OS2 World Community Forum
OS/2, eCS & ArcaOS - Technical => Networking => Topic started by: Ibrahim Hakeem on April 09, 2019, 04:26:06 pm
-
Hey all, as the title states, I currently have an Intel 5100 8086:4232 card that is compatible but I've failed to locate the necessary GenMU driver (save for OS2Voice which I do not have credentials to) to go with it. Is there any location that might have this driver available?
Many thanks.
-
Hi, welcome to the forum.
Can you try the OS2VOICE server again?
Try with this credentials (that was publically available):
ftp://genmac:unsupported@ftp.os2voice.org/
Remember that sometimes, even if the card has the same ID (8086:4232) sometimes differences on the firmware can produce incompatible. Good luck and please report back !!!
Regards
-
Hi Ibrahim
The driver you need is in this package ftp://genmac@ftp.os2voice.org/GenMU_INTEL_WIFI-0-4-9.wpi
However, looking at the W8086x4232.nif file I see you will need to make some changes as the W8086x4232.nif file references the older driver files NETW4X32.SYS and NETW4X32.REG but supplies the later driver files NETW5X32.SYS and NETW5X32.REG.
So, you will need to change both mentions of NETW4X32 to NETW5X32 in the W8086x4232.nif file.
Also, looking at the patch.dat file included it is different to the patch.dat file I have for my Intel 5100 8086:4232 using the NETW5X32 drive files so the patch data is probably for the NETW4X32 drivers.
I have attached the patch.dat file that I know works.
Hopefully Doug, who usually takes care of the genmac driver file packages, will read this and double check the package.
Regards
Pete
-
My sincerest thanks to you both! I'll be sure to report back with results once I get time to work on my X220 again :)
-
I'm glad to report total success! After the wrangling with file names and references, everything runs crisp!
This marks my first 100% functional OS/2 Warp install on any system.
-
Hi Ibrahim
Congratulations on joining the small number of OS/2 users who have got their Intel 5100 working :-)
Regards
Pete
-
What is the credentials to get this. the one that Martin posted did not work for me.
-
Hi Eugene
Martins url - ftp://genmac:unsupported@ftp.os2voice.org/ - works for me.
Might be worth trying again - maybe the server had a glitch.
Regards
Pete
-
I need the login to authenticate sorry I was not clear.
-
I need the login to authenticate sorry I was not clear.
It was clear.
Without having tested that: Apparently your FTP client doesn't support the userid:password@ syntax. Just try the URL without it and type it in when the server requests them.
-
My next qwquestion is why do the wpi files not work for me in Warpin It does this on both my laptop and also on my desktop as well. it says it is a macro,
-
My next qwquestion is why do the wpi files not work for me in Warpin It does this on both my laptop and also on my desktop as well. it says it is a macro,
Eugene, this is something you can try if you use FM/2 file manager. FM/2 uses the default OS/2 association. There could be a problem with how wpi's are associated in you operating system. In FM/2, you can change its default association to point the wpi file directly to the warpin exe file instead of relying on the system default association. I normally start my wpi file from either FF download or from FM/2. I am assuming FireFox uses the system default association which does you no good.
-
I thank you very much for that nugget.
-
I thank you very much for that nugget.
There is a program that can unpack, install, and view config wpi files. You just copy it to your warpin directory and make a program object. It is found on Hobbes at
http://hobbes.nmsu.edu/download/pub/os2/util/archiver/wpiview105.zip
There is a later version at
ftp://ftp.netlabs.org/pub/vxapps/wpiview/wpiview110.wpi
The exe, the help, and the dll were updated.
There was a later test build of the exe that I found that I like better that I have. It is a month later than the 110 build. Just copy the exe to you Warpin directory. It cannot be found on Hobbes. I believe the wpiview.exe is build 112.
If you don't have the latest Warpin, it can be found here
https://ecsoft2.org/warpin
-
And I thnk yo for that information.
-
Hi
Also, looking at the patch.dat file included it is different to the patch.dat file I have for my Intel 5100 8086:4232 using the NETW5X32 drive files so the patch data is probably for the NETW4X32 drivers.
I have a question here, does the patch.cmd does the same thing that "EgenM32W (http://hobbes.nmsu.edu/h-search.php?key=EgenM32W)", but in an automatic way?
Regards
-
Hi Martin
Yes, as I understand it it overwrites an existing nic entry with the data necessary to allow genmac to work with the new nic.
Regards
Pete