Author Topic: Updated Uniaud32 build  (Read 370585 times)

Paul Smedley

  • Hero Member
  • *****
  • Posts: 2092
  • Karma: +159/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #180 on: August 14, 2020, 12:12:51 pm »
Hi Dave,


  This 3.16 version is working here... Realtek-ALC887-VD.


Thanks for confirming. Now to try and fix it more elegantly, then work out why 3.18.140 is trapping on all hda hardware (but seems ok on the one ac97 system I can test on)

Cheers,

Paul.

Guillaume Gay

  • Newbie
  • *
  • Posts: 16
  • Karma: +2/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #181 on: August 14, 2020, 04:27:52 pm »
Bonjour to all,

"uniaud32-linux-3.16.85-20200814" works in a sense: it plays the startup sound in loop!
I reverted back to 2.02.06, since I needed to use my system.

{ uniaudio (until 2.02.06) seems to run out of resource after many days of system uptime. No more notification sounds. Short WAV files (less than 1sec or so) can't be used as system sounds, for example. I wondered if 3.16.85 worked better... }

See you !
« Last Edit: August 14, 2020, 09:54:56 pm by Guillaume Gay »
--
Guillaume GAY

Renee Senger

  • Newbie
  • *
  • Posts: 47
  • Karma: +0/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #182 on: August 14, 2020, 06:35:21 pm »
Hi Renee,

Hey All,

Updated to 3.16.85 - http://smedley.id.au/tmp/uniaud32-linux-3.16.85-20200812.zip


More one sound interface tested:

Detected UNIAUD version 2.02.05
Detected 1 audio adapter(s)
Card info for adapter 0:
  num: 0
  id: ICH5
  driver: ICH4
  name: Intel ICH5
  longname: Intel ICH5 with CMI9739 at irq 17
  mixer: C-Media Electronics CMI9739
  componenets: AC97a:434d4961

Tests were done with Package 20200506, uniaud32-linux-3.12.74, uniaud32-linux-3.14.79 and the last uniaud32-linux-3.16.85.
In all tests sound hardware is not identified by os/2 (ArcaOS 5.0.5), although uniaud32.sys is normally loading at boot.
Seems that are not any sound hardware. Applications like Klondike Solitaire, Mahjongg Solitaire, with sound enabled by default, show messages of "No device driver found" .

To know if was not an ALSA problem, I boot a live cd of linux Ubuntu 12.10 with ALSA version 1.0.24. All sound works as expected, without problems.

unimix -list resulted from uniaud32-linux-3.16.85 and pci.exe are attached.

An alsa log would be interesting.
copy alsahlp$ alsa-cmi9739.log

Hi, alsa-cmi9739log.txt is attached.

Paul Smedley

  • Hero Member
  • *****
  • Posts: 2092
  • Karma: +159/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #183 on: August 14, 2020, 11:54:21 pm »
Hi Guillaume,
"uniaud32-linux-3.16.85-20200814" works in a sense: it plays the startup sound in loop!
I reverted back to 2.02.06, since I needed to use my system.

{ uniaudio (until 2.02.06) seems to run out of resource after many days of system uptime. No more notification sounds. Short WAV files (less than 1sec or so) can't be used as system sounds, for example. I wondered if 3.16.85 worked better... }

See you !

Can you please upload the output of 'copy alsahlp$ alsa.log' - from any uniaud32 version - I just want to see what chipset you're running.

Cheers,

Paul

Paul Smedley

  • Hero Member
  • *****
  • Posts: 2092
  • Karma: +159/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #184 on: August 14, 2020, 11:56:24 pm »
Hi Renee,

Hey All,

Updated to 3.16.85 - http://smedley.id.au/tmp/uniaud32-linux-3.16.85-20200812.zip


More one sound interface tested:

Detected UNIAUD version 2.02.05
Detected 1 audio adapter(s)
Card info for adapter 0:
  num: 0
  id: ICH5
  driver: ICH4
  name: Intel ICH5
  longname: Intel ICH5 with CMI9739 at irq 17
  mixer: C-Media Electronics CMI9739
  componenets: AC97a:434d4961

Tests were done with Package 20200506, uniaud32-linux-3.12.74, uniaud32-linux-3.14.79 and the last uniaud32-linux-3.16.85.
In all tests sound hardware is not identified by os/2 (ArcaOS 5.0.5), although uniaud32.sys is normally loading at boot.
Seems that are not any sound hardware. Applications like Klondike Solitaire, Mahjongg Solitaire, with sound enabled by default, show messages of "No device driver found" .

To know if was not an ALSA problem, I boot a live cd of linux Ubuntu 12.10 with ALSA version 1.0.24. All sound works as expected, without problems.

unimix -list resulted from uniaud32-linux-3.16.85 and pci.exe are attached.

An alsa log would be interesting.
copy alsahlp$ alsa-cmi9739.log

Hi, alsa-cmi9739log.txt is attached.

This is likely the problem:
U16: Uniaud16 v1.9.7
OSS32_QueryDevCaps: SNDRV_PCM_IOCTL_HW_REFINE error -22

OSS32_QueryDevCaps failed

Uniaud16 can't query the device capabilities for whatever reason.

Cheers,

Paul

Ian Manners

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 464
  • Karma: +10/-0
  • I am the computer, it is me.
    • View Profile
    • ComKal Networks Australia
Re: Updated Uniaud32 build
« Reply #185 on: August 15, 2020, 09:42:19 am »
uniaud32-linux-3.16.85-20200812.zip

Works well with a Creative SB Live! 5.1
PMUniMax has also filled out with many sliders including ones for Surround+center playback, Front, Line2, LiveDrive, Coaxial,  headphone, but I have not tested any of them, yet.

