OS/2, eCS & ArcaOS - Technical > Setup & Installation

Install TCP/IP after installation with OS/2 3.0 Connect?

<< < (3/3)

Fahrvenugen:
Hi,

The 32 bit MPTS stack can still be downloaded right from IBM at:

ftp://service.boulder.ibm.com/ps/products/mpts/fixes/english-us/wr08610_conv/

You'll need to install the update at:

ftp://service.boulder.ibm.com/ps/products/mpts/fixes/english-us/wr08621/

and also grab newstack.zip from hobbes.

For the TCP/IP apps, once you've installed the TCP/IP apps on the CD, you'll need to install the fixpak at:

ftp://service.boulder.ibm.com/ps/products/tcpip/fixes/v3.1os2/un00959/

otherwise the apps don't work properly with the 32 bit stack in the MPTS above.

If I recall correctly, you also need to have first updated the base OS/2 Warp 3 install to a newer fixpak (FP 40 or so).  Otherwise there is stuff in the newer mpts which will trap.

FP 40 is at:

ftp://service.boulder.ibm.com/ps/products/os2/fixes/v3.0warp/english-us/xr_w040/

or

ftp://service.boulder.ibm.com/ps/products/os2/rsu/xr_w040/

Good luck!

Alex Taylor:
There are a few caveats involved in updating MPTS on Warp 4 without TCP/IP 4.1.  See: http://www.altsan.org/os2/fixpaks/mpts.html (especially the section at the bottom).

Navigation

[0] Message Index

[*] Previous page

Go to full version