The correct answer appears to be the ACPI one. Re-installing WarpIN makes no difference. With ACPIDAEMON.EXE terminated, WarpIN opens it's database normally.
Neil- I'm glad it's solved for you. From my point of view you can put a rem to the config.sys,
and sleep peacefully. Since this version came out ARCAOS 504, I am using it like this and without problems.
But I also tell you that L. Rosenthal told me that I had this problem by myself and it was 0.01% of the
teams. He advised me to modify the c:\mptn\etc\acpid.cfg.sample
You can modify this acpid.cfg file, but after a lot of testing I was unable to always operate properly.
I explain:
The cpu can work in two ways, and there are programs that work better in one way than the other, (not all)
Cpu type A
[C:\]cpu 3
No. of CPUs: 8
CPU 1 - Busy: 0.2%, Interrupt: 0.4%, Idle: 99.4%
CPU 2 - Busy: 0.2%, Interrupt: 0.0%, Idle: 99.8%
CPU 3 - Busy: 0.0%, Interrupt: 0.0%, Idle: 100.0%
CPU 4 - Busy: 0.0%, Interrupt: 0.0%, Idle: 100.0%
CPU 5 - Busy: 0.0%, Interrupt: 0.0%, Idle: 100.0%
CPU 6 - Busy: 0.3%, Interrupt: 0.0%, Idle: 99.7%
CPU 7 - Busy: 0.5%, Interrupt: 0.0%, Idle: 99.5%
CPU 8 - Busy: 0.0%, Interrupt: 0.0%, Idle: 100.0%
CPU 1 - Busy: 0.1%, Interrupt: 0.4%, Idle: 99.5%
CPU 2 - Busy: 0.2%, Interrupt: 0.0%, Idle: 99.8%
CPU 3 - Busy: 0.5%, Interrupt: 0.0%, Idle: 99.5%
CPU 4 - Busy: 0.0%, Interrupt: 0.0%, Idle: 100.0%
Cpu type B
The same but changing the Busy and Idle values
CPU 1 - Busy: 99.4%, Interrupt: 0.4%, Idle: 0.2%
etc...
The cpu type A and B are constantly passing from one point to another.
If you have 2 programs that one is comfortable at one end of the type A cpu and the other at Type B,
no matter how much you adjust acpid.cfg only one will work well. With my experience
Without the acpidaemon.exe the Truespectra pgpro.exe when starting it shows one or two black bars but
it works, if I turn on the acpidaemos.exe the pgpro.exe does not show the failure of the two black bars.
The other program is DBexpert, if I turn on acpidaemon.exe, dbexpert.exe crashes.
Turning off the acpidaemon.exe the dbexpert.exe works perfect. In your case the warpin.exe
Saludos