Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Remy

Pages: 1 2 [3] 4 5 ... 34
31
Hardware / Re: WebCam Driver Question
« on: March 21, 2022, 12:16:33 am »
using pipe video only:
webcam /d09DA:2695:0100/n/i1  !

32
Applications / Re: AVxCAT (v2 into test)
« on: March 10, 2022, 09:29:44 pm »
Hi Remy

I must apologize.  I found what I did wrong.  I failed to copy the files over the previous install which had used Warpin.  Once I did that, everything appears to work great.   There were more files I required that were not included with the previous install. Thanks for all you hard work..

David

Hi David,
GA will be Warpin.

Thanks for your update
Rémy

33
Applications / Re: AVxCAT (v2 into test)
« on: March 09, 2022, 11:14:53 pm »
I downloaded file without a problem.

I execute the .exe  and the first pic shows what happens.  This has happen with earlier versions.  I just stopped it and ran the .exe again and it would work.  Not this time..

I get the second message and then nothing happens.

This code is executed during initial installation without ini file and after opening parameters + clic on webc checkbox
The messages are from webc dialog (but it could be displaied if an error occured before - making me modify a/)

I checked under my system but didn't get the error after removing my ini file and starting a fresh install.
I checked the code and changed 2 lines
a/ one which could set an invalid option if a specified path doesn't exist (cdda2wav)
B/ I forgot to refresh a var under webc dialog centering the dialog (corrected to refresh this var as it should be)
  If this var got dropped, a crash could occur (had this under an other dialog in an older version)   

Can you please get the update and give it a try ? thanks
(same file name)

Regards
Rémy


34
Applications / Re: AVxCAT (v2 into test)
« on: March 09, 2022, 10:03:51 pm »
I downloaded file without a problem.

I execute the .exe  and the first pic shows what happens.  This has happen with earlier versions.  I just stopped it and ran the .exe again and it would work.  Not this time..

I get the second message and then nothing happens.

Thanks,
verifying and let you know

35
Off Topic discussions / Re: Russia attacked Ukraine
« on: March 09, 2022, 01:21:40 pm »

36
Applications / Re: AVxCAT (v2 into test)
« on: March 08, 2022, 09:15:38 pm »
To stream webcam audio+video network using udp...
Once you added the webcam, add the udp: information on the target path and then start.... (use parm ?pkt_size=1316 to have it working with VLC)
 

37
Bonjour to all,

This message to inform you that PMMail, among other mail clients, can't access "outlook.office365.com" via POP/SMTP protocols (via Stunnel) anymore, due to the activation of two-factor authentication.
This will soon be the case for the access to GMail.com starting May 30th.

This marks  the end of using of PMMail for me. And this will force me to use the web mail of the providers :-\ and not on OS/2  :'(

I still have to find an alternative to ETeller and I'll probably phase out my old OS/2 (eCS) machine.

Have a nice day you all!
--
Guillaume GAY

Salut Guillaume,

It works for me using the new authentification process but it wasn't well at first try.
I had to have Firefox up before trying thunderbird auth if I well remember...

Coucou à Vincent
@+
Rémy

38
Applications / Re: AVxCAT (v2 into test)
« on: March 07, 2022, 11:56:58 pm »
Hi,

AVxCAT v2 has progressed
Many planned updates and new functions are now available (only 3 to 4 new options/changes aren't fully enabled yet)
I need more feedbacks about (not finalized) current beta. (ini file is maintained compatible with older release despite new entries are added)

Regards
Remy
   

Hello Remy,
I tried to download it but got a strange error. The downloaded file was only 3 kB long.

Don't know if  I made a mistake and tried to download something else but still.

Mentore

Hi,
Strange, the file  AVXCAT_new.zip  is near 344KB
what's your small downloaded file name ?

( https works too - https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_new.zip )
 
How did you download it (from AVxCAT menu or using previous direct link) ?
- If from the menu, which Curl build do you have ?
- It uses two step, 1/ get information of available build on my site & 2/ if newer, download it ...
  do you have a home path (set home=) ?     

Regards
Rémy

39
Applications / Re: AVxCAT (v2 into test)
« on: March 07, 2022, 04:02:50 am »
Hi,
I updated the build, having found a tipo under icecast process
Those having downloaded it can use the get updated function under help.

