OS2 World Community Forum
OS/2, eCS & ArcaOS - Technical => Setup & Installation => Topic started by: Sigurd Fastenrath on October 21, 2014, 08:52:40 am
-
Hi,
just some information here, so I do not need to write it a second time (already using Online Translator):
https://translate.google.de/translate?hl=de&sl=de&tl=en&u=http%3A%2F%2Fwww.os2.org%2Fviewtopic.php%3Ff%3D2%26t%3D436 (https://translate.google.de/translate?hl=de&sl=de&tl=en&u=http%3A%2F%2Fwww.os2.org%2Fviewtopic.php%3Ff%3D2%26t%3D436)
As I do not know if one can see the pictures I attach them here as well:
Have fun!
Sigurd
-
I can see the pictures. I think that is neat. 8)
-
Here some Benchmarks I just made with sysbench 095c, Panorama Vesa FullHD, attached. Mostly all four kernels had been at 99,9% during testing, the system got a bit warm and the fan worked, but I was not worried about burning it up ;-)
In summary:
102.062 Graphics Mark
4573.497 CPU integer-marks
488.109 CPU floating point-marks
4728.740 DIVE-marks
59220.042 File I/O-marks
7189.040 Memory-marks
Disk I/O disk 0-1: 244199 MB - TOSHIBA THNSNH256G8NT
Avg. data access time : --.--- milliseconds
Cache/Bus xfer rate : 203.313 Megabytes/second
Track 0 xfer rate fwd : 234.582 Megabytes/second
Middle trk rate fwds. : 244.328 Megabytes/second
Last track rate bwds. : 245.525 Megabytes/second
Average Transfer rate : 241.479 Megabytes/second
Disk use CPU load : 8.330 percent
8)
:)
-
I made some more tests, here are the Problems occured so far:
Sound:
Latest UNIAUD loads, but I get no Sound. Usually I try to get info with "unimix -list", but this leads here to the result
"Invalid number of PCM instances on Adapter 0"
I googled this and someone solved it last year with using the latest UNIAUD. But I already have the latest UNIAUD....
Please see attached Picture "Eingefangen004"
QSINIT Loader
I do not know why - the latest QSINIT Loader 299 results in a blinking Cursor once I selected to boot it just stopps without any message - so I can not see what goes wrong. The OS/4 Loader does work so far without Errors.
Touchpad
I can not get the Touchpad to work, I do not know why and where to lock. I guess this is the "unknown Mouse Adpater" shown in the Hardwaremanager. I tried IBM, SMS and Amouse 2.80.
Fortunately the USB Mouse is working
What I still can not believe is that both USB 3.0 connectors are working as USBEHCI 2.0 ones. Well - no reason to complain I guess... ;)
More to come... 8)
-
Wim Brul filled the Touch task with another Masterpiece of Software!
The Touch Driver is at 100% now, for more information please follow the link in this thread:
http://www.os2world.com/forum/index.php?topic=619.msg6144#msg6144 (http://www.os2world.com/forum/index.php?topic=619.msg6144#msg6144)
If the Roadmap of Arca Noae will come true (Uniaud refresh, and Intel WLAN Drivers) wihtin this Year one will be able to use the Sony Vaio Pro 13 with a lot of benefits :)