Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Remy

Pages: 1 ... 35 36 [37] 38 39 40
541
Applications / Re: Share your ArcaOS screenshots
« on: May 18, 2017, 10:51:25 am »
Before posting screenshots, it should well work... Up to now, I didn't find how to enable SMP mode to have at least 2 CPUs !!!
( This was very easy to enable under eCS )

Ok, well ???

Post the solution & screenshot, smh !

I guess you did not to try to install the System so far?

 >:(   Of course I installed it but as I wrote, SMP is not working making it unusable for me.
As soon SMP could be enabled, I'll post screenshots...

I guest that those having posted screenshots are unable to run SMP mode ! right ?

542
Applications / Re: ArcaOS - How to enable SMP
« on: May 18, 2017, 01:24:49 am »
If you did a sucessful install you should only need to bring up the CPU Moniter in Programs-Utilities and turn the processors you want to use on.

No good idea. ( only one CPU listed )

Install was successfull but SMP mode is not enabled !   ( only one CPU is on - SMP kernel not installed ! )
Under selective install there is no option to install SMP ( the readme tells that it should be an option but there is none ) ...
No where I could find a tool or interface to allow SMP installation and make me use all BIOS available processor available !

( I already lost a full day to find where it is and could not find it... )   >:(



543
Applications / ArcaOS - How to enable SMP
« on: May 18, 2017, 12:30:14 am »
Anyone knows how to enable SMP mode ?
( selective install has no feature for SMP nor did I found an SMP install option and I bougth ArcaOS to use it in SMP mode ! )

544
Applications / Re: Share your ArcaOS screenshots
« on: May 17, 2017, 10:30:51 pm »
Before posting screenshots, it should well work... Up to now, I didn't find how to enable SMP mode to have at least 2 CPUs !!!
( This was very easy to enable under eCS )

545
Applications / Re: ArcaOS 5.0 on VirtualBox
« on: May 17, 2017, 10:26:24 pm »
How to enable SMP mode ?
 

546
Setup & Installation / Re: NIFS for Intel NICS
« on: April 27, 2016, 11:54:04 pm »
Hum!
Current sold intel NICS only has USB3, no USB2 How do you plan to make these USB3 working ?
There is no OS/2 USB3 driver yet. 

547
Hi,

Check what you have in your libpath ( config.sys )
If you have a \usr\lib at beginning of the libpath=, you can use it to simplify future product installation ...
   

548
Setup & Installation / Re: Video drivers
« on: April 21, 2016, 09:45:30 pm »

549
Setup & Installation / Re: Video drivers
« on: April 21, 2016, 10:48:15 am »
If you google lenovo 't42 os2 warp video driver' you get to

http://support.lenovo.com/gb/en/downloads/ds000838


ARRRRGGGGGGHHHHHHH!!!!!!!!!

http://support.lenovo.com/fr/fr/products/Laptops-and-netbooks/ThinkPad-T-Series-laptops/ThinkPad-T42?linkTrack=GPS:Body_Browse%20Products|Sub-Series%20Selected&tabName=downloads&beta=false

Then, remove selected OS and set it to "pick an OS" and add into third field " OS/2 ".
You have ATI mobility 7500 video driver for T42
 ;)
 

550
Applications / Re: AVxCAT 1.4 alpha
« on: April 12, 2016, 10:52:01 pm »
After a lot of work and taking account reported problems and end user whishes,

AVxCAT V1.4.0 (major update and added compatibility with ffmpeg 1.2.1, 2.1.5, v3 up to v3.0.1 r2) is now available on my web site.  See the "changelog.Readme" under AVxCAT page.

Thanks to those having reported found issue and having done tests as well to Dave and Gian Filippo having worked hard on ffmpeg.

551
Applications / Re: AVxCAT 1.4 alpha
« on: April 11, 2016, 01:55:41 am »
Some news.

After a lot of changes and code re-write since last beta and many tests with some new ffmpeg 3.0.1 build, all test seems to pass now as well as added vp9 (ogg or opus) and libtheora and more available options as well.

* Thanks to Dave and Gian Filippo having worked together with me resulting into finding source of some problems and new enabled codec support ( e.g. libopus with vp9 )           
 
I hope to publish the updated AVxCAT build very soon (docs to update etc...) with new added compatibility like ffmpeg v3.0.1 r2 (hobbes) and preserving ffmpeg backlevel support ( more ffmpeg version can be available on the disk now ) 
The new comming build will be a big major update

Cheers/2

552
Applications / Re: AVxCAT 1.4 alpha
« on: April 01, 2016, 06:36:48 pm »
Hi !

A few news.
I could do a few test with a basic ffmpeg 3.0.1 build and found several things.
This build required me to install several dlls and freetyp6.dll why v3.0 build didn't request it when running it in line mode cmd.

I had some changes to do on AVxCAT for compatibility and more should be done in next days
(e.g. crop like croptop cropbottom and pad functions have changed since v3.0 and uses now -filter option)
Currently, I could well convert video files and saw v3.0.1 allowing a few more fps than 2.1.5 ( nice )

Curious, I tried again the v3.0 (refered as n3.0 after having changed dlls for 3.0.1 and n3.0 works now !
I search which dll was the culprit making no return into the pipe for drdialog and it is " freetype6.dll "  <<

As soon my code is changed and some tests could be done, I'll post a message about next available beta build
Regards 

Update: first test are promizing

553
Applications / Re: AVxCAT 1.4 alpha
« on: March 31, 2016, 12:43:27 pm »

Hi Dave,
The problem I reported several weeks ago is always present and it is not possible to make this build compatible with AVxCAT until a well working pipe process with drdialog using RXU.dll (required).

It is very ease test, create a single drdialog, load rxutils and rxu and run ffmpeg from under drdialog using a named rxqueue (pipe) with FIFO option.

From all changes I could read under this build, resolving this issue should made it work with AVxCAT   

OK, I built trunk and it worked fine with AVxCAT excepting H264 where I had some unrecognized commands. I guess something was screwed with my tree.
I'll download the 3.0.1 tarball and build and upload that.

Great news.... thanks
Waiting on it for tests
 
 8)

554
Applications / Re: AVxCAT 1.4 alpha
« on: March 31, 2016, 12:34:37 pm »
Just try AVxCat

Only convert a mp4 to a wmv and that worked.
Maybe they are working on it, however syntax has changed a lot of times, release by release. My logs attempting to convert into wmv, the same you did, in this case here works right only SVN-r25157 and 2.1.5.
Regards.

Note: ffmpeg 1.2.1 was not supported by AVxCAT despite the pipe function works well.

As soon, version 3.0 didn't return expected information, the correct syntax can not be generated like it is with 2.1.5
V3.0.1 seems to resolve v3.0 issue and this is a very good news  :)

 8)

555
Applications / Re: AVxCAT 1.4 alpha
« on: March 31, 2016, 01:11:48 am »
Hi TeLLie,

Good with ffmpeg v3.0.1  :D
Could you please provide me with this 3.0.1 build ?

( I see a bug I'll resolve - ffmpeg debug-log should be enabled and not disabled )   

Can you please tell me more about your environment ?
Thanks.



Pages: 1 ... 35 36 [37] 38 39 40