A few screenshots of new functions using "dark" thema
(some datas masked)

001 - new entries into popup menu
002 - play webcam after adding its link into the container
003 - Add icecast m3u link or ... into container
004 - rec-cast (rec-time record is set under parameter menu options)
005 - show description of a grabbed CD (example used as a test for illustration)
006 - get Album art (front cover) for discid.cddb (*.cddb must be added into file filter to allow adding this type file - file contain not checked)   

40
Applications / AVxCAT (v2 into test)
« on: March 03, 2022, 11:42:22 pm »
Hi,

AVxCAT v2 has progressed
Many planned updates and new functions are now available (only 3 to 4 new options/changes aren't fully enabled yet)
I need more feedbacks about (not finalized) current beta. (ini file is maintained compatible with older release despite new entries are added)

To not overwrite current AVxCAT, this one is named avxcat_beta (dll is updated and backward compatible) 
The AVxCAT guide isn't updated yet and will be done next but I've added a long list about major functions and minor changes as well all corrected bugs including some rare crashes some had in specific situation...

To go to this beta level, have AVxCAT installed.
Check having new requirements installed
Use FFMPEG > v4 (I used V4.2.2 for my tests) to enabled all new functions
- Recording ice cast or other... (e.g. icecast-yp.internet-radio (dot) com ; directory.shoutcast (dot) com ...)
   Record time can be adjusted (Stream limit [time] options under parameters)
- You can record webcam (webcam.exe required - You can start webcan with option from under AVxCAT and up to 2 webcams devices selectable)
   you have the option to enable ffplay at link add into AVxCAT which provides you a small video window about current webcam recording
   an option to send udp webcam output available too...
   https://www.os2world.com/cms/index.php/past-news/80-news/software/23231-uvc-webcam-server-1-0
- You can start webcam and just see the video from it
   You ca start/stop playing some type of "files"
- CD grabbing with cddb improved with autoget front cover id enabled (webc under parameters)
   CD grab output organisation can be selected through the [ + ] available button under parameters
   CD HQ extract (including n recoveries in case of read errors) option added
   ...
- Audio muxing or append (in muxing mode, first entry can be volume lowered)
...

To test it and provide feedbacks:
http://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_new.zip

Regards
Remy
     

41
Setup & Installation / Re: ArcaOS, VirtualBox, and mouse freezes
« on: February 27, 2022, 04:19:46 pm »
My issue seems have a connection between network interface and usb interfaces...
My investigation is now under my power supply which seems having more drop down power than expected (as well as ripple) increased during high internet activities, providing unpredictable results... (I'll try to upgrade my desktop power supply or change capacitors into the one I have! - several years old now)

42
Setup & Installation / Re: ArcaOS, VirtualBox, and mouse freezes
« on: February 19, 2022, 08:56:25 pm »
Hi All

No idea why Bennie has a mouse problem in VBox but suspect it is a VBox issue.

I think if I was Remy I would uninstall USB3 drivers and install either the latest AN or Lars USB2  drivers to check if the problem goes away.


Regards

Pete

ArcaOs has the latest AN USB driver.
My USB dongle is connected on an USB only connecter (Something to try,removing USB3 driver)  ::) 

43
Setup & Installation / Re: ArcaOS, VirtualBox, and mouse freezes
« on: February 18, 2022, 08:34:10 pm »
Remy,
Do you mean the keyboard keeps working when the mouse freeze occurs, or the keyboard also freezes when the mouse freezes?
Bennie

As I wrote, I bought a new keyboard and mouse due nothing worked during freeze  (this is why I suspect possible driver conflict)

44
Setup & Installation / Re: ArcaOS, VirtualBox, and mouse freezes
« on: February 17, 2022, 09:17:49 pm »
Remy,
It certainly could be a conflict with some background process like a widget. When the mouse freezes, is the rest of the system working? Can you use the keyboard, for example? If so, can you run Top to see what activity shows up in the list?
Bennie

My keyboard works with my mouse on the same usb unify dongle.

Here you have the answer

45
Setup & Installation / Re: ArcaOS, VirtualBox, and mouse freezes
« on: February 17, 2022, 12:00:15 am »
Have you tried unplugging the dongle and plugging it back in?

Of couse, one of the first thing to try..

Pages: 1 2 [3] 4 5 ... 34