Author Topic: AVxCAT (v2 into test)  (Read 25763 times)

mauro

  • Sr. Member
  • ****
  • Posts: 410
  • Karma: +3/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #30 on: March 01, 2023, 08:09:14 pm »
Hi mauro !

It should be resolved yet (no more need to add the dll into your libpath)
You can rename your saved avxcat.in_ to *.ini  (if not done yet, of course)
Install new WPI package only.
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_3.wpi

Regards
Rémy
Ok deinstalled previous and installed this one, also placed AVXCAT.INI in its original position. Now I've a DrRexx window error message as shown in the image, it is just a short text advice, no lines running-scrolling as before, ad then the specific 3175 system error warning after closing the DrRexx alert.

For what related to the screen format, I can select in the System Setup -see image- and that resolution selection has been specifically created by my need applying the VirtualBox Manager commandline to set a non-standard resolution, possible after the OS2 Virtualbox Guest Additions
« Last Edit: March 01, 2023, 08:51:23 pm by mauro »

Remy

  • Hero Member
  • *****
  • Posts: 646
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #31 on: March 02, 2023, 02:52:07 pm »
Ok,

Most issue you have are due missing required dlls.
The problem is that RXFUNCQUERY() returns 1 if function isn't registered and 0 if it is.
If a new rxfuncquery is done after an add it returns 0 (if or if no dll available) and when the dll isn't present, the dllfunction call fail !

To be more verbose about missing dlls and not crash:
I updated AVxCAT and added a check into libpath + avxcat\dll path (this one is installed by package 2) and issue a message telling which required dlls are missing to start AVxCAT followed by an exit. I updated information about loaded dll and dll path into the Extra logs view. (menu view).

Package 2 from WPI updated too.

I just refreshed the 2.0.0.3 wpi link with the updates (02.03.2023)
Please, get the refreshed link

Regards
Rémy

mauro

  • Sr. Member
  • ****
  • Posts: 410
  • Karma: +3/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #32 on: March 02, 2023, 08:51:38 pm »
Ok,

Most issue you have are due missing required dlls.
The problem is that RXFUNCQUERY() returns 1 if function isn't registered and 0 if it is.
If a new rxfuncquery is done after an add it returns 0 (if or if no dll available) and when the dll isn't present, the dllfunction call fail !

To be more verbose about missing dlls and not crash:
I updated AVxCAT and added a check into libpath + avxcat\dll path (this one is installed by package 2) and issue a message telling which required dlls are missing to start AVxCAT followed by an exit. I updated information about loaded dll and dll path into the Extra logs view. (menu view).

Package 2 from WPI updated too.

I just refreshed the 2.0.0.3 wpi link with the updates (02.03.2023)
Please, get the refreshed link

Regards
Rémy

it runs now!
Thank you for your assistance

TeLLie

  • Full Member
  • ***
  • Posts: 233
  • Karma: +11/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #33 on: March 02, 2023, 09:38:55 pm »
Hi Remi

I dont get it to start here.
I run the latest wpi, as it mention i had some dll messing, but after install them i had no complains.
But when starting it i only see error sin drrexx dialog, i cannot read them even not copy them as its going to fast to see :(

I only see this in popup.log

03-02-2023  21:29:57  SYS3175  PID 0062  TID 0002  Slot 00ad
H:\PROGRAMS\AVXCAT\AVXCAT.EXE
c0000005
00005f6b
P1=00000001  P2=00005f6b  P3=XXXXXXXX  P4=XXXXXXXX
EAX=00000000  EBX=00000000  ECX=00060078  EDX=015d3d50
ESI=00000000  EDI=00000000
DS=0053  DSACC=d0f3  DSLIM=bfffffff
ES=0053  ESACC=d0f3  ESLIM=bfffffff
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=005b:00005f6b  CSACC=d0df  CSLIM=bfffffff
SS:ESP=0053:015d3fd0  SSACC=d0f3  SSLIM=bfffffff
EBP=726f773b  FLG=00010246

H:\Programs\AVXCAT>bldlevel avxcat.EXE
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.3#@##1## 2 Mar 2023 14:32:41      ARCAOS-000::::0.3::00001@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.3
Date/Time:       2 Mar 2023 14:32:41
Build Machine:   ARCAOS-000
FixPak Version:  00001
File Version:    2.0
Description:     GA build'


Remy

  • Hero Member
  • *****
  • Posts: 646
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #34 on: March 02, 2023, 11:13:27 pm »
Hi TeLLie,

The package you downloaded was just before the refresh !
The correct bldlevel:
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.3#@##1## 2 Mar 2023 18:14:32      ARCAOS-000
::::0.3::00003@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.3
Date/Time:       2 Mar 2023 18:14:32
Build Machine:   ARCAOS-000
FixPak Version:  00003
File Version:    2.0
Description:     GA build'

 ***********************

"I run the latest wpi, as it mention i had some dll messing, but after install them i had no complains.
But when starting it i only see error sin drrexx dialog"

You wrote not having complains after installing dlls.
Did you install package 2 ?
If no complain, i suppose avxcat was up or no and just drrexx window?

