Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - ivan

Pages: [1] 2 3 ... 5
1
Hardware / cloning
« on: November 25, 2024, 05:14:39 pm »
My question is simple but I assume the answer won't be.  I had friends over and they 'accidentally' messed up my ArcaOS install, so much I had to reformat the boot partition.  I have another computer upstairs that is a copy of the messed up one, now how do I transfer that system to the messed up one?

2
Setup & Installation / cloning OS/2
« on: October 14, 2024, 08:14:04 pm »
One of my computers died on me and I would like to clone my work computer to the new one - yes I have backups of all the data but not the OS or the customisation.  So it boils down to recreating what I had when I built that computer over 10 years ago - is it possible?

3
General Discussion / RPM to WarpIn
« on: October 12, 2024, 01:37:15 am »
Martin,

I may be an old fogy but I don't see any real use for your "warpsnap" idea unless you have a very small screen (about the size 10 inch tablet).  My 30 inch (2560x1600) monitor has enough space without trying to be smart.

What I would like to see is the return of WARPIN as the main way of installing software rather than trying to use yum to convert OS/2 to Linux

4
Internet / firefox question
« on: September 26, 2024, 03:23:28 pm »
This question comes from running out of disk space for the mozprofile directory.
Digging through the files I found a cache2 dir which has a sub dir entries which had several thousand files in it.  I deleted that subdir and got the disk space back.  The problem is it keeps on being created and I don't see a way of killing its reproduction.

Why is it created and how does one get rid of it permanently?

5
Applications / XWP Problem - Shut down
« on: July 03, 2024, 09:14:16 pm »
I have just updated xwp 1.0.16 on one of my computers and found a problem or I'm missing something.

All my earlier installs of xwp  actually shut down the computers when I use the extended shut down - 1.0.16 closes the OS but does NOT actually shut the computer down which is what I expect.  Am I doing something wrong or have I missed some setting?

6
Applications / Panorama Maximum Resolution
« on: December 20, 2023, 12:28:59 am »
While we are on this topic I have a question.  What is the maximum resolution that can be displayed by panorama?  At the moment I am running 1920 x 1200 on a 28 inch monitor.  I would like to go to 2560 x 1600 on a 30 inch monitor.  Is that possible?

7
Utilities / hardware information
« on: August 08, 2023, 11:19:31 pm »
Do we have a program that gives ALL the hardware information especially the make and model of the motherboard?  I am looking for something like the windows Speccy program (see attachment taken from my win data logger box).  Hardware explorer does most things but for some reason does not give the motherboard info.

8
Networking / Changing subnet on network
« on: May 23, 2023, 10:29:12 am »
I have a problem. 
I have just moved to fibre from my internet supplier which is great but the the DHCP server in the freebox is set for 192.168.1.xxx and my old network is/was set for 192.168.0.xxx.  The change over on my Linux boxes was simple, just fill out a new profile and I was back on air - not so simple for OS/2 or ArcaOS. I spent a couple of hours tracking down every instance where the old subnet was mentioned and physically changing the refference.

Now the question, is there a simple way to do this change over on OS/2 and ArcaOS?  If so please let me in on the secret.

9
Hardware / getting ArcaOS to remember video resolution
« on: May 04, 2023, 05:08:22 am »
Is it possible to get ArcaOS to remember video resolution if it is started without the monitor connected?

I have three computers connected to a Samsung S24E659 monitor (1920x1200) via a HDMI KVM switch.  I had to replace my old KVM switch (don't ask but it involved the cat and the dog) that used to auto sense any of the computers being switched on.  The new switch does not do that but the linux computers remember the resolution and not the ArcaOS one, it reverts to 800x600 which means I need to reset it to 1920x1200, reboot and then rearrange the screen icons back to where I have them normally which is a pain, hence my asking this question.
I wouldn't mind if it switched to 1920x1080, that I could live with.

10
Setup & Installation / ArcaOS 5.1
« on: April 12, 2023, 11:53:16 pm »
Why would I want ArcaOS 5.1 if the 5.07 version I have does all that I want - it even runs on my Ryzen third generation processor and motherboard.

It would have to have some impressive improvements to make me want to change and if so what are they?

Change my mind.

11
I have a need for a very small portable computer that will run ArcaOS.  I saw this at a friend's place but he is running windows rubbish and won't change so I thought I'd ask for the forum members views.

12
Hardware / panorama not remembering monotor resolution
« on: December 01, 2022, 08:11:49 pm »
I have a very annoying problem.  If I boot the computer without the monitor being on panorama reverts to something like 640 x 480 which is stupid on my 1920 x 1200 28 inch monitor. 
Is there a way to make panorama remember the monitor resolution?  I have no problems like this with Linux on the same monitor via a kvm switch.

13
Storage / HPFS and JFS
« on: November 20, 2022, 09:38:31 pm »
A friend asked me a question to which I don't have an answer and I was wondering if anyone here could help me.

Why do we use JPS formatted partitions when is anything goes wrong there is no way of recovering that partition?  With HPFS we might lose the odd file but not the whole partition.  My experience is that you had better have a full up to date backup and hope for the best with a JFS partition.

14
General Discussion / I have a problem
« on: July 18, 2022, 08:02:42 pm »
My problem should be simple to solve but it isn't.

Some information, I have a data logger that I access once a month and it is causing the problem.  The software for the data logger is windows only and I have a dedicated windows 7 computer for it.  What I want to do is add another hard disk to my Ryzen third gen processor based ArcaOS computer and scrap the win 7 box.

The problem is what do I use to dual boot the Ryzen box, especially then Air-boot only causes an error message on any of my 1920x1200 monitors? The error shown is a moving box saying 'incorrect video resolution', so there is no way I can select the win7 install.

Any thoughts would be most helpful.

15
Setup & Installation / Quick question about boot manager
« on: January 07, 2022, 09:02:19 pm »
I want to setup a replacement computer system with multiple operating systems on it.

I have learned that the boot manager that comes with ArcaOS is useless on any of my AMD Ryzen based systems - it does not display any of the menus so it is impossible to select an OS.

Before I start this project I would like to know if anyone is using the old OS/2 boot manager in such a situation.  I know the primary partition limitations and since I only want three operating systems on this new system (Boot Manager, OS/2(ArcaOS), Linux Mint and Win7).  There will be several hard disks - the number will depend on how well the system will work.

The reason for this is because I am fedup with having 5 or more computers running at the same time all feeding into a KVM switch and two monitors, also on a HHDMI switch.

Any information and comments?  Thanks in advance.

Pages: [1] 2 3 ... 5