OS/2, eCS & ArcaOS - Technical > Hardware

Soundblaster Live 1024 drivers

(1/3) > >>

Jochen Schäfer:
I'm building a test rig on base of a AM3 board. OS/2 is running fine.

Now, I want to use a sound card. I have access to a Sound Blaster Live 1024 (CT4830) card, so I installed that one.
I downloaded some driver from the Hobbes archive, but it doesn't work. Does someone have some suggestions, how to make the card work, or which driver I should use.
Also, I have a Terratec DMX Xfire 1024. Is there an drivers for that?
Or wóuld a USB sound card a better option?

Lars:
What I can say is that the USB audio drivers naturally support a very broad range of devices and support many more sample rates than the devices actually support in HW because they do under/oversampling in SW (right in the driver). The later was necessary to support DART as far as possible. On the other hand they obviously occupy a USB port for the device.

Paul Smedley:
looks like the emu10k1 driver in uniaud should support the ct4830 chipset
cs46xx driver in uniaud looks like it might support the Terratec

Jochen Schäfer:
I wanted to avoid UNIAUD, because I have big problems with my development machine.
I don't know, if it the driver or the HW in my T480, but I wanted to try "native" drivers.

Lars:
forgot: USB isochronous data transfer (that is: audio and video data streaming) might not properly work with USB 3.0.
That is at least the latest status that I know of.

Navigation

[0] Message Index

[#] Next page

Go to full version