Author Topic: AVxCAT (v2 into test)  (Read 6252 times)

Remy

  • Hero Member
  • *****
  • Posts: 597
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #15 on: February 07, 2023, 11:19:14 pm »
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos

Thanks Roberto, I'll check what's happening

Remy

  • Hero Member
  • *****
  • Posts: 597
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #16 on: February 08, 2023, 01:58:38 am »
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos

Hi Roberto,

Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

Link refreshed (get the file again if already downloaded)

wpi updated too..
« Last Edit: February 08, 2023, 11:31:30 pm by Remy »

roberto

  • Hero Member
  • *****
  • Posts: 781
  • Karma: +3/-3
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #17 on: February 08, 2023, 03:57:34 pm »
Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip
Thank you, it's ok.
saludos

Andy Willis

  • Sr. Member
  • ****
  • Posts: 279
  • Karma: +6/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #18 on: February 17, 2023, 05:28:04 am »
I found a problem in the voix that I built that is currently packaged with AVxCAT, I fixed and rebuilt it.

P.S.
Martin, I only just noticed the OS2World github of voix, I had made updates to it several years ago to be able to be used in AVxCAT, these are at:
https://github.com/abwillis/voix
if you are interested in pulling in the changes.
« Last Edit: February 17, 2023, 05:49:21 am by Andy Willis »

Mentore

  • Full Member
  • ***
  • Posts: 119
  • Karma: +4/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #19 on: February 17, 2023, 08:15:20 am »
IIRC the first port of Voix was mine. I'm glad to see that someone improved it.
Thanks Andy.

Mentore

Remy

  • Hero Member
  • *****
  • Posts: 597
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #20 on: February 17, 2023, 08:35:18 pm »
I found a problem in the voix that I built that is currently packaged with AVxCAT, I fixed and rebuilt it.

P.S.
Martin, I only just noticed the OS2World github of voix, I had made updates to it several years ago to be able to be used in AVxCAT, these are at:
https://github.com/abwillis/voix
if you are interested in pulling in the changes.

Thanks Andy  ;)

I updated both links (zip and wpi) with updated AVxCAT
PDF updated too.

For WPS into local codepage, rexxuni required
« Last Edit: February 19, 2023, 06:10:09 pm by Remy »

Martin Iturbide

  • OS2World NewsMaster
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4180
  • Karma: +39/-1
  • Your Friend Wil Declares...
    • View Profile
    • Martin's Personal Blog
Re: AVxCAT (v2 into test)
« Reply #21 on: February 18, 2023, 02:32:12 am »
P.S.
Martin, I only just noticed the OS2World github of voix, I had made updates to it several years ago to be able to be used in AVxCAT, these are at:
https://github.com/abwillis/voix
if you are interested in pulling in the changes.

Thanks Andy, it is done. Not sure if I did it in the most elegant way, but I have your changes here: https://github.com/OS2World/MM-SOUND-Voix

Regards
« Last Edit: February 18, 2023, 02:33:51 pm by Martin Iturbide »
Martin Iturbide
OS2World NewsMaster
... just share the dream.

Andy Willis

  • Sr. Member
  • ****
  • Posts: 279
  • Karma: +6/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #22 on: February 18, 2023, 05:07:43 am »
IIRC the first port of Voix was mine. I'm glad to see that someone improved it.
Thanks Andy.

Mentore

It was my understanding that you initially ported it... to which end, I had added the credit in the readme.md file when I setup the repository. I merely added the ability for stdin/stdout support so that AVxCAT could pipe in and out.

mauro

  • Sr. Member
  • ****
  • Posts: 375
  • Karma: +3/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #23 on: February 26, 2023, 07:23:55 pm »
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos


Hi Roberto,

Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

Link refreshed (get the file again if already downloaded)

wpi updated too..

