Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - David McKenna

Pages: 1 ... 29 30 [31] 32 33 ... 51
451
Multimedia / Re: Updated Uniaud32 build
« on: January 03, 2021, 07:28:40 pm »
 Paul,

  The 0103-debug version seems to work well on my laptop, but the mixer is identified as 'IDT 92HD81B1X5'. With the 'official' AOS version of UniAud, it is identified as 'Intel 2806'. Not sure if this even matters, or maybe they are the same thing? Get more controls with PMUnimix and 0103 too. Alsahlp$ attached...

Regards,

452
Multimedia / Re: Updated Uniaud32 build
« on: January 03, 2021, 12:03:56 am »
 Hi Paul,

 This 0103 version works perfectly on my desktop machine (HDA: ALC887-VD): boots, proper sound, 9 controls in PMUnimix, no hesitations, appears in the hardware manager. I'll keep using this one and let you know if anything comes up - thanks again! Hope to soon see your bust in the OS/2 hall of fame!

Regards,

453
Multimedia / Re: Updated Uniaud32 build
« on: January 02, 2021, 06:35:35 pm »
 Hi Paul,

  Like you say, 5.4.86-20210102 works identically to 0101b-debug here: boots, proper sound, 9 controls in PMUnimix, but hesitates before playing system sounds.

Regards,

454
Multimedia / Re: Updated Uniaud32 build
« on: January 01, 2021, 09:40:30 pm »
 Hi Paul,

  That was with the release version - what I typically try first. Just tried the debug version and that one works perfectly - 9 controls in PMUnimix, no hesitations, and shows up in the hardware manager.

  Guess i didn't try it then because of the flurry of releases at that time. I'll try to be more rigorous about testing in future. Thanks for your Olympian efforts at modernizing UniAud! Alsahlp$ attached...

455
Multimedia / Re: Updated Uniaud32 build
« on: January 01, 2021, 07:03:41 pm »
 Hi roberto,

 I captured that unimix -card with the original version before applying Paul's new version. Wanted to make sure to show the correct info. Sorry to be confusing...

Regards,

456
Multimedia / Re: Updated Uniaud32 build
« on: January 01, 2021, 04:56:30 pm »
 Gave the 5.4 0101b version a try on my laptop:

Command line mixer for UNIAUD32. Version 1.1
Detected UNIAUD version 2.02.06
Detected 1 audio adapter(s)
Card info for adapter 0:
  num: 0
  id: PCH
  driver: HDA-Intel
  name: HDA Intel PCH
  longname: HDA Intel PCH at 0xd4730000 irq 22
  mixer: Intel ID 2806
  componenets: HDA:111d7605,103c17b7,00100107 HDA:11c11040,103c3066,00100200 HDA:80862806,80860101,00100000

  Get a TrapE in UNIAUD32 with the release version (no dump partition on this), but the debug version seems to work correctly. Only thing is the card does not appear in the hardware manager, and there is an error in alsahlp$... attached.

Regards,

457
Multimedia / Re: Updated Uniaud32 build
« on: January 01, 2021, 03:13:04 pm »
 Paul,

 A very mixed bag with the 5.4 versions:

0101 release - boots, no sound, only 3 controls in PMUnimix, hesitations where system sounds would occur
0101 debug - boots, loud sound, only 4 controls in PMUnimix, hesitations before system sounds occur
0101b release - TrapE in UNIAUD32, I uploaded a dump to dropbox
0101b debug - boots, proper sound, PMUnimix shows 9 controls, hesitations before system sounds occur

 Tried these all both warm and cold boot and they were consistent. I'll attach alsahlp$ logs for the 3 that booted (all taken immediately after booting to desktop).

Regards,

458
Multimedia / Re: Updated Uniaud32 build
« on: December 31, 2020, 10:57:37 pm »
 Happy New Year, Paul!

 7 more hours to go here...

 Version 5.3.18 boots, both release and debug versions. Debug has sound, but very loud. Release has no sound. Both only show 3 controls in PMUnimix. Also can't get a complete ALSAHLP$ log - maybe it wraps? (every time, I try immediately after the desktop appears). Example attached...

Regards,

459
Multimedia / Re: Updated Uniaud32 build
« on: December 31, 2020, 03:21:57 pm »
 Happy New Year!

 All 3 of the 5.x versions could boot, but 5.1 gave a TrapE 1 time (couldn't get it to repeat, but have the dump if you want it). No sound most of the time with any of them, except 1 time 5.2 booted with loud sound and system sounds occurring late. In every case PMUnimix showed only 3 controls.

Regards,

460
Multimedia / Re: Updated Uniaud32 build
« on: December 31, 2020, 12:32:40 am »
 Paul,

  Attached are various 4.19 debug version serial logs. All booted with sound except 1229 (boots, no sound) and 1230d (Trap E). This is somewhat different from the release versions...

Regards,

461
Multimedia / Re: Updated Uniaud32 build
« on: December 30, 2020, 01:08:16 pm »
 Paul!

  1230c works great - sound is normal, no hesitations, and PMUnimix shows all 9 controls as before (one boot only).

  1230d gives a Trap E in UNIAUD32.

 Gotta head to work right now, but I'll provide those serial logs when I get back later today...

Regards,

462
Multimedia / Re: Updated Uniaud32 build
« on: December 29, 2020, 11:40:56 pm »
 Paul,

  Got a TrapE with 1230 too... trap dump uploaded to dropbox. Maybe these problems are specific to Realtek chips...

Regards,

463
Multimedia / Re: Updated Uniaud32 build
« on: December 29, 2020, 10:32:10 pm »
 Paul,

  Version 4.19.163-20201229 also boots with a TrapE in UNIAUD32 here. I sent you the trap dump for that one too...

Regards,

464
Multimedia / Re: Updated Uniaud32 build
« on: December 29, 2020, 12:27:07 pm »
 Paul,

 Just tried the 1229b version of 4.19 and I get a TrapE in UNIAUD32 at boot. Also uploaded a trap dump into Dropbox. Let me know if I should also try the previous 1229 version...

Regards,

465
Multimedia / Re: Updated Uniaud32 build
« on: December 28, 2020, 12:20:10 pm »
 OK, got it... where to send?

Pages: 1 ... 29 30 [31] 32 33 ... 51