Lenovo ThinkPad L512: Difference between revisions
(Created page with "thumb ==General Specs== * '''Model Number:''' * '''Processor:''' * '''Memory:''' * '''HDD:''' * '''Graphics:''' * '''Release Year:'''2010 =...") |
No edit summary |
||
Line 8: | Line 8: | ||
* '''Release Year:'''2010 | * '''Release Year:'''2010 | ||
==General Comments== | |||
By Kreso: | |||
1: Sorry to resurrect old post but since it is related to ecs installation and AHCI than it may be of interest. Hardware: LENOVO TP L512, i5, 500GB sata HD, sata CD/DVD. For beginning this should be enough. Problem: Booting from internal CD in AHCI mode - fail. Must be in COMPATIBILITY mode (BIOS). After first phase (first reboot) TP crashed. Reseting mode to AHCI (BIOS) system start to boot from HD but than fail with known msg: OS/2 cannot operate your HD or ... That happens when DANI driver should be loaded, as meter of fact it start to load because there is first line of Dani driver ( /V in config,sys) Version of Danis506 is 1.8.7. | |||
2: So Guys there is a progress. EcS v2 is installed. Here is HOW: | |||
1. BIOS - COMPATIBILITY | |||
2. My own values on preboot screen | |||
3. At the end of phase1 (reboot delay 20s) - eject CD | |||
4. Boot Manager - EcS (booting from HD) - inserting CD 1 | |||
5. My surprise boot continue | |||
6. Choose options | |||
7. phase 2 finished (repeat as phase 1) | |||
8. reboot | |||
9. finish installation | |||
10. reboot ALL OK I am happy, very happy Cheesy Cheesy Cheesy | |||
Tried with AHCI - NO GO. Same as before - Dani and OS/2 cannot operate HD... | |||
There is difference between R60 and L512 in AHCI implementation. | |||
One more interesting think: with acpi enabled with SMP system shows 4 processors. | |||
Pete: You are right. During last installation I change it to HPFS. Volume is compatible not LVM. | |||
Next step is network. That I did not configure yet. I will do that at home. | |||
==Links== | ==Links== |
Latest revision as of 19:20, 24 September 2017
General Specs
- Model Number:
- Processor:
- Memory:
- HDD:
- Graphics:
- Release Year:2010
General Comments
By Kreso:
1: Sorry to resurrect old post but since it is related to ecs installation and AHCI than it may be of interest. Hardware: LENOVO TP L512, i5, 500GB sata HD, sata CD/DVD. For beginning this should be enough. Problem: Booting from internal CD in AHCI mode - fail. Must be in COMPATIBILITY mode (BIOS). After first phase (first reboot) TP crashed. Reseting mode to AHCI (BIOS) system start to boot from HD but than fail with known msg: OS/2 cannot operate your HD or ... That happens when DANI driver should be loaded, as meter of fact it start to load because there is first line of Dani driver ( /V in config,sys) Version of Danis506 is 1.8.7.
2: So Guys there is a progress. EcS v2 is installed. Here is HOW:
1. BIOS - COMPATIBILITY 2. My own values on preboot screen 3. At the end of phase1 (reboot delay 20s) - eject CD 4. Boot Manager - EcS (booting from HD) - inserting CD 1 5. My surprise boot continue 6. Choose options 7. phase 2 finished (repeat as phase 1) 8. reboot 9. finish installation 10. reboot ALL OK I am happy, very happy Cheesy Cheesy Cheesy
Tried with AHCI - NO GO. Same as before - Dani and OS/2 cannot operate HD...
There is difference between R60 and L512 in AHCI implementation.
One more interesting think: with acpi enabled with SMP system shows 4 processors.
Pete: You are right. During last installation I change it to HPFS. Volume is compatible not LVM.
Next step is network. That I did not configure yet. I will do that at home.
Links
- OS2World Forum Discussion [1]