Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Sigurd Fastenrath

Pages: [1] 2 3 ... 41
1
Sigurd, what bldlevel does your copy of LANINST.PGM report?

Hi Steven,

I unfortunately can not find a file with this name on my pc, where I do have the copied CID files form the WSeB CD as well. (A full serach ended with no result).

Where should this file be located?

Thanks again!

Aaah this is soooo fun. Anyway on the WSeB CD (this can depend on the language). On an English WSeB its located in:
\CID\SERVER\IBMLS\IBM500S1
In that directory is:
SRVRINST.ZIP

In that ZIP file on my system is LANINST.PGM.

Roderick

While I can't see the fun in this, maybe because of my german sense of Humor, I will Look there.

2
Sigurd, what bldlevel does your copy of LANINST.PGM report?

Hi Steven,

I unfortunately can not find a file with this name on my pc, where I do have the copied CID files form the WSeB CD as well. (A full serach ended with no result).

Where should this file be located?

Thanks again!

3
Sigurd,

This

  SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff

indicates we failed with stack overflow.  Of course, this does not tell us why.  We need to see to logs to get some idea of what the installer was doing at the time of the exception.

Hi Steven,

attached are the only two log files related to lan server stuff, I was able to find.

There are no Server related logs in \var.

Thank you very much,

Sigurd

4
Thanks Doug,

but unfortunately no change.

I think, I will start from scratch once I have time for it.

Thanks to all!


5
Thank you Roderick and David, but none of the tipps helped. The same POPUPLOG.OS2 as before.

6
Bar Metall, Asus ROG Zephyrus G14 3024

7
Hi Steven,

thank you very much for looking into this!

This is what POPUPLOG.OS2 shows:

10-25-2024  20:28:18  SYS3175  PID 0059  TID 0002  Slot 00a7
C:\IBMLAN\INSTALL\IBMLAN\INSTALL\LANINST.PGM
c0000005
0007abf7
P1=00000008  P2=00004f34  P3=XXXXXXXX  P4=XXXXXXXX 
EAX=00000005  EBX=0000004e  ECX=0000000c  EDX=e3980000
ESI=00b90000  EDI=00370000 
DS=0000  DSACC=****  DSLIM=******** 
ES=05c7  ESACC=00f3  ESLIM=00003fff 
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=003f:0000abf7  CSACC=00fb  CSLIM=0000dd83
SS:ESP=05c7:00003732  SSACC=00f3  SSLIM=00003fff
EBP=00b9504f  FLG=00010212

LANINST.PGM 0006:0000abf7


Is it of any help?

Thanks again!!

EDIT;

Searching for SYS3175OS/2 leads me to this homepage:

https://www.ibm.com/support/pages/os2-warp-server-40-sys3175-installation-error-and-multiple-cd-rom-drives-servers

It refers to multiple CDROM Drives, if I understand correctly. But I do not have more than one, and this is usb.
I will try to disable USB CDROM Support and try it again.


EDIT II:
Same error, no difference


8
Setup & Installation / OS/2 Warp 4 Tutorial on ArcaOS 5.1
« on: October 24, 2024, 08:06:30 pm »
To full fill my attempt of turning ArcaOS 5.1 in OS/2 Warp 4, I try to get the Tutorial to run.

I copied all the necessary files etc. like I did so many times before, beginning with some ( I do not know exactly wich ) Version of ArcaOS the Tutorial does not work as designed.

It creates the Training Folder on the desktop, but instead of showing the application it opens teh help file with the viewer, please see attached picture.

I guess this is the problem: the files must be connected to the viewer in some way.

Is it possible to turn this back for the tutorial program?

What do I have to do to get it up and running?

Thanks in Advance!

 


9
I want to install the WSeB Server parts on Top of ArcaOS 5.1, as I did several times before, using the great tool of Alex Taylor.

Unfortunately I missed the point to NOT install Samba/Network parts during the initial ArcaOS Installation. So I do get an error code (I think it is something like X1604, do not have it around yet) when trying to install the WSeB parts.


As I do not want to reinstall everything from scratch (it is a bit of a special installation, what would lead to a lot of work), what components do I have to deinstall, and how, to get the Server Tool from Alex to let it do what it is supposed to do?

Thank you very much for hints!

I will attach a screenshot of the error code in a few hours.

