OS/2, eCS & ArcaOS - Technical > Networking

Cannot start peer services

<< < (2/4) > >>

karotlopj:

--- Quote from: John Poltorak on June 02, 2016, 08:30:49 am ---
--- Quote from: Alex Taylor on June 02, 2016, 05:28:19 am ---This usually means a network connectivity or configuration problem.

Try looking at \IBMCOM\LANTRAN.LOG and/or the output of 'net error' for clues.

--- End quote ---

The last line says

--- Quote ---LT00141: Errors occurred while attempting to initialize TCPBEUI.

--- End quote ---

--- End quote ---

As I said in the first msg


--- Quote ---I have both TCP/IP and NETBIOS over TCP/IP configured for the NIC.
--- End quote ---

I also have a Thinkpad T41p with the exact same PROTOCOL.INI which is running LAN Server without any problem.

Andi B.:

--- Quote from: John Poltorak on June 02, 2016, 08:30:49 am ---....
The last line says

--- Quote ---LT00141: Errors occurred while attempting to initialize TCPBEUI.

--- End quote ---

--- End quote ---
It should be clear that Netbios over TCP/IP (and peer/requester) can not work without working TCPBEUI. Maybe the lines you did not post can give a clue what's wrong with your setup. But we do not know...

karotlopj:

--- Quote ---IBM OS/2 LANMSGDD [11/02/01] 6.00 is loaded and operational.
IBM OS/2 TCPBEUI 6.00.0
TCPBEUI: Using a 32-bit data segment.
Installing NETWKSTA.200 Version 6.0. IBM LAN Redirector ( Oct 10, 2001)

IBM OS/2 NETBIOS 4.0
Adapter 0 has 123 NCBs, 28 sessions, and 6 names available to NETBIOS applications.
NETBIOS 4.0 is loaded and operational.
IBM LANVDD is loaded and operational.
IBM OS/2 LAN Netbind
TCPBEUI: Logical adapter 0 is bound to TCP/IP interface lan0.

--- End quote ---

That's the bit before the error.... looks perfectly normal. TCP/IP works OK.

PROTOCOL.INI  looks normal.... I guess it must be something in IBMLAN.INI causing the problem - unless it's a resource issue....

roberto:

--- Quote from: John Poltorak on June 02, 2016, 01:15:23 pm ---
That's the bit before the error.... looks perfectly normal. TCP/IP works OK.

PROTOCOL.INI  looks normal.... I guess it must be something in IBMLAN.INI causing the problem - unless it's a resource issue....

--- End quote ---
I see this error yesterday in me old Asus laptoop Z83C. I can not start the requester.
I install from the CD, the ecs22b2 + all the updates , after run Dfsee for repartition all the disk, and run minilvm for install a bmr , and after that install airboot. I can not install airboot without install the ibm bmr. Although not use the bmr.
ERROR in start requester.
Reinstall again, ERROR in requester???? The first time I see this error.
Reinstall again, but FORMAT WITH ERROR CHECK SLOW, without the updates all is ok. I only have to install the updates, but I think that the solution is in format.
Saludos

Andi B.:

--- Quote ---The same thing happens on both a ThinkPad T41 and T42
--- End quote ---
It does not happen on my T41 and T42p. And even not on my T60.


--- Quote from: John Poltorak on June 02, 2016, 01:15:23 pm ---PROTOCOL.INI  looks normal.... I guess it must be something in IBMLAN.INI causing the problem - unless it's a resource issue....

--- End quote ---
My protocol.ini and my ibmlan.ini looks normal too. Maybe we've a different understanding what 'looks normal' mean. Or we do have installed peer or drivers different. I don't know.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version