Author Topic: WSeB Server parts on ARcaOS 5.1 with installed Samba - what to deinstall?  (Read 4057 times)

Sigurd Fastenrath

  • Hero Member
  • *****
  • Posts: 613
  • Karma: +31/-0
  • OS/2 Versus Hardware - Maximum Warp!
    • View Profile
I want to install the WSeB Server parts on Top of ArcaOS 5.1, as I did several times before, using the great tool of Alex Taylor.

Unfortunately I missed the point to NOT install Samba/Network parts during the initial ArcaOS Installation. So I do get an error code (I think it is something like X1604, do not have it around yet) when trying to install the WSeB parts.


As I do not want to reinstall everything from scratch (it is a bit of a special installation, what would lead to a lot of work), what components do I have to deinstall, and how, to get the Server Tool from Alex to let it do what it is supposed to do?

Thank you very much for hints!

I will attach a screenshot of the error code in a few hours.

EDIT: added Screenshot
« Last Edit: October 24, 2024, 08:06:48 pm by Sigurd Fastenrath »

Steven Levine

  • Newbie
  • *
  • Posts: 48
  • Karma: +10/-0
    • View Profile
You need to track down the log files generated by the install so that you can figure out exactly what install step failed.

The 0x1604 error code is from CID and means that something failed somewhere and do not reboot.  As you have noticed, it's not telling you what failed.

I typically sort the log files in date descending order and find the file that reports what actually failed.

Sigurd Fastenrath

  • Hero Member
  • *****
  • Posts: 613
  • Karma: +31/-0
  • OS/2 Versus Hardware - Maximum Warp!
    • View Profile
Hi Steven,

thank you very much for looking into this!

This is what POPUPLOG.OS2 shows:

10-25-2024  20:28:18  SYS3175  PID 0059  TID 0002  Slot 00a7
C:\IBMLAN\INSTALL\IBMLAN\INSTALL\LANINST.PGM
c0000005
0007abf7
P1=00000008  P2=00004f34  P3=XXXXXXXX  P4=XXXXXXXX 
EAX=00000005  EBX=0000004e  ECX=0000000c  EDX=e3980000
ESI=00b90000  EDI=00370000 
DS=0000  DSACC=****  DSLIM=******** 
ES=05c7  ESACC=00f3  ESLIM=00003fff 
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=003f:0000abf7  CSACC=00fb  CSLIM=0000dd83
SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff
EBP=00b9504f  FLG=00010212

LANINST.PGM 0006:0000abf7


Is it of any help?

Thanks again!!

EDIT;

Searching for SYS3175OS/2 leads me to this homepage:

https://www.ibm.com/support/pages/os2-warp-server-40-sys3175-installation-error-and-multiple-cd-rom-drives-servers

It refers to multiple CDROM Drives, if I understand correctly. But I do not have more than one, and this is usb.
I will try to disable USB CDROM Support and try it again.


EDIT II:
Same error, no difference

« Last Edit: October 25, 2024, 08:42:57 pm by Sigurd Fastenrath »

Roderick Klein

  • Hero Member
  • *****
  • Posts: 697
  • Karma: +14/-0
    • View Profile
Hi Steven,

thank you very much for looking into this!

This is what POPUPLOG.OS2 shows:

10-25-2024  20:28:18  SYS3175  PID 0059  TID 0002  Slot 00a7
C:\IBMLAN\INSTALL\IBMLAN\INSTALL\LANINST.PGM
c0000005
0007abf7
P1=00000008  P2=00004f34  P3=XXXXXXXX  P4=XXXXXXXX 
EAX=00000005  EBX=0000004e  ECX=0000000c  EDX=e3980000
ESI=00b90000  EDI=00370000 
DS=0000  DSACC=****  DSLIM=******** 
ES=05c7  ESACC=00f3  ESLIM=00003fff 
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=003f:0000abf7  CSACC=00fb  CSLIM=0000dd83
SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff
EBP=00b9504f  FLG=00010212

LANINST.PGM 0006:0000abf7


Is it of any help?

Thanks again!!

EDIT;

Searching for SYS3175OS/2 leads me to this homepage:

https://www.ibm.com/support/pages/os2-warp-server-40-sys3175-installation-error-and-multiple-cd-rom-drives-servers

It refers to multiple CDROM Drives, if I understand correctly. But I do not have more than one, and this is usb.
I will try to disable USB CDROM Support and try it again.


EDIT II
Same error, no difference

Question are you installing under Virtualbox ? Or is this on bare metal ?

Roderick

Sigurd Fastenrath

  • Hero Member
  • *****
  • Posts: 613
  • Karma: +31/-0
  • OS/2 Versus Hardware - Maximum Warp!
    • View Profile
Bar Metall, Asus ROG Zephyrus G14 3024

David McKenna

  • Hero Member
  • *****
  • Posts: 813
  • Karma: +25/-0
    • View Profile
 Hi Sigurd,

  This is a total shot in the dark: do you have the 'STUBFSD.IFS ISOFS' line in CONFIG.SYS? If so try disabling that. Maybe disable UDF.IFS too, reboot then retry.

Regards,

Roderick Klein

  • Hero Member
  • *****
  • Posts: 697
  • Karma: +14/-0
    • View Profile
Hi Sigurd,

  This is a total shot in the dark: do you have the 'STUBFSD.IFS ISOFS' line in CONFIG.SYS? If so try disabling that. Maybe disable UDF.IFS too, reboot then retry.

