So, the printer is connected and working with OS/2 using the network port, right? Using SLPR port over TCP/IP, right?
Network : is yes, tcpip is yes,
SLPR el puerto slpr es muy sencillo de usar y configurar, solo tiene dos valores la ip de la impresora y el nombre de host. Similar a 192.168.1.101 y dhcppc1. Para conocer el nombre de host solo necesitas encender la impresora y que te imprima las configuraciones de red. Por la pantalla le puedes poner la ip que tu quieras.
Remember that I'm not good with printers, I knot that printers are important, but I just don't use them much.
This is one of the printers I've had and I have been easier to configure I installed. You just have to open install printer and the drivers that you have installed in your system to select the model that I told you earlier. But for any question you have this forum.
I have a couple of comments to ask you, the price of the Tonner in Lexmark is higher than the price of the printer, look at it.
Also me to past that after installing this driver, the pmpdf that had configured to generate the PDF in automatic I stopped working, but I changed the driver of the printer PDFWriter that default is Apple Color ..12/600 by the c750 and all OK.
Also the Dbexpert when it was connected to a xerox6500 for print, give me an error, but to see the configuration of the Xerox the Xerox driver itself,The driver himself suggested I change the UserID by - and the password for - and all OK. I run the xerox6500 with a psprint driver.
I tested the next programs with the CS410dn, pmview foto perfect, open office is ok, dbexpert is ok, lucide have same problems.(see previous comment)
Saludos