Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - roberto

Pages: 1 ... 42 43 [44] 45 46 ... 54
646
Applications / Re: Two Programs with the Same File Association
« on: September 09, 2016, 03:27:03 pm »
You can use
assoedit.wpi

Saludos

647
Applications / Re: Mahjongg problems after memory is ok
« on: September 09, 2016, 11:45:06 am »
With the new coreutils 8.25 run very better, but not 100% ok , sometimes fail, but failures are more scarce, and only affect this application.
This is my personal experience.

Saludos

648
Applications / Mahjongg problems after memory is ok
« on: September 07, 2016, 11:00:56 pm »
If you select Options-setting-Automatically display hints selected, If run in automatic is ok, but it run by hand , the aplication fail.
Mouse pointer?
Graphic problem?

Saludos

649
Internet / Re: iCloud access
« on: September 07, 2016, 09:15:02 pm »
@ivan
Yes, but I can run 5d or 1d, but not more 1m,1y, fail. With all standard updates, and firefox 38.8.0

650
Internet / Re: iCloud access
« on: September 07, 2016, 04:57:03 pm »
I also have problems with the javascript , it's funny but in a yahoo page , with graphics fails me many days(more that 5 days) , and does not fail me graphics a few days .(5 days or less)
The web site:
http://finance.yahoo.com/echarts?s=IBM+Interactive#{%22showArea%22:false,%22lineType%22:%22line%22,%22range%22:%225d%22,%22allowChartStacking%22:true}

This fails since August last updates in os2
Saludos

651
Applications / Re: Error updating with anpm
« on: August 30, 2016, 01:29:52 pm »
Hello,
Thanks, to all. Yesterday I run a cmd with 2 lines like this (us you proposed), and give me the same error, but the difference is that now after restart is runing ok.
The cmd:
set LANG=en_US
yum reinstall libodin

652
Applications / Re: Error updating with anpm
« on: August 30, 2016, 01:03:00 am »
I 'm at a point where almost everything works for me , but now I can not install LIBODIN with e same mistake before.
Any ideas?.
I already works with version Lucide 1-3-6rc2 with poppler ver 0.42.0.2 ( oc00 ) and without cups-fiters (something similar with libodin ?)
I can not reinstall earlier versions of python2.76.14

Saludos


653
Applications / Re: Error updating with anpm
« on: August 28, 2016, 01:20:59 am »
Doubled folders is a (harmless and not permanent) bug of the WPS together with XWP. I don't remember if it occurs only for XWP's split view.
No is a bug, is ok or no?. I have not explained the problem well .
In a drive d:  I have 2 files with the same name, but in commamnd com or fc2 show the real name as other name. In drive show the *title name* The  OS2 can use two different names for one file , but one will be the title and other real name. But I understand that in drives should appear the real, not the title, or no?
On the other hand , to rename folders etc , usr , var and reinstall packages, anpm.exe fails to modify the config.sys . Of course this is not a new installation, but I think this program should have an option to recover from an error. Or at least a procedure to do so.

Saludos

654
Applications / Re: Error updating with anpm
« on: August 27, 2016, 02:25:32 pm »
Hi

Just curious did you install dash ?

If so look @ trac.netlabs.org/rpm/ticket/200
Yes I have dash installed, and I see the ticked 200, but I do not how to apply fix.

After rename the folthers usr, etc, and var , I see this photos:

Is this normal?

655
Applications / Re: Error updating with anpm
« on: August 27, 2016, 01:47:42 am »
You could also try 'yum clean metadata' before. That has helped in my case some months ago. (But I don't know, if that's related.) That's the same as the menu item YUM -> Cleanup -> Metadata cache in ANPM.
This option does not solve the probem , and the website you link from arcanoae is not the case .
I read this other link
http://www.os2world.com/forum/index.php/topic,1111.0.html see Lars number 6 and Andi 5
I made the Lars 6, and rename var var-stop too.

All ok, but only the standard packages.

I had to read me the packages installed on the anpm.log , and extract the names of installed packages , simiar this:
libc libstdc++6 pango freetype fontconfig zlib libkai pthread mmap fontconfig cairo os2-base pixman
qt4-assistant qt-doc qt4-demos qt4-designer qt4-devel-kit qtcreator qtcreator-doc  ghostscript-doc
os2-base os2-mpts curl zlib glib2 libglib-2_0-0  libgmodule-2_0-0 os2-release os2-base-0.0.0-11.oc00.i386
libpng  nspr  fontconfig-2.11.94-2.oc00.i686  libstdc++6 nspr nss libicu pixman cairo pango fontconfig freetype libkai
cube ca-certificates  tcl   libodin glib2  liblzma0 openssl popt urpo exceptq libgcc1 libgcc-fwd gcc-stdc++6 gcc-supc++6
 libc libgcc1 libgcc-fwd poppler poppler-data uclip poppler poppler-data

It would be interesting to have a list of installed packages , for a reinstallation .I do not know if this list is somewhere ?

