Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Pete2

Pages: [1] 2
1
Comments, Suggestions & Questions / Re: SIO2K Ray Gwinn
« on: February 23, 2021, 01:54:35 pm »
I was at one time a registered SIO2k user but had to revert to com.sys for reasons I can't remember any more(!) The attached file is a zip of the directory created by the installation. To install, unpack it where you want it to be and follow the instructions for manual installation in install.txt - basically just adding config.sys entries. I've tested this and the drivers seem to load ok, but I couldn't test with any hardware attached to the COM port.

2
Programming / Re: ODBC VX-Rexx/DBExpert
« on: November 22, 2020, 11:57:28 pm »
Is Ko Myung-Hun's build of libtool any help? (My build environment hasn't worked for several years so I'm well off the pace here.)

3
Applications / Re: Installing win16 applications
« on: October 21, 2020, 05:03:33 pm »
Openssh: see http://www.altsan.org/os2/utils/ This requires security/2 and some other stuff. Or use ANPM if possible to make sure you pick up all prerequisites.

4
General Discussion / Re: Thunderbird e-mail client
« on: August 27, 2020, 11:08:39 pm »
Hi Renee. I haven't yet found any alternative to turning on 'access for less secure apps' in google settings. I've also changed Thunderbird's security setting to (IIRC) password, securely transmitted. Google doesn't like this, but so far the sky hasn't fallen on my head.

5
Setup & Installation / Re: Installing Warp 3 issues
« on: May 16, 2020, 03:11:36 pm »
You can unpack .dsk images with diunpack or dskxtrct (which IIRC does more checking.) Both can be found on Hobbes.

6
General Discussion / Re: Yahoo Groups End of Life
« on: November 07, 2019, 08:20:57 pm »
Quote
There's a program called wget you can use to download website content from Linux / Unix.  I created a default Ubuntu OS in VirtualBox, went to the terminal, typed a few commands and retrieved website content locally.

You can find wget for OS/2 on (e.g.) Hobbes.  :)

7
Applications / Re: Using a scanner with hplip?
« on: April 19, 2019, 07:09:21 pm »
Hi Pete. I think you should be able to use hpaio.

I have a HP deskjet 2510 usb all-in-one. On  eCS 2.2b2 I've got the 'old' type standard CUPS installation in the root of the boot drive. I'm using hpaio 3.15.11 with hplip 3.15.11, both installed in the root of the boot drive. With this setup printing doesn't work, but following Paul's instructions I have scanning working. I've set SANE_DEFAULT_DEVICE to the value obtained by hp-mkuri, so if I type in (e.g.)

scanimage --resolution 300 >foo.jpg

it works as intended. I'm not sure how to make things work in Tame - IIRC you must add a key to scanner.dat, which can be done with an INI file editor - but I don't know what values to use, or how one is supposed to determine them.

On ArcaOS I installed CUPS via anpm into my usr tree, which isn't on the boot drive, and created a printer using Alex Taylor's printer manager. Printing worked fine (until the last upgrade, when it mysteriously stopped working.)  I'm using the same hpaio and have hplip in the root of the boot drive, but if I run hp-mkuri or scanimage - not a sausage. But YMMV.

I hope this helps a bit - and if anyone has any idea why scanimage &co won't start, any suggestions would be welcome.

8
I've found WPSdump ( http://hobbes.nmsu.edu/download/pub/os2/util/wps/wpsdump-0.1.zip ) quite useful. It can save and restore  a single folder as well as the whole desktop, and has the option to skip replacement of objects which already exist on the new desktop.

Pete

9
Applications / Re: Help! Need to fix yum.
« on: July 12, 2016, 03:00:30 pm »
  Check your system and make sure there is not another version of NSPR4K.DLL on your LIBPATH that would confuse YUM.

...by doing
which -la nspr4k.dll

You can find  'which' at http://hobbes.nmsu.edu/download/pub/os2/util/disk/which215.zip
Other versions exist but not all of them can search for libraries.

hth
Pete


10
Internet / Re: Firefox 38 problem
« on: May 06, 2016, 04:14:24 pm »
Hello John. Nice to hear from you again. Have you checked that you have all the required dependencies? PMdll ( http://hobbes.nmsu.edu/download/pub/os2/util/system/pmdll-2.12.zip) is a good tool for this.

11
Setup & Installation / Re: Problem installing eCups 2.1
« on: April 21, 2016, 01:31:32 pm »
Me again. I uninstalled the WarpIn  cups base, filters and HPLIP packages, then reinstalled from the zip files, leaving the wizard, port and ecups-HP driver in place. I created a printer using the wizard. Test print from the web interface worked on second attempt, and I can print ok from OpenOffice. Make of that what you will.

Pete

12
Setup & Installation / Re: Problem installing eCups 2.1
« on: April 01, 2016, 12:16:07 am »
Hi Pete. Since my last post I've deleted all and re-installed, and this time the wizard was able to create a printer object with no problems. So that problem was probably something left around from 2.03, and it just needed a thorough enough uninstall. Now I can't print the test page - I'm getting  'not a pdf file' or 'unrecognized file type' errors. I've set log level to debug2 and  part of the log file is attached.

Thanks
Pete

13
Setup & Installation / Re: Problem installing eCups 2.1
« on: March 29, 2016, 09:54:54 pm »
Hello! I'm also having problems installing eCUPS 2.1 . I installed the base, HP-LIP, ecups_HP driver and wizard packages, and replaced cups20.dll in ecs\dll with the new version. I used the wizard to try to create a printer (I like the fact that the HP deskjet 2510 is now listed) but it failed. Relevant part of the log is attached - I think the problem occurs where it says 'broken pipe'. I'm not sure what to try to fix this.

14
Hi Paul. I'm using your latest build. I don't know whether there are any compatibility issues with hplip 3.15.11. Changing 3.13.3 to 3.15.11 in hplip.conf doesn't help.

15
I have a dekjet 2510 all-in-one; CUPS is now working for this (cups 2.0.3 + cups filters 1.0.71+ hplip 3.15.11)
 hp-mkuri -b 1 -d 1 produces
hp:/usb/Deskjet_2510_series?serial=CN35P37JHK05QX
hpaio:/usb/Deskjet_2510_series?serial=CN35P37JHK05QX

Nothing seems to happen in response to
scanimage -d hpaio:/usb/Deskjet_2510_series?serial=CN35P37JHK05QX >output.pnm
Has to be killed with ctrl-C.

Output of scanimage -v -d hpaio:/usb/Deskjet_2510_series?serial=CN35P37JHK05QX 1>output.pnm 2>debugoutput.txt is
[sanei_debug] Setting debug level of hpaio to 255.
[hpaio] sane_hpaio_init(): scan/sane/hpaio.c 294
[hpaio] sane_hpaio_open(/usb/Deskjet_2510_series?serial=CN35P37JHK05QX): scan/sane/hpaio.c 328 scan_type=7 scansrc=1

Any thoughts on this?

Thanks
Pete

Pages: [1] 2