OS/2, eCS & ArcaOS - Technical > Networking

NAT Network & Host-Only Network

<< < (3/3)

ppgrainbow:

--- Quote from: Pete on May 07, 2023, 07:24:05 am ---Hi

This old post may be of help   https://www.os2world.com/forum/index.php?topic=2339.0


Regards

Pete

--- End quote ---
Thanks for the link, but I don't think that it covers more than one network adapter.
Somehow, something might be causing the OS/2 Peer to not function correctly when it is connected as the Host-Only Ethernet Adapter on lan1. NAT Networking on lan0 does work though.

Tom:

--- Quote from: Pete on May 05, 2023, 07:00:20 pm ---Hi ppgrainbow

I seem to recall something about having to set Windows NT4/2000 networking to use a particular setting in order for OS/2 <-> Windows peer networking to work. I'm struggling to remember the exact setting ... something like Use LanMan with a value of 1... Sorry, must be around 20+ years ago.

Maybe that will jog someone elses memory and they will post the exact setting.

--- End quote ---

Do you mean "lanman auth=" and "NTLMv2 auth=" ?
(as mentioned in this post: https://www.os2world.com/forum/index.php/topic,1691.msg16524.html#msg16524)

Alex Taylor:
Here's another old article that I found very useful way back in the day: https://ardent-tool.com/network/sea.html

One WAG: possibly the virtual networking is interfering with TCPBEUI broadcast mode? You might try the article's suggestion to configure Hybrid mode (section 3.1.1).

Pete:
Hi Tom


--- Quote from: Tom on May 07, 2023, 03:32:01 pm ---
--- Quote from: Pete on May 05, 2023, 07:00:20 pm ---Hi ppgrainbow

I seem to recall something about having to set Windows NT4/2000 networking to use a particular setting in order for OS/2 <-> Windows peer networking to work. I'm struggling to remember the exact setting ... something like Use LanMan with a value of 1... Sorry, must be around 20+ years ago.

Maybe that will jog someone elses memory and they will post the exact setting.

--- End quote ---

Do you mean "lanman auth=" and "NTLMv2 auth=" ?
(as mentioned in this post: https://www.os2world.com/forum/index.php/topic,1691.msg16524.html#msg16524)

--- End quote ---


Looks like what I was trying to remember.


Regards

Pete

ppgrainbow:

--- Quote from: Alex Taylor on May 07, 2023, 05:56:06 pm ---Here's another old article that I found very useful way back in the day: https://ardent-tool.com/network/sea.html

One WAG: possibly the virtual networking is interfering with TCPBEUI broadcast mode? You might try the article's suggestion to configure Hybrid mode (section 3.1.1).

--- End quote ---
I'll try the Hybrid mode configuration found in section 3.1.1 and I'll get back to you when I can. ^^
If it does work, I'll post a updated screenshot. :)

Navigation

[0] Message Index

[*] Previous page

Go to full version