Recent Posts

Pages: 1 ... 6 7 [8] 9 10
71
Networking / Re: Netdrive and ArcaOS
« Last post by Dariusz Piatkowski on April 08, 2024, 03:57:18 am »
Neil, everyone...

You can just run the NetDrive installer on ArcaOS, and it will replace the Arca Noae version with the full version. It even keeps your NetDrive settings the same.

Slightly different outcome here, although this is OS/2 SMP 4.52, so not an out-of-the-box AN install.

Anyways...I have been using NetDrive for some years now, and have installed in the same configuration the AN ArcapMapper stuff, primarily for testing purposes.

Both work, one does not replace the other (as far as binaries go), from functionality perspective that is somewhat the case (with the already mentioned shortcomings of the AN solution), but the programs are different.

So Glenn, you should be able to install NetDrive and have it functioning on it's own...but as mentioned, carefully navigate as both of these solutions attempt to deliver the same functionality.
72
Multimedia / Re: mplayer - just stopped working...sort of...
« Last post by Dariusz Piatkowski on April 08, 2024, 12:58:32 am »
Hello KO!

...Try -msglevel vo=9 for detailed message, please.

OK, done...here are the snippets for both SNAP & VMAN (where VMAN did actually work and SNAP did not):

1) SNAP
Code: [Select]
MPlayer 1.5-9.1.0 (C) 2000-2022 MPlayer Team

Playing G:\tmp\AUTO\20210130_210808.mp4.
libavformat version 59.17.102 (internal)
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x2f4cf0]Protocol name not provided, cannot determine if input is local or a network protocol, buffers and access patterns cannot be configured optimally without knowing the protocol
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang eng
VIDEO:  [H264]  1920x1080  24bpp  30.000 fps  16946.1 kbps (2068.6 kbyte/s)
KVA: Selected video mode = SNAP
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 59.21.100 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
Clip info:
 major_brand: mp42
 minor_version: 0
 compatible_brands: isommp42
 creation_time: 2021-01-31T02:08:22.000000Z
 location: +42.2680-083.0048/
 location-eng: +42.2680-083.0048/
 com.android.version: 10
 com.android.capture.fps: 30.000000
Load subtitles in G:\tmp\AUTO\
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, floatle, 256.0 kbit/8.33% (ratio: 32006->384000)
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
KAI: Open failed!!!
AO: [null] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [kva] 1920x1080 => 1920x1080 Planar YV12
KVA: Using 0x32315659 (Planar YV12) image format, vo_config_count = 0
KVA: Selected FOURCC = YV12
KVA: Setup failed!!!
FATAL: Cannot initialize video driver.

2) VMAN
Code: [Select]
MPlayer 1.5-9.1.0 (C) 2000-2022 MPlayer Team

Playing G:\tmp\AUTO\20210130_210808.mp4.
libavformat version 59.17.102 (internal)
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x2f4cf0]Protocol name not provided, cannot determine if input is local or a network protocol, buffers and access patterns cannot be configured optimally without knowing the protocol
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang eng
VIDEO:  [H264]  1920x1080  24bpp  30.000 fps  16946.1 kbps (2068.6 kbyte/s)
KVA: Selected video mode = VMAN
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 59.21.100 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
Clip info:
 major_brand: mp42
 minor_version: 0
 compatible_brands: isommp42
 creation_time: 2021-01-31T02:08:22.000000Z
 location: +42.2680-083.0048/
 location-eng: +42.2680-083.0048/
 com.android.version: 10
 com.android.capture.fps: 30.000000
Load subtitles in G:\tmp\AUTO\
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, floatle, 256.0 kbit/8.33% (ratio: 32006->384000)
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
KAI: Open failed!!!
AO: [null] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [kva] 1920x1080 => 1920x1080 Planar YV12
KVA: Using 0x32315659 (Planar YV12) image format, vo_config_count = 0
[swscaler @ 0x79d2b0]bicubic scaler, from yuv420p to bgra using MMXEXT
[swscaler @ 0x79d2b0]using unscaled yuv420p -> bgra special converter
KVA: Selected FOURCC = BGR4
Fontconfig error: Cannot load default config file
Selected font is fixed-width.
Selected font is fixed-width.
A:   nan V:   0.0 A-V:    nan ct:    nan   0/  0 ??% ??% ??,?% 0 0

I truncated the remaining LOG entries because they are just repeating as the file continues to be read.

