Author Topic: [Uniaud] No sound even if audio card is recognized  (Read 24844 times)

xynixme

  • Guest
Re: [Uniaud] No sound even if audio card is recognized
« Reply #15 on: June 23, 2017, 01:04:54 am »
Almost no sound, this time (eCS 1.2, SoundMax, desktop). The hardware should be fine. With W7 the sound is fine. A <Alt-F1>restore didn't help. Cold and warm reboots don't help. The master volume (and all (?) other ones) seems to be 100%, but it sounds like far less than 10%. It's almost mute. AFAICT it happened quite suddenly, without an obvious reason. There was no intentional change of any multimedia component. What's probably wrong?

Ian Manners

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 463
  • Karma: +10/-0
  • I am the computer, it is me.
    • View Profile
    • ComKal Networks Australia
Re: [Uniaud] No sound even if audio card is recognized
« Reply #16 on: June 23, 2017, 05:58:12 am »
What do the lines  starting with PARMSTRING= under the various headings in x:\mmos2\mmpm2.ini say?

ie,
PARMSTRING=BALANCE=50,VOL=80,INPUT=LINE,OUTPUT=SPEAKER
PARMSTRING=BALANCE=50,VOL=80,INPUT=LINE,GAIN=70,OUTPUT=SPEAKER

etc
ensure the VOL= is set to something rational, especially if you have GAIN.

PS, boot in maintence mode or from another source to make changes to mmpm2.ini
« Last Edit: June 23, 2017, 06:00:33 am by Ian Manners »
Cheers
Ian B Manners

xynixme

  • Guest
Re: [Uniaud] No sound even if audio card is recognized
« Reply #17 on: June 23, 2017, 10:01:40 pm »
At the moment the system is mute, so no system sounds at all (monitor volume 100%, the "expected" bad result was being able to hear something). I'll even consider a reinstall, albeit that's hard without a working CD drive.

The setting below is the only string which matched the search string "VOL=".

[ICHAMPMIX01]
 VERSIONNUMBER=3.1.8
 PRODUCTINFO=SoundMax Integrated Digital Wave Audio
 MCDDRIVER=AMPMXMCD
 VSDDRIVER=AUDIOIF
 PDDNAME=ADISND1$
 MCDTABLE=MDM
 RESOURCENAME=ICHAmpMixer01
 DEVICEFLAG=2
 DEVICETYPE=9
 SHARETYPE=3
 RESOURCEUNITS=2
 RESOURCECLASSES=2,1,1
 VALIDCOMBINATIONS=1,2,2,1
 CONNECTORS=5,4,,0,9,,0,8,,0,10,,0,7,,0
 PARMSTRING=BALANCE=50,VOL=100,INPUT=MIC,GAIN=50,OUTPUT=SPEAKER

xynixme

  • Guest
Re: [Uniaud] No sound even if audio card is recognized
« Reply #18 on: June 24, 2017, 12:28:15 am »
"Solved": last time W7 still produced normal sounds, but now it doesn't anymore. Probably a hardware problem.