Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Remy

Pages: [1] 2 3 ... 35
Applications / Re: CUA Draw and CUAPaint
« on: September 19, 2022, 05:54:00 pm »
They work well under ArcaOS.

Storage / Re: DISKIO - updated version in need of TEST
« on: August 15, 2022, 08:53:45 pm »
Does it have a sense to do diskbench on SSD with not aligned partition ?

Ising latest Thunderbird build.

Gmail imap only:
- Trying to change from normal password to OAuth under one gmail account, it will not work.
- Trying to add a new gmail account with OAuth, it opens a google logon screen, I could login but then, thunderbird is in a loop
  and it never creates the new gmail account  (it looks like it is hanging due to a gmail account already exist !)

? strange...

Applications / Re: AVxCAT (v2 into test)
« on: May 30, 2022, 06:41:11 pm »
New update available (get update)

- several corrected bugs
- enabled video concat with/without gap files
- more...

Added a > in front of latest main changes in the text file included in the zip file.

* One main process was re-written to easier update/upgrade my code and a few optimized codes)

Applications / Re: Test build of dooble with qt5
« on: May 18, 2022, 12:54:59 pm »
I would track a shipping number and got a message about javascript and meta-refresh not supported etc....
After using home page and then trying again the link, it works....

It seems javascript or other supported code issues exist under Dooble
Link I tried (stop/start dooble and then try the link from link field)
Rem: tracking number set to 0 for the test.

Applications / Re: Test build of dooble with qt5
« on: May 18, 2022, 09:51:45 am »

I defined  as my home page
After system reboot and starting Dooble, its look loading the page but nothing is displaied (blank page)
I load an other web page and then back to duckduckgo home page and this time, it display the page as it should !
Tried several times (closed/started dooble) and same issue each time !

What could be the culprit ?

Applications / Re: Test build of dooble with qt5
« on: May 17, 2022, 10:03:51 pm »
Hi Remy,

 Well, at least it works now! Not sure why, but if you uninstalled, then re-installed QT5, I can only guess that there may have been corruption in some configuration file somewhere from the first install. Enjoy!


Hi David,

I uninstalled, then re-installed QT5 to try to create again the problem again.
No need to uninstall / install QT5 to have it working, As I wrote, Since I could bypass the crash removing the php rssfeed part of the web page, and then only load this php code alone resolved the problem and since this time, I'm able to load the full page !!
This is why I'm searching what could be saved and where to no more go into the bug...
Having an unresolved issue is not good and may happen again or produce other type or issue in the futur...

Applications / Re: Test build of dooble with qt5
« on: May 16, 2022, 09:44:23 pm »
I uninstalled / installed QT5w* as well dooble with .dooble delete to have initial state ....
And since I could bypass the close/crash state (removing a remote rssfeed load from main home page and loading this feed as a single page), I'm no more able to reproduce it !
Surprizing. what could have changed since I did the "bypass" action ? Is anything stored and where ?  :-\ ::)

Applications / Re: Test build of dooble with qt5
« on: May 14, 2022, 01:20:29 pm »
Hi Remy,

  I looked at yout testlog file, but didn't see anything unusual there in comparison to mine. Maybe the php code you mention is the trigger of the issue? If you can describe how to use it, I'd be glad to try it out just to confirm it is if you want...


Hi David,

Since I could bypass the crash (close) of Dooble, I tried to go backward, deleted .dooble path, uninstalled/install dooble (like I did previously) but this wasn't enough to go into this bug again !  (Hum, not Dooble and may QT5 issue !)
Next, I'm going to uninstall/install QT5 + dooble and check what happens then...

Internet / Re: Dooble Browser rendering - missing characters
« on: May 12, 2022, 06:48:56 pm »
If you examine the image, it is the-weather-network-logo.svg and likely the text beside it is also svg. Hmm, going to and running an example in Dooble results in "Sorry, your browser does not support inline SVG" SeaMonkey the same result.
In conclusion, seems SVG support is more broken in Dooble then Mozilla.

svg issue too on

Applications / Re: Test build of dooble with qt5
« on: May 12, 2022, 01:06:17 am »
Hi Remy
I have some immediate and persistent closures with dooble, when I select File-Print preview. In the rest it is quite good with some sporadic closure.
Good luck and greetings

Hi Roberto,

I just did a test using File-Print preview after I could open my web page using the separated load like I explain allowing me to have Dooble not crashing...
The File-Print preview crashes with a trap file ! (interesting)

Exception C000009F - Breakpoint

 Process:  W:\USR\BIN\DOOBLE.EXE (04/24/2022 21:32:12 1,442,569)
 PID:      5F (95)
 TID:      0C (12)
 Priority: 200

 Filename: W:\USR\LIB\QT5WEBC.DLL (09/25/2021 19:47:11 92,191,016)
 Address:  005B:9E821EA1 (0001:03321EA1)


 Failing Instruction

 9E821E95  ADD   ESP, 0x1c       (83c4 1c)
 9E821E98  RET                   (c3)
 9E821E99  LEA   ESI, [ESI+0x0]  (8db426 00000000)
 9E821EA0  INT 3                 (cc)
 9E821EA1 >UD2                   (0f0b)
 9E821EA3  PUSH  0x2             (6a 02)
 9E821EA5  LEA   ESI, [ESI+0x0]  (8db426 00000000)
 9E821EAC  LEA   ESI, [ESI+0x0]  (8d7426 00)



 EAX : FFFFFFFF   EBX  : 22C00000   ECX : 22C00000   EDX  : AE965E00
 ESI : 13641544   EDI  : 00000000
 ESP : 065EF7B0   EBP  : 22C04000   EIP : 9E821EA1   EFLG : 00000286
 CS  : 005B       CSLIM: FFFFFFFF   SS  : 0053       SSLIM: FFFFFFFF