Hi Remy, I had the old avxcat 1.5.4.1 on my Virtualbox vm, warp 4.52 guest, well running.
After read the post about the latest v2 wpi package, I downloaded and replaced the previous version, and after that also placed the new avxcat.EXE (in C:\APPS\AVXCAT\) as described to correct the initial issue occourred to Roberto.
But no luck, it gives error warnings both in the initial installation and in the new executable running.
First appears an auto-scrolling drRex window -see avxcat 2 err 1.jpg image- getting to over line 22000 and then desappearing.
After that appears the system error message, see avxcat 2 err 2.jpg image.
Can you catch a cause for the issue by my indications or maybe there's a log I can retrive to be more specific?
Thank you

« Last Edit: February 27, 2023, 06:57:11 am by mauro »

Remy

  • Hero Member
  • *****
  • Posts: 597
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #24 on: February 27, 2023, 02:13:19 pm »
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos


Hi Roberto,

Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

Link refreshed (get the file again if already downloaded)

wpi updated too..

Hi Remy, I had the old avxcat 1.5.4.1 on my Virtualbox vm, warp 4.52 guest, well running.
After read the post about the latest v2 wpi package, I downloaded and replaced the previous version, and after that also placed the new avxcat.EXE (in C:\APPS\AVXCAT\) as described to correct the initial issue occourred to Roberto.
But no luck, it gives error warnings both in the initial installation and in the new executable running.
First appears an auto-scrolling drRex window -see avxcat 2 err 1.jpg image- getting to over line 22000 and then desappearing.
After that appears the system error message, see avxcat 2 err 2.jpg image.
Can you catch a cause for the issue by my indications or maybe there's a log I can retrive to be more specific?
Thank you

Hi!

From the drrexx dialog, it looks that an initial call (I suppose to a loaded proc from dll) couldn't be satisfied and then, you've got all lines displaied into this dialog.
Do you have the new dll provided by AVxCAT v2 or did ou left the older one ?     
At which date did you download the package ?
Please, get the package again, no need to install the other zip file package (same level)
As well, what is the bldlevel of AVxCAT.exe ?

Thanks
Remy

mauro

  • Sr. Member
  • ****
  • Posts: 375
  • Karma: +3/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #25 on: February 27, 2023, 06:57:00 pm »

Hi!

From the drrexx dialog, it looks that an initial call (I suppose to a loaded proc from dll) couldn't be satisfied and then, you've got all lines displaied into this dialog.
Do you have the new dll provided by AVxCAT v2 or did ou left the older one ?     
At which date did you download the package ?
Please, get the package again, no need to install the other zip file package (same level)
As well, what is the bldlevel of AVxCAT.exe ?

Thanks
Remy

Thanks for replying Remy. To begin again from a clean situation, I deinstalled the 1.5.4.1 version by WarpIn uninstaller routine.
Then I installed the wpi package
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_1.wpi
You said no need to add-replace anything behind this, and it already gives the described issue when try to run it first time.
"Do you have the new dll provided by AVxCAT v2 or did ou left the older one " means I should separately provide-modify something after such installation? Maybe that could be the point.
As said previously, later this I also tried to copy both the avxcat_rep.zip content first, and then avxcat_new.zip content in the avxcat working directory (overwriting the same name files), each time attempting to run it again with no changes.

Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.1#@##1## 17 Feb 2023 19:36:20     ARCAOS-000
::::0.1::00017@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.1
Date/Time:       17 Feb 2023 19:36:20
Build Machine:   ARCAOS-000
FixPak Version:  00017
File Version:    2.0
Description:     GA build'
« Last Edit: February 27, 2023, 07:00:26 pm by mauro »

Remy

  • Hero Member
  • *****
  • Posts: 597
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #26 on: February 28, 2023, 10:14:20 am »

Hi!

From the drrexx dialog, it looks that an initial call (I suppose to a loaded proc from dll) couldn't be satisfied and then, you've got all lines displaied into this dialog.
Do you have the new dll provided by AVxCAT v2 or did ou left the older one ?     
At which date did you download the package ?
Please, get the package again, no need to install the other zip file package (same level)
As well, what is the bldlevel of AVxCAT.exe ?

