Redd1
Jump to navigation
Jump to search
Installing Warp on a System With CD-ROM (Toshiba) Connected to an Adaptec 1542C, GETTING A RED SCREEN NO CD-ROM DEVICE SUPPORT Found
Last updated: 27 Dec 1994
DESCRIPTION OF SYMPTOMS
Red screen on DISK #1, message no CD-ROM device support found.
RESOLUTION
Under the Adaptec setting option (Ctrl+A), disable the FAST SCSI and Synchronize option. This will enable OS/2 WARP install DISK #1 to recognize the CD-ROM.
Note: The system has also a SoundBlaster card, but the CD-ROM (Toshiba) is connected to the Adaptec 1542C SCSI controller.