Author Topic: Boot from USB stick  (Read 5078 times)

OS4User

  • Sr. Member
  • ****
  • Posts: 406
  • Karma: +10/-0
    • View Profile
Boot from USB stick
« on: May 19, 2023, 01:37:51 pm »
Boot from USB stick is not difficult now.

How to:
  1)  choose a letter for your boot USB stick - better use unused (for ex. F:);
  2)  create Compatibility Volume, Primary Partition on your USB stick with chosen letter;
       (it could be complicated but it is another matter)
  3)  format  F:  /fs:hpfs   or  format  F:  /fs:jfs   (both working fine)
  4)  sysinstx F:
  5)  you may need to create fresh installation  on HDD F: (I don't know another way how to change a disk letter in all settings, say, from C:  to  F:)
  6) copy everything from HDD F: (change letter for it before copying)  to your USB stick F:
  7) now you can boot from USB stick

!!!!  Once you have chosen and set letter for USB stick -  never change it  -  the letter is stored in a few places and not all programs change it properly.

This way I created  stick  to boot to command prompt  but one friend of mine made a full functional system (boots till desktop).

Prerequisites:
   - USB drivers from Lars Erdmann (at least usbdrv249); Lars, thank you very much for your drivers with this amazing ability.
   - OS/4 kernel (at least 6217).

Feedback is welcome.

Martin Iturbide

  • OS2World NewsMaster
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4992
  • Karma: +44/-1
  • Your Friend Wil Declares...
    • View Profile
    • Martin's Personal Blog
Re: Boot from USB stick
« Reply #1 on: May 19, 2023, 02:29:40 pm »
Hi  OS4User
  6) copy everything from HDD F: (change letter for it before copying)  to your USB stick F:

What do you recommend for copying all from the HDD to the stick? A simple copy command or some other copying tool?

Regards
Martin Iturbide
OS2World NewsMaster
... just share the dream.

OS4User

  • Sr. Member
  • ****
  • Posts: 406
  • Karma: +10/-0
    • View Profile
Re: Boot from USB stick
« Reply #2 on: May 19, 2023, 04:20:42 pm »
What do you recommend for copying all from the HDD to the stick? A simple copy command or some other copying tool?

I used FC/2 because it is the most convenient tool for me to work with files.

Dave Yeo

  • Hero Member
  • *****
  • Posts: 5033
  • Karma: +114/-1
    • View Profile
Re: Boot from USB stick
« Reply #3 on: May 19, 2023, 05:49:10 pm »
I always used to use xcopy,
Code: [Select]
xcopy /h /o /t /s /e /r /v X:\* Y: