OS/2, eCS & ArcaOS - Technical > Hardware
Touch Screen and Pen support on ArcaOS 5.1.0
Martin Iturbide:
Hello
Now that I was able to install ArcaOS 5.1.0 two machines with touch screen support, I want to see if by any chance I can get support with Wim's drivers.
My first try is with the "Lenovo Miix 510-12ISK". Since it is dual boot, I had tested with Windows 10 that it has a working touch screen and the Lenovo Thinkpad Active Pen.
I had generated it's PCI hardware report and USB report, but I can find which is the Hardware ID I should include on USBECD. I'm attaching the devices that I see on Windows 10, but the hardwareID is not a regular one. I can only see is a Wacom device.
My plan is to start with Wim's "Thinkpad Yoga12" package, since it' the more brand related.
I want to add:
DEVICE=C:\OS2\BOOT\XSMOUSE.SYS
DEVICE=C:\OS2\BOOT\AMOUSE.SYS STYPE=XSMOUSE$
DEVICE=C:\OS2\BOOT\USBECD.SYS /D:????:????:???? /N:$FINGER$ /S /V
DEVICE=C:\OS2\BOOT\USBECD.SYS /D:????:????:???? /N:$STYLUS$ /S /V
RUN=C:\OS2\BOOT\YOGA12.EXE
But I need to fill up the ????
Regards
Joop:
See this page
https://home.hccnet.nl/w.m.brul/penguide/index.html#LenovoThinkPadUSB
Martin Iturbide:
--- Quote from: Joop on September 10, 2023, 11:17:49 pm ---See this page
https://home.hccnet.nl/w.m.brul/penguide/index.html#LenovoThinkPadUSB
--- End quote ---
Thanks Joop
I'm reading the page, and I'm leaning to think that my Wacom device on the Lenovo Miix is a COM Device, since I can not find it on pci.exe or lsusb.
According to what I'm reading I need to use "ACPITREE", but I can not find it. I saw an old Alex Taylor post (2014) where he was not able to find ACPITREE, but he found the IRQ looking in Windows, but I don't get where to find that info.
Regards
Dave Yeo:
Have you tried rmview? rmview /irq should show the interrupts, rmview /io the ports, rmview /? for help.
Martin Iturbide:
Thanks Dave
I used rmview /irq and /io, but I don't understand how to map that data to the PSCOM.SYS driver. (I guess I need to use that PSCOM.SYS)
This is the sample of the site:
DEVICE=O:\OS2\BOOT\PSCOM.SYS (1,200,4,I)
(COM1 to access the Wacom Pen at port=200 and irq=4)
But don't know which device is the correct one from the list and how to get those values.
Regards
Navigation
[0] Message Index
[#] Next page
Go to full version