You could try the later sane (scanimage) package.
You may also need the later libusb package - check date of any installed libusb10.dll against package date. If I remember correctly libusb handles usb without using usb drivers - apart from, possibly, the usb controller.
libusb uses usbresmg.sys & usbcalls which are part of the USB stack. Looks like I rebuilt it a while back to accomodate changes in these drivers - http://smedley.id.au/tmp/libusb-20161207.zip
I would also suggest the later sane package.
Cheers,
Paul
Hi Paul, using the latest scanimage,exe version did not prudiced anu change.
Then replacing the libusb10.dll whit the latest suggested version, took many output lines on prompt command scanimage.exe -L and -T, I paste here just the last ones as I cannot scroll up the previous lines on the command window:
libusb: 10.738000 debug [_sync_control_transfer] transferred 1
libusb: 10.741000 debug [os2_clock_gettime] clock 0
libusb: 10.747000 debug [libusb_get_next_timeout] next timeout in 0.971000s
libusb: 10.753000 debug [libusb_handle_events_timeout_completed] doing our own e
vent handling
libusb: 10.763000 debug [handle_events] poll() 3 fds with timeout in 971ms
libusb: 10.769000 debug [handle_events] poll() returned 1
libusb: 10.775000 debug [os2_handle_events]
libusb: 10.779000 debug [usbi_handle_transfer_completion] transfer 0x27e0120 has
callback 0x1e1056d1
libusb: 10.790000 debug [ctrl_transfer_cb] actual_length=1
libusb: 10.794000 debug [libusb_get_configuration] active config 1
libusb: 10.798000 debug [libusb_close]
libusb: 10.802000 debug [os2_close] close: fd 3145974
libusb: 10.810000 debug [usbi_remove_pollfd] remove fd 12
libusb: 10.816000 debug [libusb_get_config_descriptor] index 0
libusb: 10.820000 debug [os2_get_config_descriptor]
libusb: 10.829000 debug [os2_get_config_descriptor] len 8
libusb: 10.835000 debug [os2_get_config_descriptor]
libusb: 10.839000 debug [os2_get_config_descriptor] len 32
device `test:0' is a Noname frontend-tester virtual device
device `test:1' is a Noname frontend-tester virtual device
You say I would need to have the latest Sane version, but how I can integrate it in Tame/2 ?
Also, do I have to download/place your above zip file as well?
Thank you