Author Topic: Cannot start peer services  (Read 5110 times)

Andreas Kohl

  • Sr. Member
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 12
  • Posts: 280
    • View Profile
    • warpserver.de
Re: Cannot start peer services
« Reply #15 on: June 03, 2016, 03:33:41 pm »
Quote
IBM OS/2 NETBIOS 4.0
Adapter 0 has 123 NCBs, 28 sessions, and 6 names available to NETBIOS applications.
NETBIOS 4.0 is loaded and operational.
IBM LANVDD is loaded and operational.
IBM OS/2 LAN Netbind
TCPBEUI: Logical adapter 0 is bound to TCP/IP interface lan0.

That shows how it's wrong configured. TCPBEUI cannot have a logical adapter number of 0. Change the number in MPTS to 1 or another unused number and it will run.

PROTOCOL.INI  looks normal.... I guess it must be something in IBMLAN.INI causing the problem - unless it's a resource issue....
[/quote]

Pete

  • Hero Member
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 35
  • Posts: 815
    • View Profile
Re: Cannot start peer services
« Reply #16 on: June 03, 2016, 04:18:31 pm »
Hi Andreas

Quote

That shows how it's wrong configured. TCPBEUI cannot have a logical adapter number of 0. Change the number in MPTS to 1 or another unused number and it will run.



It works fine with TCPBEUI logical adapter number of 0 here on several systems so the above is not the answer.

The LT00141 error is usually indicative of a tcpip misconfiguration.


Regards

Pete


roberto

  • Sr. Member
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 8
  • Posts: 455
    • View Profile
Re: Cannot start peer services
« Reply #17 on: June 05, 2016, 10:18:28 am »
Hi Andreas

Quote

That shows how it's wrong configured. TCPBEUI cannot have a logical adapter number of 0. Change the number in MPTS to 1 or another unused number and it will run.

This can be right if you are running Samba Server

Quote
It works fine with TCPBEUI logical adapter number of 0 here on several systems so the above is not the answer.

Yes, work fine, with 0

The better solution for this problem START REQUESTER, that I found is restore from a backup from other system that is running well. Change if is necesary the net adapters, etc.... and ready.

saludos