Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jim

Pages: [1] 2
1
Setup & Installation / Re: OS/2 as it was
« on: February 20, 2022, 03:00:26 am »
I put money into three or four versions of OS/2 and one version of ecommstation. I love the basic OS/2 interface and the way it works.
ecommstation wasn't an upgrade. it was os/2 with  a lot of crap thrown in.  I decided I would not throw any more time or money down that hole.
I have tried Linux and find it wanting. the underlying operating system is ok but overly complex and things (files) are scattered everywhere. trying to repair a problem is a mess. 
I have about 50% of the time installed programs and the don't run.
The desktops change with every upgrade and the settings are lost...I don't consider the desktop to be stable.  The thing locks up or crashes quite often the O/S still seems to be running but you can't cleanly get to it and restart it.  So I am done with that. and trying to make broken things work.
So here I am almost 80 with bad vision and some cognitive difficulties , I cannot understand icons  so they don't do me any good.
So I am trying to set up a character based desktop.
So I am running on a 10 year old Mac with a lighted keyboard.  I don't use the Mac apps much the are too dumbed down to be useful and their cuteness is useless.
On the Mac I use Dos with Dosbox-X and OS/2 4.52 on VirtualBox.
So I guess that is where I am going to stay.

2
Setup & Installation / Re: OS/2 as it was
« on: February 08, 2022, 06:54:45 am »
Thanks for your help I did get mozilla up and running. The mail client doesn't like SSL much, but life moves on maybe FTP will work better.

3
Setup & Installation / OS/2 as it was
« on: February 08, 2022, 02:30:48 am »
I used to have an ongoing love affair going back "os/2 for Windows". I stopped using it with eComstation 1x as it cost  a lot of money but I found it was a money sponge.  Always an upgrade that didn't help but increased to problems that existed.
So here I back with my memory but lack of cognative abilities.
I read about eComstation and lurked around there for years but never saw anything that indicated progress.
I heard about Arca Noae, I looked through the boards, but it seemed like Linux with OS/2 on top.
I am running away Linux, used it for a few years years but it is a rapidly approaching disaster it appears to me to be Macos in dirty clothes.  A bad files system with a pretty desktop. That doesn't suit me very well.
So here I am with an old copy of OS/2 4.52 up and running in a virtual machine.  It runs find
I found I needed to get on the internet to download files.  I have that setup.
I tried to get Seamonkey running.  I can't do that.
It appears that it has been gotten to by Linux.
I do not want to use Linux, does anyone know of a place I can get older virgin copies of executables. That are still able to run on pure OS/2.
I know of Hobbes but how do you tell what is OS/2 and what is not.
Any information would be appreciated.

4
Sorry for the long delay,  thought I should finish up so other people who may be trying to help can move along with their lives.
I cant muster the patience or knowledge to perssist.
Thanks, all

5
Comments, Suggestions & Questions / Re: Just started to dabble in os/2 again
« on: September 25, 2020, 08:15:37 pm »
I think the Italian localization would be a major problem for me.  I do appreciate the offer.

6
Comments, Suggestions & Questions / Re: Just started to dabble in os/2 again
« on: September 21, 2020, 02:13:41 am »
Mac OSX 10.7.5

7
Comments, Suggestions & Questions / Re: Just started to dabble in os/2 again
« on: September 19, 2020, 04:49:19 am »
Got that solved discovered how to make a legal iso file on a Mac.
But, it seems, one step forward equals one step.  I have lost the "Drives" object. Using the CLI the D: drive is there and all the file are correct.
Any ideas how to correct the missing object.

8
Comments, Suggestions & Questions / Re: Just started to dabble in os/2 again
« on: September 15, 2020, 02:15:42 am »
The critical part Is generally I can't get anything from outside the VM to inside.  So at this point I am stuck and can't go on.
If I had the capability of setting up some way of getting things back and and forth I could press on.