Regards,

Thats not the cause! The issue is this PGM file is ran by the PEER installer. Alex his installer calls the PEER installer and then the peer installer calls this PGM file.
I asked if this ran in Virtualbox as I have sometimes seen the peer installer crash because of this reason.

Sigurd try running the system with /MAXCPU=1 behind ACPI.PSD and see if this is an SMP issue. Normally this installer is ran with a single CPU core switched on.
Try this and let us know what then happens.

Roderick

Sigurd Fastenrath

  • Hero Member
  • *****
  • Posts: 613
  • Karma: +31/-0
  • OS/2 Versus Hardware - Maximum Warp!
    • View Profile
Thank you Roderick and David, but none of the tipps helped. The same POPUPLOG.OS2 as before.

Doug Clark

  • Sr. Member
  • ****
  • Posts: 349
  • Karma: +11/-1
    • View Profile
Sigurd,

One more shot in the dark.  Try temporarily removing

E:\usr\local\lib;E:\usr\lib

where E:\ is your UNIXROOT
from your CONFIG.SYS before you run the install. 

I think I remember there is a conflict in one of the DLLs or executables in the unix stuff with something in the IBM networking stuff.  If that is the case this might explain why it worked before and this time, when you have the samba stuff already installed, it fails.

Checking my WSeB over AOS 5.1 install (which has Samba installed but it was installed after WSeB) I see that I have the USR\LIB and USR\LOCAL\LIB after all the networking stuff in LIBPATH.

Sigurd Fastenrath

  • Hero Member
  • *****
  • Posts: 613
  • Karma: +31/-0
  • OS/2 Versus Hardware - Maximum Warp!
    • View Profile
Thanks Doug,

but unfortunately no change.

I think, I will start from scratch once I have time for it.

Thanks to all!


Roderick Klein

  • Hero Member
  • *****
  • Posts: 697
  • Karma: +14/-0
    • View Profile
Re: WSeB Server parts on ARcaOS 5.1 with installed Samba - what to deinstall?
« Reply #10 on: October 27, 2024, 06:41:43 pm »
Thank you Roderick and David, but none of the tipps helped. The same POPUPLOG.OS2 as before.

What logs are in \var\log ? Do a dir /od.

Roderick

Steven Levine

  • Newbie
  • *
  • Posts: 48
  • Karma: +10/-0
    • View Profile
Re: WSeB Server parts on ARcaOS 5.1 with installed Samba - what to deinstall?
« Reply #11 on: October 28, 2024, 08:45:30 am »
Sigurd,

This

  SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff

indicates we failed with stack overflow.  Of course, this does not tell us why.  We need to see to logs to get some idea of what the installer was doing at the time of the exception.

Lars

  • Hero Member
  • *****
  • Posts: 1367
  • Karma: +70/-0
    • View Profile
Re: WSeB Server parts on ARcaOS 5.1 with installed Samba - what to deinstall?
« Reply #12 on: October 28, 2024, 12:33:55 pm »
Sigurd,

This

  SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff

indicates we failed with stack overflow.  Of course, this does not tell us why.  We need to see to logs to get some idea of what the installer was doing at the time of the exception.

Hi Steve,

can you briefly explain why ? The segment is not an expand down segment so the offset (3732) should always be <= lim (3fff) which it is.

To me the error more looks like 5c7:4f34 (ES:"value of P2") has been attempted to access (DS is 0 which seems odd ...). And 4f34 certainly exceeds 3fff.

By the way: do you know what P1=00000008 (XCPT_SPACE_ACCESS) is supposed to mean ? I could not find any info about that.
« Last Edit: October 28, 2024, 12:44:15 pm by Lars »

Sigurd Fastenrath

  • Hero Member
  • *****
  • Posts: 613
  • Karma: +31/-0
  • OS/2 Versus Hardware - Maximum Warp!
    • View Profile
Re: WSeB Server parts on ARcaOS 5.1 with installed Samba - what to deinstall?
« Reply #13 on: October 28, 2024, 07:11:52 pm »
Sigurd,

This

  SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff

indicates we failed with stack overflow.  Of course, this does not tell us why.  We need to see to logs to get some idea of what the installer was doing at the time of the exception.

Hi Steven,

attached are the only two log files related to lan server stuff, I was able to find.

There are no Server related logs in \var.

Thank you very much,

Sigurd
« Last Edit: October 28, 2024, 09:59:36 pm by Sigurd Fastenrath »

Roderick Klein

  • Hero Member
  • *****
  • Posts: 697
  • Karma: +14/-0
    • View Profile
Re: WSeB Server parts on ARcaOS 5.1 with installed Samba - what to deinstall?
« Reply #14 on: October 29, 2024, 01:45:16 pm »
Sigurd,

This

  SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff

indicates we failed with stack overflow.  Of course, this does not tell us why.  We need to see to logs to get some idea of what the installer was doing at the time of the exception.

Hi Steven,

attached are the only two log files related to lan server stuff, I was able to find.

There are no Server related logs in \var.

Thank you very much,

Sigurd

At this point I would say I do not think there is anything else we can really do. Unless Steve has questions. For some unknown reasom that PGM file crashes. But the root cause is not known.
Did you test it on another system Sigurd ?

Roderick