Listening to Gustav Holst - The Planets
Very nice, even for a deaf bloke.

Thanks for your continuing work on various OS/2 drivers and software.

(added: undated to uniaud32-linux-3.16.85-20200814.zip and all still working well)
« Last Edit: August 15, 2020, 10:02:07 am by Ian Manners »
Cheers
Ian B Manners

Guillaume Gay

  • Newbie
  • *
  • Posts: 16
  • Karma: +2/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #186 on: August 15, 2020, 11:42:05 am »
Hi Paul from here as well!

[...]
"uniaud32-linux-3.16.85-20200814" works in a sense: it plays the startup sound in loop!
I reverted back to 2.02.06, since I needed to use my system.
[...]

Can you please upload the output of 'copy alsahlp$ alsa.log' - from any uniaud32 version - I just want to see what chipset you're running.

Cheers,

Paul

Please find attached "alsa-GG_20200814.txt" made with UNiAud v2.02.06 in use on this system.

Have a nice day!
--
Guillaume GAY

Eugene Tucker

  • Sr. Member
  • ****
  • Posts: 368
  • Karma: +12/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #187 on: August 15, 2020, 08:29:01 pm »
The latest drop is working on my Dell laptop now. I did nothing.

Paul Smedley

  • Hero Member
  • *****
  • Posts: 2092
  • Karma: +159/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #188 on: August 16, 2020, 03:20:05 am »
3.8.140 is now working on my virtualised ArcaOS system, I haven't had time yet to try on bare metal.

http://smedley.id.au/tmp/uniaud32-linux-3.18.140-20200816.zip

Just some background information - the way they apply "quirks" or workarounds for different hardware started changing from 3.16.x onwards. Currently, I haven't implemented the newer quirks as it's a bit of work due to Watcom's lack of C99 support. As a result, there is some hardware that may work better in 3.14.x than in newer builds.

In the fullness of time, I'll fully implement the quirks in 3.18.x

As some more background, ALSA 1.0.24 (which is the basis of the Uniaud driver shipped with ArcaOS 5.0.5) was released on 31st Jan 2011. The Linux 3.18 kernel was released in December 2014, and 3.18.140 in May 2019 - so we've advanced a few years :)
« Last Edit: August 16, 2020, 03:23:49 am by Paul Smedley »

Paul Smedley

  • Hero Member
  • *****
  • Posts: 2092
  • Karma: +159/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #189 on: August 16, 2020, 06:38:47 am »
OK... no traps but no sound on my T60 (Analog devices HDA) - will need to investigate...  no traps and perfect sound on my X250 (Realtek HDA)

Holger Schuett

  • Jr. Member
  • **
  • Posts: 97
  • Karma: +0/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #190 on: August 16, 2020, 08:42:20 am »
OK... no traps but no sound on my T60 (Analog devices HDA) - will need to investigate...  no traps and perfect sound on my X250 (Realtek HDA)

Hi Paul, works on my X61 Thinkpad, sound is great. Still have the problem that the 2 buttons to control volume do not work, the button to mute volume works. Thanks again for your efforts

CardInfo.card: 0
CardInfo.id: Intel
CardInfo.Driver: HDA-Intel
CardInfo.Name: HDA Intel
CardInfo.LongName: HDA Intel at 0xf8220000 irq 17
CardInfo.MixerName: Analog Devices AD1984
CardInfo.Components: HDA:11d41984,17aa20d6,00100400

Paul Smedley

  • Hero Member
  • *****
  • Posts: 2092
  • Karma: +159/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #191 on: August 16, 2020, 11:10:46 am »
Well, I'm pleased to say that I just broke through a psychological barrier and built the code based on linux kernel 4.0.9

Build is at http://smedley.id.au/tmp/uniaud32-linux-4.0.9-20200816.zip

The linux 4.0 kernel was released in April 2015, and 4.0.9 was released in July 2015.

Next step will be 4.1.52 - from a brief look - this one looks a bit more complex - there's been some code restructuring :/

Cheers,

Paul

David McKenna

  • Hero Member
  • *****
  • Posts: 742
  • Karma: +24/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #192 on: August 16, 2020, 03:51:45 pm »
 Hi Paul,

  I was hoping to try out my new trap dump partition, but no such luck... both the 3.18 and 4.0 versions posted work fine here. Congratulations on moving into the 4.x versions... and thanks again!

Regards,

Eugene Tucker

  • Sr. Member
  • ****
  • Posts: 368
  • Karma: +12/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #193 on: August 16, 2020, 04:39:40 pm »
Working on my Dell laptop! And well I might add.
 

Pete

  • Hero Member
  • *****
  • Posts: 1281
  • Karma: +9/-0
    • View Profile
Re: Updated Uniaud32 build
« Reply #194 on: August 17, 2020, 02:12:04 am »
Hi Paul

uniaud32-linux-3.16.85-20200814.zip (Release) works fine.

uniaud32-linux-4.0.9-20200816.zip (Release) causes system hang at boot when the startup sound should play.

Card info for adapter 0:
  num: 0
  id: SB
  driver: HDA-Intel
  name: HDA ATI SB
  longname: HDA ATI SB at 0xfeb00000 irq 16
  mixer: Realtek ALC892
  componenets: HDA:10ec0892,104384fb,00100302


Regards

Pete