9
Comments, Suggestions & Questions / Re: Just started to dabble in os/2 again
« on: September 05, 2020, 07:42:21 am »
This is a reply to all of the last 3-5 responses to me.  None of this is working.  I need a reliable way of getting files from Host to guest.  Otherwise it is just a lot of flaying around and getting nowhere.
I have gotten .iso's to transfer but I don't know why some will and some wont.
The VBOX additions I tried didn't work, it was expecting some sort of unix file system, which I don't have.
I have spent a long time with computers, about 45 years, and I have seen too much of abandonware and vaporware in my life.  I won't spend anything more to get something that will fix everything but fixes nothing.
I gave OS/2 a long ride but I guess that's over.
The only thing that is constant is good old DOS.  The DOS in OS/2 as a matter of fact, if I can't get files of and on what is the point.
Sorry, to be such a negative person but all I want is something that will take me through my elder years without a lot of wasted motion.
Thank You all for trying to help.

10
Comments, Suggestions & Questions / Re: Just started to dabble in os/2 again
« on: September 04, 2020, 05:44:15 am »
I have done that and am currently running that in a VM. It says it is 4.5.2.  I have 3 CDs from eCommstation 1.
I use that for files when I can find them.  I have been using cd images to transport data back and forth. That is unreliable.
I would like to get USB working and it appears I have the drivers but I don't know how to install them.  If you could help with that I would appreciate it.
Thanks Jim

11
I am using OS/2 4.52.  I am pretty well soured on UNIX/Linux other then a server. And even then it is a chore. Every time I turn around something is updated and it requires other things to be updated. Programs are not packaged complete. I install a program and in about 25% of the cases it disaperes. Some other cases it is not on a menu anywhere.
If I can find it I have to identify the executable.
My point is a am old and crotchety and my memory is shot. I just want it to work for the things I want to do. Email, web browsing and a spreadsheet.
I think that's it I think I have Internet connectivity but there isn't a web browser included that will show much of anything.
There is no email client but there is Lotus Smartsuite  and that works.
Anyway, my needs are minimal but I have no interest in learning .  I am changing from a programmer to a user.
If you can help that's great if not DOS here I come.

12
Comments, Suggestions & Questions / Just started to dabble in os/2 again
« on: August 26, 2020, 04:01:38 am »
Been doing that since 2.1. But had not used it in years.
I, of course, have a question. It appears now that there is a version called "Arce Noae" or something like that. It also appears to be a Linux distribution. As someone who has dinked with Linux for years I gave up on it about 6 months ago because it was inconsistent and flaky.
That's why I went back to OS/2 to see if it would allow me to just be a user and not an engineer.
I have OS/2 up and running now and am trying to see if it can be my daily driver.
This is my question when reading on the internet about something how do know if things like applications work under OS/2 or Arce Noea. 
The appear to be all mixed together.
Thanks, jim

13
Comments, Suggestions & Questions / OS2world.net mail
« on: July 01, 2018, 11:46:07 pm »
I am trying to get information on OS2world email.
If I go to "os2world.net" I get redirected here.
Does it still exist? If so, are there settings for the email.

14
I am a newbie to this forum, so please forgive my errors. Not a newbie to OS/2, having first started with it with version 2, but haven't used it in a long time.
This observation is very self centered, as it involves what I want to do.
I want to find a laptop that will work with eCs 1.
I do have an old Toshiba (Satellite M35X-S161) but it gets a can't operate this drive which as I remember means I don't have the correct driver. Appreciate any help on this.
As to the question at hand.  It would seem you could get everyone on "O/S2 World" to list what they have and drivers that work.
If they have a Toshiba Satellite XXXX-XXXX state that and what works and what doesn't.
If they have a desktop they same.
If they have a custom desktop. what parts work and what don't.
If they are using a virtual machine then what type and what are the settings.
I know it is a big job if you look at the end of the job it seems gigantic, but if we look at just one at time it will grow.
Last time I looked at the HCL there were only two laptops, I can't believe those are the only ones. I don't know if the HCL is modifiable then it should be. Have someone knowledgeable check them and lock them.
Please excuse me if I stepped on any toes or broke any rules.

15
Setup & Installation / Re: ECs on a Toshiba M35x laptop
« on: September 13, 2014, 12:58:29 am »
Thanks, Pete.
I have DFSEE on a bootable CD.  Having never used it before I have no idea how to proceed.
Can you give me a Step by step on how to get the information you pointed out.

Thanks, Jim

Pages: [1] 2