EDIT: added Screenshot

10
Thanks Dave

On the Lenovo Miix that I'm trying I found that the UEFI BIOS has an options to select which to boot first. I selected ReFind from the list and it is the default now.
I will have to check the others UEFI machines I have.

Another thing, have you tried REFind with Secure Boot enabled on the UEFI BIOS?

Regards

If you do not find such Refind Option (as it is in "my" BIOS), try to select "Windows Boot Manager", what is the one rEFInd replaced in my machine.

11
Multimedia / Re: Updated Uniaud32 build
« on: September 13, 2024, 06:49:48 am »
Hi Mark,
thank you very much for your exzellent Tipps and Hints, as well as the PDF. Due to being busy I gave it all a first shot, found out there is with switch A:2 an "Auto mute" ID6, but had no luck so far.

I will come back to this later for sure, but this will take some weeks, as I have, besides my daily work, have to finish the 4th book of my nith-part fantasy Story. There is a new part each year, it should be ready at 24.9.24 (I have a faible for numbers, i.e. the first part is available since 21.9.21, the fifth will be at 25.9.25 and so on, German calender format) , so I have to Focus on this topic for the next couple of days.
It is free if charge, but unfortunately only available in German.

https://im-schatten-der-drei-sonnen.de/

Thanks again!

12
Events / Re: Warpstock 2024: Coming? Not Coming? Why?
« on: September 11, 2024, 08:04:55 pm »
Well, America is long way, I did not even attend Warpstock Europe this year, even when it took place in Germany.
During the last 2 or 3 Years I did only watch part of the Videos, it was nice to have a crross meeting Warptock US /Europe last year.
Most of the German users faded out.

Even though ArcaOS is for at least 5 years out, every important thing for me did not came, even if there was allways and anytime told
"It is on our List", "We are very close".

- WLAN support (I guees this is not even on the List anymore)
- German NLS
- Browser
- ...
I really appriciate was has been done to ArcaOS, thats why I still experiment with it, GPT, UEFI Support, Panorama, USB 3, these are all really big effort, considering the few developers and the long time outclassed Kernel.

But on the other hand together with others we spent a reasonalbe amount of money for the browser, the ongoing subscriptions, but did never get, what we wanted. ArcaOS did never really commit to the Browser Initiative, as far as I know.

And more important to me: the RAM problem on modern hardware will prevent ArcaOS to use a new browser, even if it will ever see the light of day.

So, for me instead of having GPT, UEFI and this stuff, I would have been more happy having a browser on older hardware, like an Thinkpad X250, but where I can access the full 4 GB and do not need UEFI nor GPT.

ArcaOS is focussed on industrial customers, that is understandable for money reasons, but the death to the private comunity.

In the end - who cares?

Attracting young users is a kind of, well "Nice dream" when one look at generation Z. I do really not know anyone new to OS/2 since the last 15 Years, and if, as mentioned, in cas of using it as a retro plattform. But even this is some kind of false, if you want to have a really good retro platform, you take Linux free of charge, use DOSBOX, SCUMVM and Virtualbox to operate what you want.

I wish all a good Warpstock but expect nothing new from it, besides what I have heard for years regarding my targets. "It is on the List, We hear you." I do not listen that much anymore.

All the Best!







13
Setup & Installation / Re: Converting ArcaOS 5.1 to OS/2 Warp 4 (parts)
« on: September 08, 2024, 08:03:55 pm »
Hi Martin and all, I added two more tips and tricks. They sound very simple, but they are very helpful!

- Changing Icons
- Changing BootLogo

14
Setup & Installation / Re: Converting ArcaOS 5.1 to OS/2 Warp 4 (parts)
« on: September 08, 2024, 04:44:01 pm »
Hello Sigurd

Great experiment, I enjoyed reading it (translated in English).

Which is the screen resolution that you have for that laptop?

Regards

Hi Martin,

thank you. I use 1400×1050, it is in the second picture.  Maximum on this Device is 2880X1800.

15
Setup & Installation / Converting ArcaOS 5.1 to OS/2 Warp 4 (parts)
« on: September 08, 2024, 11:51:02 am »
For those, interested in having some Warp 4 Programs and the look and feel of Warp 4 on ArcaOS 5.1, please look here:

https://www.os2.org/viewtopic.php?f=19&t=4081

Please use Onlinetranslator.

Here is a picture of my Bootlogo for this Installation:

Pages: [1] 2 3 ... 41