In the reinstallation this packs fail:
----------[ 27 Aug 2016 02:22:01 ]----------
Executing: @python D:\TOOLS\ANPM\scripts\yum_install.py libodin
Running Transaction Check
Warning: RPMDB altered outside of yum.
sh: 1: /@unixroot/var/tmp/rpm-tmp.uCEZdT: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.DC26qm: Invalid executable file format
error: %prein(libodin-0.8.9-1.i386) scriptlet failed, exit status 2
warning: %post(libodin-0.8.9-1.i386) scriptlet failed, exit status 2

Error:  Rpmdb checksum is invalid: dCDPT(pkg checksums)
PackageSackError()
Return code: 0

----------[ 27 Aug 2016 01:56:33 ]----------
Executing: @python D:\TOOLS\ANPM\scripts\yum_install.py qt4-devel-kit
Running Transaction Check
Warning: RPMDB altered outside of yum.
sh: 1: /@unixroot/var/tmp/rpm-tmp.qVN6SC: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.51RMei: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.pn3810: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.VYDnfl: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.vz5kZt: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.Jjl1IN: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.jgq3XC: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.9zD06G: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.Kgj1qC: Invalid executable file format
error: %prein(libqt4-4.7.3.2-1.i386) scriptlet failed, exit status 2
warning: %post(libqt4-4.7.3.2-1.i386) scriptlet failed, exit status 2

warning: %post(qt4-assistant-4.7.3.2-1.i386) scriptlet failed, exit status 2

warning: %post(qt4-doc-4.7.3.2-1.noarch) scriptlet failed, exit status 2

warning: %post(qt4-demos-4.7.3.2-1.i386) scriptlet failed, exit status 2

warning: %post(qt4-designer-4.7.3.2-1.i386) scriptlet failed, exit status 2

warning: %post(qt4-devel-tools-4.7.3.2-1.i386) scriptlet failed, exit status 2

warning: %post(qt4-qmlviewer-4.7.3.2-1.i386) scriptlet failed, exit status 2

warning: %post(qt4-linguist-4.7.3.2-1.i386) scriptlet failed, exit status 2

Error:  Rpmdb checksum is invalid: dCDPT(pkg checksums)
PackageSackError()
Return code: 0

----------[ 27 Aug 2016 01:04:56 ]----------
Executing: @python D:\TOOLS\ANPM\scripts\yum_install.py poppler
Running Transaction Check
Warning: RPMDB altered outside of yum.
sh: 1: /@unixroot/var/tmp/rpm-tmp.fNWVTY: Invalid executable file format
warning: %post(fontconfig-2.11.95-1.oc00.i686) scriptlet failed, exit status 2

Error:  Rpmdb checksum is invalid: dCDPT(pkg checksums)
PackageSackError()
Return code: 0

Saludos

656
Applications / Re: Error updating with anpm
« on: August 26, 2016, 12:48:20 am »
BTW: To get the English messages for bug reports, set the env var LANG=en_US before calling YUM.
With en_US:
...
Reinstall     1 Package

Total size: 2.7 M
Installed size: 2.7 M
Is this ok [y/N]: y
Downloading Packages:
Running Transaction Check
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Warning: RPMDB altered outside of yum.
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
glib2-2.33.12-2.oc00.i686 has missing requires of libgobject-2_0-0 = ('0', '2.33
.12', None)
sh: 1: /@unixroot/var/tmp/rpm-tmp.Hyo8sc: Invalid executable file format
  Installing : coreutils-8.25-1.oc00.i686                                   1/1

sh: 1: /@unixroot/var/tmp/rpm-tmp.4pDXXR: Invalid executable file format
error: %prein(coreutils-8.25-1.oc00.i686) scriptlet failed, exit status 2
warning: %post(coreutils-8.25-1.oc00.i686) scriptlet failed, exit status 2


Rpmdb checksum is invalid: dCDPT(pkg checksums)
=====end ==============



Quote
See also the hints here. Maybe that will work in your case. If not, I would file a bug to the RPM/YUM bug tracker.
I have to read it again, but this pc the last update is  ----------[ 17 Aug 2016 16:02:24 ]----------
Executing: @python D:\TOOLS\anpm\scripts\yum_list.py
Setting up yum
Adding temporary repositories
Initializing cache
Requesting package list
Return code: 0

Saludos
Roberto

657
Applications / Re: Error updating with anpm
« on: August 25, 2016, 09:52:16 pm »
See http://trac.netlabs.org/rpm/ticket/200. Basically "yum reinstall coreutils" from a cmd prompt should fix.