Thanks
Remy

Thanks for replying Remy. To begin again from a clean situation, I deinstalled the 1.5.4.1 version by WarpIn uninstaller routine.
Then I installed the wpi package
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_1.wpi
You said no need to add-replace anything behind this, and it already gives the described issue when try to run it first time.
"Do you have the new dll provided by AVxCAT v2 or did ou left the older one " means I should separately provide-modify something after such installation? Maybe that could be the point.
As said previously, later this I also tried to copy both the avxcat_rep.zip content first, and then avxcat_new.zip content in the avxcat working directory (overwriting the same name files), each time attempting to run it again with no changes.

Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.1#@##1## 17 Feb 2023 19:36:20     ARCAOS-000
::::0.1::00017@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.1
Date/Time:       17 Feb 2023 19:36:20
Build Machine:   ARCAOS-000
FixPak Version:  00017
File Version:    2.0
Description:     GA build'

Latest build is installed.
May I suggest you following action please:
Rename AVxCAT.ini file from under C:\OS2 if you have it there (it should remain from V1) to AVxCAT.in_ and than, start AVxCAT again. If it works than redo the customization and send me your AVxCAT.in_ (older ini file) using my web site email link.
Regards

Updt: What is your screen size ?  (>= 1024x768 mini)
« Last Edit: February 28, 2023, 04:05:12 pm by Remy »

mauro

  • Sr. Member
  • ****
  • Posts: 375
  • Karma: +3/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #27 on: February 28, 2023, 05:30:22 pm »



Latest build is installed.
May I suggest you following action please:
Rename AVxCAT.ini file from under C:\OS2 if you have it there (it should remain from V1) to AVxCAT.in_ and than, start AVxCAT again. If it works than redo the customization and send me your AVxCAT.in_ (older ini file) using my web site email link.
Regards

renamed AVXCAT.INI as indicated, no better change obtained, the further attempt to start the program just failed with same error described before.
After that, no other AVXCAT.INI has been created in the system. Anyway I posted the file attached to your email but am receiving back a notification of non-valid email address. Should I post it here?

Quote
Updt: What is your screen size ?  (>= 1024x768 mini)


1152 x 660 . It's a Virtualbox guest session window resized to fit inside my host window
« Last Edit: February 28, 2023, 05:34:32 pm by mauro »

Remy

  • Hero Member
  • *****
  • Posts: 597
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #28 on: February 28, 2023, 08:34:20 pm »



Latest build is installed.
May I suggest you following action please:
Rename AVxCAT.ini file from under C:\OS2 if you have it there (it should remain from V1) to AVxCAT.in_ and than, start AVxCAT again. If it works than redo the customization and send me your AVxCAT.in_ (older ini file) using my web site email link.
Regards

renamed AVXCAT.INI as indicated, no better change obtained, the further attempt to start the program just failed with same error described before.
After that, no other AVXCAT.INI has been created in the system. Anyway I posted the file attached to your email but am receiving back a notification of non-valid email address. Should I post it here?

Quote
Updt: What is your screen size ?  (>= 1024x768 mini)


1152 x 660 . It's a Virtualbox guest session window resized to fit inside my host window


What is this screen format ? Shouldn't it be 1152 x 864 ?
About my email address, please add a dot betweenn r and d

This isn't in the required screen size value but should work.
I just forced the screen size of virtualbox to your specification and than, I installed AVxCAT from the wpi and it well start ! not crash.

I found your problem, it is with rxutilex.dll, you don't have it into your libpath.
Your system is warp 4.5.2 (it differs from AN or eCS.
Please add the rxutilex.dll from under AVxCAT\Dlls and put it into a libpath and then, reboot you OS/2.
It should start

I'm going to check why it produces this error while it should not and add a correction and than update this post as soon it is corrected for this rxutilex.dll not loaded issue

Regards
Rémy

Remy

  • Hero Member
  • *****
  • Posts: 597
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #29 on: March 01, 2023, 07:20:40 pm »
Hi mauro !

It should be resolved yet (no more need to add the dll into your libpath)
You can rename your saved avxcat.in_ to *.ini  (if not done yet, of course)
Install new WPI package only.
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_3.wpi

Regards
Rémy