Can you please install package 2
(you shouldn't have complain about missing dlls if this one was installed with avxcat)

What's your OS (os/2, eComstation or ArcaOS)

Regards,
Remy

Please run from a command line:
avxcat --debug98

Please use my email link on my website and add a "dot" between "r" and "d" into the userid 

« Last Edit: March 03, 2023, 11:53:08 am by Remy »

Remy

  • Hero Member
  • *****
  • Posts: 646
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #35 on: March 03, 2023, 12:07:58 pm »
The correction about dlls was introduced with fixpack 00003
.
I review my code and find a possible (in a very specific case) crash during conversion.
I corrected this, updated a few comments into extra logs view dialog and removed a older left trace entry.
I just refreshed the same wpi package at this time.

bldlevel is now:
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.3#@##1## 3 Mar 2023 11:55:05      ARCAOS-000
::::0.3::00004@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.3
Date/Time:       3 Mar 2023 11:55:05
Build Machine:   ARCAOS-000
FixPak Version:  00004
File Version:    2.0
Description:     GA build'

Please TeLLie, get the refreshed V2.0.0.3 WPI and tell me how it works now for you.
Thanks

Regards
Rémy

note: fixpack 00005   
« Last Edit: March 03, 2023, 04:48:23 pm by Remy »

TeLLie

  • Full Member
  • ***
  • Posts: 233
  • Karma: +11/-0
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #36 on: March 03, 2023, 08:13:23 pm »
Hi Remy

I installed the latest wpi and now all is working...

Thankz for this nice piece of OS2 software :)

Kind regards, TeLLie

I use Arcanoae ...

Remy

  • Hero Member
  • *****
  • Posts: 646
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #37 on: March 07, 2023, 06:47:49 pm »
For current V2 ->  now V2.0.0.4
A few corrections ( e.g.  regression on metadatas when grabbing CD code introduced on 25 feb 2023)   

avxcat_rep.zip (for the V2  exe replacement only)
https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

AVXCAT_S-2_0_0_4.wpi
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_4.wpi

Remy

  • Hero Member
  • *****
  • Posts: 646
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #38 on: March 15, 2023, 10:24:30 am »
https://remydodin.levillage.org/en/realisations.php?item=6900&id=realisations

(Official GA on 2.0.0.4 including new pdf revision file)

Remy

  • Hero Member
  • *****
  • Posts: 646
  • Karma: +9/-1
    • View Profile
Re: AVxCAT (v2 into test)
« Reply #39 on: August 28, 2023, 02:05:27 am »
A fix was issued on AVxCAT 2.0.1.1 (fp1) - crash with vebcam

A zip preview AVxCAT V2.1.0 is available for test (must be installed above AVxCAT V2.0.1.x)
(please use write to author link from AVxCAT since I had to disable email link from my website due to bad contacts)

2.1.0.0  [ in test mode, available at request ] - new fix 11 (30082023)
         - New option to use Icon buttons for predefined profiles instead of dropdown list
         - Selected iconbutton profile is saved at AVxCAT file/exit
         - Possibility to customize iconbutton profile (use of external cfg file)
         - Added [X] "delete" option for user created profiles under [New profile] button
         - Added "Create folder(s)" & "delete folder" under internal filemanager called by [Chg] button for target folder
         - Added "M4A" alac
         - Added "MOV"
         - Added MD5 package used to autocheck downloaded updates (through AVxCAT menu)
         - New ffmpegca.dll
         - Optimized parameters when involving leech (USB CD-ROM, grabbing private CDs)
         - corrected: a wrong video profile
         - corrected: some video option may use incorrect video extension
         - corrected: hung could occure when cdd2wav reads a track having lot of jitter (changed a fixed parameter)
         - Somme minor corrections
         - changed a few webcam -> UDP initial settings
         - fix of webcam bug included

note: same location as wpi download but named "AVxCAT210-prev.zip"

info: window during webcam add (into main process list).
         To change some fields setting, click on updt (have webcam on), modify itsoffset to syncronize audio/video if needed
         ffplay checkbox is used with ffplay (ctrl) size used to display the stream video (only) to control recording or streaming.
         screenshots from v2.1.0

         Last screenshot is about downloaded update MD5 checksum error (I forced an error to get the message issued else no message)
   

 
« Last Edit: August 30, 2023, 12:42:14 am by Remy »