This cmd fail:
Reinstalar     1 Package

Tamaño total: 2.7 M
Tamaño instalado: 2.7 M
Está de acuerdo [s/N]:s
Descargando paquetes:
Ejecutando verificación de transacción
Ejecutando prueba de transacción
La prueba de transacción ha sido exitosa
Ejecutando transacción
Advertencia: Las bases de datos (RPMDB) han sido modificadas por un elemento aje
no a yum.
** Se ha encontrado 1 problema(s) pre existentes en la base de datos RPM, este e
s el resultado de 'yum check':
glib2-2.33.12-2.oc00.i686 no se encuentran necesita de libgobject-2_0-0 = ('0',
'2.33.12', None)
sh: 1: /@unixroot/var/tmp/rpm-tmp.umJNw9: Invalid executable file format
  Instalando    : coreutils-8.25-1.oc00.i686                                1/1

sh: 1: /@unixroot/var/tmp/rpm-tmp.DG7wMv: Invalid executable file format


Rpmdb checksum is invalid: dCDPT(pkg checksums)

Saludos
Roberto

658
Applications / Error updating with anpm
« on: August 25, 2016, 04:17:08 pm »
The error log said:

----------[ 25 Aug 2016 15:50:46 ]----------
Executing: @python D:\TOOLS\anpm\scripts\yum_populate.py
Setting up yum
Initializing pipe
Pipe connected.
Setting up callbacks
Adding temporary repositories
Initializing cache
Setting up repos
Now checking metadata
Return code: 0
----------[ 25 Aug 2016 15:51:04 ]----------
Executing: @python D:\TOOLS\anpm\scripts\yum_list.py
Setting up yum
Adding temporary repositories
Initializing cache
Requesting package list
Return code: 0
----------[ 25 Aug 2016 15:51:50 ]----------
Executing: @python D:\TOOLS\anpm\scripts\yum_update_dep.py
Return code: 0
----------[ 25 Aug 2016 15:52:05 ]----------
Executing: @python D:\TOOLS\anpm\scripts\yum_update.py
Running Transaction Check
Warning: RPMDB altered outside of yum.
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
glib2-2.33.12-2.oc00.i686 has missing requires of libgobject-2_0-0 = ('0', '2.33.12', None)
sh: 1: /@unixroot/var/tmp/rpm-tmp.wLJR7p: Invalid executable file format
sh: 1: /@unixroot/var/tmp/rpm-tmp.Cx3987: Invalid executable file format
error: %prein(coreutils-8.25-1.oc00.i686) scriptlet failed, exit status 2
warning: %post(coreutils-8.25-1.oc00.i686) scriptlet failed, exit status 2

Error:  Rpmdb checksum is invalid: dCDPT(pkg checksums)
PackageSackError()
Return code: 0
----------[ 25 Aug 2016 15:55:58 ]----------
Executing: @python D:\TOOLS\anpm\scripts\yum_list.py
Setting up yum
Adding temporary repositories
Initializing cache
Requesting package list
Return code: 0

===========end log file=========
In display error see attach file.

What am I supposed to do now?

saludos
roberto

659
Applications / Re: Improving OS/2 Desktop Experience? What do you use?
« on: August 19, 2016, 02:54:55 pm »
Hello
It has several advantages , with one clik , you can bring up your entire desktop.
It lets you have exe files in the newdesktop smoothly.
In fact the w10 , has a button on the taskbar to bring to the front desktop .

I send my desktop and the folder newdesktop. 
Saludos
Roberto

660
Applications / Re: FF and TB not running at the same time.
« on: July 25, 2016, 09:49:19 am »
The problem has nothing to do with "run!"
.....
"The application has been updated, but your version of SQLite is too old and the application cannot run."
.....
Any suggestions of how to proceed?
See the readme.os2 file this:
===============================================================================
-- Compatibility Warning ------------------------------------------------------
===============================================================================

After using Firefox v4.0, Seamonkey v2.1, or Thunderbird v3.4 (or any later
version) your History and Cookies databases (places.sqlite & cookies.sqlite)
will NOT be compatible with earlier versions (i.e. FF3.6, SM2.0, or TB3.1).
A REXX script is available to restore compatibility.

* To preserve compatibility BEFORE running the new version:
  - download 'dbrestore.zip' from
      ftp://ftp.netlabs.org/incoming/mozilla/dbrestore.zip
    or
      http://e-vertise.com/warpzilla/dbrestore.zip
  - unzip it into your profile directory
  - make backups of places.sqlite and cookies.sqlite

* To restore compatibilty BEFORE running an earlier version:
  - run the script from your profile directory.

* To restore compatibilty AFTER running an earlier version
  (i.e. you forgot to run the script before):
  - look for 'places.sqlite.corrupt' and 'cookies.sqlite.corrupt' in your
    profile directory,   If they appear to be the right size, remove the
    '.corrupt' extension after deleting the newly-created versions.
  - run the script
  - if your history and cookies aren't restored, use your backup copies.

Saludos
Roberto

Pages: 1 ... 42 43 [44] 45 46 ... 54