h)!!
       Maximum Link Width : x1
       Link Port Number   : 2
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   4.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 103Ch
     SSID  : 17ABh
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 2
 Vendor 8086h Intel Corporation
 Device 1E14h 7 Series/C210 Series Chipset Family PCI Express Root Port 3
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision C4h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 System IRQ 18, INT# C
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 35, Subordinate Bus number 35
   Secondary Bus Command 0000h
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : D4500000h..D45FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (02h)!!
       Maximum Link Width : x1
       Link Port Number   : 3
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Slot Power Limit Value :   6.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 103Ch
     SSID  : 17ABh
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 3
 Vendor 8086h Intel Corporation
 Device 1E16h 7 Series/C216 Chipset Family PCI Express Root Port 4
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision C4h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 System IRQ 19, INT# D
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 36, Subordinate Bus number 36
   Secondary Bus Command 0000h
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : D4400000h..D44FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (02h)!!
       Maximum Link Width : x1
       Link Port Number   : 4
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Slot Power Limit Value :   8.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 103Ch
     SSID  : 17ABh
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 29, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1E26h 7 Series/C216 Chipset Family USB Enhanced Host Controller #1
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : D4738000h..D47380FFh
 System IRQ 16, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1E59h HM76 Express Chipset LPC Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 04h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device 1E03h 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type Serial ATA (AHCI 1.0)
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is an I/O Port : 4088h..408Fh
 Address 1 is an I/O Port : 4094h..4097h
 Address 2 is an I/O Port : 4080h..4087h
 Address 3 is an I/O Port : 4090h..4093h
 Address 4 is an I/O Port : 4040h..405Fh
 Address 5 is a Memory Address (0-4GiB) : D4737000h..D47377FFh
 System IRQ 19, INT# B
 New Capabilities List Present:
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 32-bit addresses
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Unknown Capability (Code 12h)!!
   Unknown Capability (Code 13h)!!

 Bus 35 (PCI Express), Device Number 0, Device Function 0
 Vendor 197Bh JMicron Technology Corp.
 Device 2380h IEEE 1394 Host Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 30h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Serial, type OHCI FireWire
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : D4500000h..D45007FFh
 Address 1 is a Memory Address (0-4GiB) : D4505000h..D45050FFh
 System IRQ 18, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses

 Bus 35 (PCI Express), Device Number 0, Device Function 1
 Vendor 197Bh JMicron Technology Corp.
 Device 2392h SD/MMC Host Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 30h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class System, type Other
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : D4504000h..D45040FFh
 System IRQ 18, INT# A
 Expansion ROM of 32 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses

 Bus 35 (PCI Express), Device Number 0, Device Function 2
 Vendor 197Bh JMicron Technology Corp.
 Device 2391h Standard SD Host Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 30h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class System, type SD Host Controller (With DMA)
 Subsystem ID 17AB103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : D4503000h..D45030FFh
 System IRQ 18, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses

 Bus 36 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 0085h Centrino Advanced-N 6205 [Taylor Peak]
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 34h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Network, type Other
 Subsystem ID 13118086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : D4400000h
 System IRQ 19, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:7E00h
 Table Version 1.0 - OK
 Table size 416 bytes - OK
 Table Checksum FFh - OK
 PCI Interrupt Router: HM76 Express Chipset LPC Controller
 IRQ's dedicated to PCI : None
  Error: table entries 10 and 15 refer to the same Bus=255/Device=0!
  Error: table entries 10 and 16 refer to the same Bus=255/Device=0!
  Error: table entries 10 and 17 refer to the same Bus=255/Device=0!
  Error: table entries 15 and 16 refer to the same Bus=255/Device=0!
  Error: table entries 15 and 17 refer to the same Bus=255/Device=0!
  Error: table entries 16 and 17 refer to the same Bus=255/Device=0!
  Error: connectivity mismatches for link value 61:
    Bus=0 Device=22 Pin=INTB# Map=7,10,11,15 
    Bus=255 Device= 0 Pin=INTB# Map=None
  Error: connectivity mismatches for link value 62:
    Bus=0 Device=22 Pin=INTC# Map=7,10,11,15 
    Bus=255 Device= 0 Pin=INTC# Map=None
  Error: connectivity mismatches for link value 63:
    Bus=0 Device=22 Pin=INTD# Map=7,10,11,15 
    Bus=255 Device= 0 Pin=INTD# Map=None
 The ROM PCI IRQ routing table appears to be faulty!!

IRQ Summary: IRQs 10,16,17,18,19,22 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 5 PCI Devices
             IRQ 17 is shared by 2 PCI Devices
             IRQ 18 is shared by 4 PCI Devices
             IRQ 19 is shared by 3 PCI Devices

IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...