Vonets VAP11N WiFi N Bridge & Repeater: Difference between revisions

From OS2World.Com Wiki
Jump to navigation Jump to search
No edit summary
Line 10: Line 10:
Once you have it connected to your ethernet port and power with the USB, you can configure this device with Firefox by accessing http://vonets.cfg
Once you have it connected to your ethernet port and power with the USB, you can configure this device with Firefox by accessing http://vonets.cfg
You can browse the wifi network that you want to connect to.
You can browse the wifi network that you want to connect to.
===Configuration===
It may change according to your networks settings but on my case the http://vonets.cfg works under the 192.168.1.88 IP address. You can access from your browser and scan the wifi networks available.
Select the wifi network, add the correct access password and it will ask you to reboot the router.


==Links==
==Links==

Revision as of 16:46, 13 November 2017

General Specs

  • Convert/Connect Ethernet port to Wifi.
  • IEEE 802.11N standard.
  • Compatible with IEEE 802.11B and IEEE 802.11G standard.

General Comments

It works fine under OS/2 or ArcaOS. It does not require special driver, only your network ethernet port needs to be configured and working. This device converts connects the ethernet port to a Wifi network. The USB port is only used for power.

Once you have it connected to your ethernet port and power with the USB, you can configure this device with Firefox by accessing http://vonets.cfg You can browse the wifi network that you want to connect to.

Configuration

It may change according to your networks settings but on my case the http://vonets.cfg works under the 192.168.1.88 IP address. You can access from your browser and scan the wifi networks available.

Select the wifi network, add the correct access password and it will ask you to reboot the router.

Links

  • Product Page [1]