 EAX : not a valid address
 EBX : uncommitted memory allocated by LIBCX0
 ECX : uncommitted memory allocated by LIBCX0
 EDX : read/write memory allocated by LIBCX0
 ESI : read/write memory at 0002:00071544 in QT5WEBC
 EDI : not a valid address


 Stack Info for Thread 0C

   Size       Base        ESP         Max         Top
 00080000   065F0000 -> 065EF7B0 -> 065ED000 -> 06570000


 Call Stack

   EBP     Address    Module     Obj:Offset    Nearest Public Symbol
 --------  ---------  --------  -------------  -----------------------
 Trap  ->  9E821EA1   QT5WEBC   0001:03321EA1   __ZN6pdfium4base28SetSystemPagesAccessInternalEPvjNS0_30PageAccessibilityConfigurationE + 41 0001:03321E60 (page_allocator.o)

 Lost Stack chain - invalid EBP 22C04000


Trap file available

Applications / Re: Test build of dooble with qt5
« on: May 12, 2022, 12:53:07 am »
Hi Remy

Might be worth checking the following are installed, replace any i686 versions with P4 versions

libxslt  - 1.132-1 P4
libxml2  - 2.9.10-3 P4
libssp  - 9.2.0-5 P4
libstdc++  - 9.2.0-5 P4
libc  - 0.1.10-1 P4
libgcc  - 9.2.0-5 P4
libgcc-fwd  - 9.2.0-5 P4
libicu  - 68.1-1 P4

Other than that I am out of ideas...




I did it but got same problem.
One interesting thing is that I had backlevel on libicu due to problem using 68.1-1 i686 to allow Ooffice to work but using the latest with P4 allow Ooffice to work too while it crashes when in i686...


More news :

I progressed...
The problem seems to be into Dooble code or some part of its code due to timing issue or something else

I just did a test removing a small php code creating rssfeed display using ArcaNoae rssfeed link.
The page loaded without crahs !
I then loaded the rssfeed part code only
(rssfeeds entries displaied correctly)

Then, while the code is memory loaded, I tried to open the page which always crashes and this time, it opens without crash !
- interesting -

From these tests, I see that loading the original webpage with all code always crashes...

While opening a page without the rssfeed display code and then open the rssfeed display code only
and finally opening the original page will full code opens without a crash....

(The change is that all code is memory loaded - cache - in the second time and faster while when it crashes, the load of the rssfeed is longer and happens after the page is loaded....). Hope this could help resolving this issue which I hope could resolve other site having same kind of problems...


note: The php code creates html entries from the input rssfeed
(I can forward the used code if need to identify whats going wrong into dooble)

Applications / Re: Test build of dooble with qt5
« on: May 11, 2022, 07:44:30 pm »
Hi Remy,

 It is very strange! I watched your video so I see what you mean. The only thing I have seen here anything like that is when I tried to open a private window ('Settings'->'New Private Window') - Dooble immediately closed with no trap file. Are you trying to run in 'Private' mode? Maybe this is a bug (although I reported this and was told it is not supported in '--single-process' mode and Dooble closed on purpose).

 At this point we can only experiment - one thing I would try is removing or renaming the C:\Home\.dooble directory. There may be something corrupted in one of the settings files that would be fixed with a new one (created on first start). Of course any settings you may have made will be re-set, so be aware of that.

 Also, strange there is no trap file (unless not really a trap) - are you certain 'exceptq' is properly installed? Try re-installing just in case. Also, look for old versions of exceptq.dll and distorm.dll (the 2 DLL's installed by the exceptq rpm) elsewhere on your system that may interfere.

 If you upload a copy of 'testlog -c generic' I could compare that to mine and see if there are any obvious differences in installed packages that might give a clue if nothing else works.

 Overall, I am very happy with Dooble - yes it has issues, but compared to Firefox issues, they are minor (for me anyway - I can use my Bank again!). I am able to once again navigate the Internet without having to resort to Windows or Linux...


Hi David,

I sent you a PM with link to my testlog file
I first tried your suggestions but didn't work better nor trap files
I then tried Pete suggestions and again, it didn't work better' and no trap files


ANPM library level before I upgraded to pentium4 some of them as suggested by Pete

Applications / Re: Test build of dooble with qt5
« on: May 10, 2022, 01:11:17 pm »
Hi Remy,

 I use both ffturbo and OO quickstart, and Dooble runs well here so I guess you can say it is compatible. Trap files usually end up in C:\var\log\apps on my system - look there for any you might have. Having the '*-debuginfo' rpm files installed for QT5 parts will also help get useful trap files.

 Are you running with '--single-process' enabled in Dooble settings? It seems to be much more stable (and faster) that way.


Hi David,

The path is not C:\var\log\app
Installed all QT5 debuginfo rpm package
Installed QT5 multimedia as well sockets

Tried dooble but it failed just before end of page is loaded, no trap files  no *dooble*.txt not *.trp)
Tried dooble --single-process but it failed and no trap files
Tried sh -c dooble.exe and it failed without any message

What next to get debugging elements ?

Applications / Re: Test build of dooble with qt5
« on: May 09, 2022, 03:17:22 pm »
I Dooble compatible with ffturbo ? Open office quick start ?

always searching a way to be able to start Dooble without crahs and no one told me how to do to get the trap file when none is produced ?
No trap file available, no debug from what I understand... But no trap file generated no help to get one !

Where is otter browser ?

Pages: [1] 2 3 ... 35