The only strange thing (perhaps?) which I noticed is that VMAN also shows "KAI: Open failed!!!" log entry, however it does produce actual video playback.

...How about trying to launch mplayer with default options, that is, just [mplayer mp4-file] ? In this case, you should rename your ini file.

Finally, this is true for VLC ?

In order to rule out any of my config options I ran from CLI having previously renamed smplyer's CONFIG file so that it wouldn't be pulled in.

Yes, this is consistent in VLC as well (3.0.18 here), which I have set to VMAN previously (at some point in time).

Thanks!
73
Programming / Re: Bigicons
« Last post by David Graser on April 08, 2024, 12:25:24 am »
A new theme called GreebBlack.
74
Games / Re: Minecraft
« Last post by Jochen Schäfer on April 07, 2024, 11:05:08 pm »
There is no sound support yet, and yes, the SoftGPU renderer is dog slow and buggy as hell. I had to fix a couple of bugs to get it running.
I haven't tested registration yet, but login should work, when you have a ClassiCube login (go to the website).

PS: PrBoom is finished, but I have problem with the packaging. Perhaps I should simply zip it, and be done with it.
75
Networking / Re: [SOLVED] Networking not working In Virtual Box
« Last post by CalYY on April 07, 2024, 04:21:46 pm »
 I need to have below at end of startup.cmd to get full performance:

if exist %etc%\inetcfg.ini CALL inetcfg.exe -set all
call d:\mptn\bin\setup.cmd

you may need a dhcp line as well if does not start from elsewhere
76
Games / Re: Minecraft
« Last post by David McKenna on April 07, 2024, 02:59:02 pm »
Jochen,

 I gave ClassiCube a try and here I was able to run a single-player game - couldn't register for the server. Getting around 10fps, and can move the view by moving the mouse. Rendering is not very clear, I can't even tell what it is supposed to be showing - similar to what Martin shows. Sound and Music do not work (and can't be changed from a value of '0'). I tried all the setup parameters, but nothing helped. Not familiar with this game, so not sure how to play it...

Regards,

P.S. Did you ever finish PRBoom?
77
Games / Re: Minecraft
« Last post by Dave Yeo on April 05, 2024, 04:58:52 pm »
I gave it a quick try. Seemed to work at about 12 fps, didn't try to register, mouse pointer seemed stuck in the middle though it seemed to work when I moved it.
No idea how to play the game.
78
Applications / Re: XWP v1.0.16
« Last post by Pete on April 05, 2024, 02:48:19 pm »
I do not have Dynamic Icons installed as, quite simply, it is broken.

How, exactly, is it broken (vs. merely deficient)? I've been using it for 6+ years and it WFM. There's a new version awaiting release that fixes most of the problems I found and uses a lot less memory. Hopefully it will work for you.


Errmm.. A reply from yourself in the Bigicons discussion

In this case, the problem is not operator error or a bad install - it's just broken. I can reliably lock up my system by using D&D to copy a program object to a folder that's open in Icon view. You might think that I would have noticed this before but I use Xview almost exclusively and only have 2 folders that use Icon view (one of them being the Desktop).


Looking forward to trying the new release in the near future.


Regards

Pete


79
Programming / Re: Xpdf v. 4.01
« Last post by mauro on April 05, 2024, 02:36:53 pm »
.............
SYS1804: The system cannot find the file PAPER1.

found no reference on the net about this missing file

Hi Mauro

Installed Packages
libpaper.pentium4
libpaper-devel.pentium4

Kind regards, Elbert

right, that did the trick ! Thank you much
regards
80
Games / Re: Minecraft
« Last post by Martin Iturbide on April 05, 2024, 02:24:39 pm »
Hello
When you are saying "no mouse", do you mean a pointer?
The game captures the mouse and no pointer, and no crosshair is shown.
In my case, it is the behavior that you said.
The mouse does not produce any movement on the game. But I do see a white crosshair in the middle.
With ESC I can get the mouse pointer back.

Regards
Pages: 1 ... 6 7 [8] 9 10