OS/2, eCS & ArcaOS - Technical > Hardware

Driver for network card X1PCIEXP1 or intel

(1/1)

roberto:
Hello,
 I have bought a PC, HP, on the motherboard it mounts this network card:
------------------------------------------------
 Bus 0 (PCI Express), Device Number 25, Device Function 0
 Vendor 8086h Intel Corporation
 Device 153Ah Ethernet Connection I217-LM
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 8027103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : F7C00000h
 Address 1 is a Memory Address (0-4GiB) : F7C3D000h
 Address 2 is an I/O Port : F080h
 System IRQ 20, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   Unknown Capability (Code 13h)!!
----------------------------------------

I can't find a driver for it.
What card is compatible with any free pciexprex port in Arcaos 508?

Saludos

Roderick Klein:
Check the Arca Noae wiki.

https://www.arcanoae.com/wiki/multimac/
You need the E1000B driver.
Your chipset ID matches with that driver.

Roderick

roberto:
Everything is perfect, I changed the hard drive, the E1000B network driver, and it is working.
Saludos

Navigation

[0] Message Index