OS/2, eCS & ArcaOS - Technical > Hardware

USB Scanners and ArcaOS

<< < (11/15) > >>

Wim Brul:
Hi Andreas,

Perhaps How I installed SANE and TAME for the first time on my ArcaOS system. I used a two step approach. helps you in getting your CanoScan LiDE 210 scanner working.

The sane-find-scanner.exe (size 81.044) works and shows:found USB scanner (vendor=0x04a9 [Canon], product=0x190a [CanoScan], chip=GL124) at libusb:001:005

Speaking about backends. The scanimage.exe that works (size 4.817.128) has the sane scanner specific backends linked in.

Wim

Martin Iturbide:

--- Quote from: Pete on January 09, 2021, 05:46:30 pm ---Looking through your debugoutput.txt file it looks as though sane/scanimage does not have support for the epson scanner as both epsonds and espon2 sections show a list of pci ids which those backends support and 0x04b8/0x1135 is not listed.

You could try adding the pci ids to the epsonds and epson2 .conf files # USB section eg epson2.conf:-

# epson2.conf

--- End quote ---

Thanks Pete. I just did that with epson2.conf following your advice.

What should I do now to test the scanner?

I'm attaching the new "scanimage -v 1>output.pnm 2>debugoutput.txt"

Regards

Pete:
Hi Martin

Looking through your latest debugoutput.txt it seems the scanner is recognised and opened, see line 1729, but something goes wrong after that.

Does the scanner also have wireless connectivity? - If "Yes" turn that off while trying to setup usb.

You probably need Paul or Sylvan to look through the debug file as there is more chance of them spotting a problem.


Regards

Pete

Lars:

--- Quote from: Wim Brul on January 09, 2021, 05:58:25 pm ---Hi Andreas,

Perhaps How I installed SANE and TAME for the first time on my ArcaOS system. I used a two step approach. helps you in getting your CanoScan LiDE 210 scanner working.

The sane-find-scanner.exe (size 81.044) works and shows:found USB scanner (vendor=0x04a9 [Canon], product=0x190a [CanoScan], chip=GL124) at libusb:001:005

Speaking about backends. The scanimage.exe that works (size 4.817.128) has the sane scanner specific backends linked in.

Wim

--- End quote ---
Hi Wim,
I assume you are using an up to date version of USBCALLS.DLL and USBRESMG.SYS, correct?
That at least would confirm that we do not need to rework either one.

Wim Brul:

--- Quote from: Lars on January 09, 2021, 10:08:21 pm ---Hi Wim,
I assume you are using an up to date version of USBCALLS.DLL and USBRESMG.SYS, correct?
That at least would confirm that we do not need to rework either one.

--- End quote ---
Yes Lars, that is correct. No rework required.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version