No sound from PAS-16
Last Updated: 27th November, 1994
Symptoms
No sound from PAS-16 Plus sound adapter following Selective Install and alterations to CONFIG.SYS per Warp User's Guide Chapter 19.
Hardware
Media Vision Pro Audio Spectrum 16 Plus adapter
Media Vision Pro Audio 16 Basic adapter
(possibly other PAS-16 family adapters)
Problem
Bad MVPRODD.SYS driver in Warp GA.
Fix
Obtain a new driver from the Media Vision BBS (510-770-0527). The driver is in OS2.EXE, which is a self-extracting archive (194972 bytes).
For comparison purposes, here are the drivers:
MVPRODD.SYS (BBS) 9-21-93 3:09p 59480 MVPRODD.SYS (Warp) 10-08-94 4:02a 51246
Notes
The MVNOTES.DOC file from OS2.EXE also recommends making a change to the MMPM2.INI PARMSTRING value.
If you are experiencing white noise (hiss) prior to OS/2 Warp system sounds, try adding a /T:1 parameter to your MVPRODD.SYS entry in CONFIG.SYS.
Also, be aware that installing the OS/2 PAS-16 drives via Selective
Install does not appear to update the Win-OS/2 drivers. To get
PAS-16 sounds with Win-OS/2, You'll need to start up a Win-OS/2
session, open the Control Panel (in Main), and do a Drivers / Add
for the "Unlisted" drivers in \OS2\DRIVERS\MVPRODD.
Media Vision is now shipping PAS-16 adapters with a new, improved
chipset (MV-508-B) which replaces the older MV-508-A chipset. The
drivers shipped with Warp do not support the new chipset. It is
not yet clear whether the OS/2 driver from the Media Vision BBS
supports this chipset properly.