Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - TeLLie

Pages: [1]
Programming / OPenchat
« on: September 29, 2023, 11:38:09 pm »
Hi all,

Did someone tried to run openchat under ArcaNoae
I just tried it and it traps inmidityl..

09-29-2023  23:32:08  SYS3184  PID 005a  TID 0001  Slot 008a
EAX=fffffff3  EBX=00000003  ECX=00000000  EDX=ffffffff
ESI=fffffff3  EDI=1abfe3f4
DS=0053  DSACC=d0f3  DSLIM=bfffffff
ES=0053  ESACC=d0f3  ESLIM=bfffffff
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=005b:000479c6  CSACC=d0df  CSLIM=bfffffff
SS:ESP=0053:000f86a0  SSACC=d0f3  SSLIM=bfffffff
EBP=000f8ff6  FLG=00010287

OPENCHAT-SMP.EXE 0003:000179c6

Applications / New Laptop
« on: August 05, 2023, 04:16:06 pm »
Hi all,

I'm just curious what new laptop runs with Arcanoae.
1. What cpu is has
2. How much ram is seeing bij Arcanoae
3. Have to have UEFI (For ArcanoaE 5.1)
4. And have a Ethernetport, as there is no Wireless one

The rest is not that important as i will use it only for compiling.

As i have now a:
CPU: GenuineIntel 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz
CPU Speed: 2435 Mhz
CPU Count: 4
  Memory below 1MB: 624.00 KiB
  Memory between 1MB and 4GB: 1063.50 MiB
  Memory below 4GB: 1066.56 MiB
  Memory above 4GB: 14.74 GiB
As you can see i have only 1MIB as free mem.
When compiling things i have to reboot several times as i get often OUT of MeM

I like to buy a Medion Erazer Crawler E30 MD62472 (30034264)
This have a I5-1250H and also 16gigs mem (Hope it sees more Mem then the older one, but cannot check till i buy it )

Regards, Elbert

Applications / Converseen
« on: February 18, 2023, 12:55:49 pm »
Hi all
For the brave ones, i ported converseen to OS2, see

I test a bit and converting works for the one i tested, png, jpg, tiff and from png to pdf.

I have include some new dll, please do not put them in you're path, but leave them in same dir as the exe so you have not dll hell :)

And its just for testing, to see if its working properly for us...

Best regards, Tellie

Hardware / Ryzen 7
« on: July 04, 2021, 11:49:30 am »
Hi all,
I plan to buy me a Acer Aspire 5 A515-44-R2FS (NX.HW1EH.002), 15.6" laptop

Will this run on Arcanoae?
And have any experience with a Ryzen

Thankz in advance ...

Applications / Tor
« on: September 20, 2020, 11:09:48 pm »
Hi All,
I try to get tor running with FF
I have set in FF the settings to manual proxy with and port 9050 and socks5

the i run tor and i see:
Sep 20 23:07:41.531 [notice] Tor running on OS/2 with Libevent 2.0.21-stable, OpenSSL 1.0.2t, Zlib 1.2.5, Liblzma 5.0.3, and Libzstd N/A.
Sep 20 23:07:41.537 [notice] Tor can't help you if you use it wrong! Learn how to be safe at
Sep 20 23:07:41.541 [notice] Configuration file "/tor/etc/tor/torrc" not present, using reasonable defaults.
Sep 20 23:07:41.549 [notice] Opening Socks listener on
Sep 20 23:07:41.553 [notice] Opened Socks listener on
Sep 20 23:07:41.000 [notice] Bootstrapped 0% (starting): Starting
Sep 20 23:07:42.000 [notice] Starting with guard context "default"
Sep 20 23:07:43.000 [notice] Bootstrapped 5% (conn): Connecting to a relay
Sep 20 23:07:43.000 [notice] Bootstrapped 10% (conn_done): Connected to a relay
Sep 20 23:07:43.000 [notice] Bootstrapped 14% (handshake): Handshaking with a relay
Sep 20 23:07:43.000 [notice] Bootstrapped 15% (handshake_done): Handshake with a relay done
Sep 20 23:07:43.000 [notice] Bootstrapped 75% (enough_dirinfo): Loaded enough directory info to build circuits
Sep 20 23:07:43.000 [notice] Bootstrapped 90% (ap_handshake_done): Handshake finished with a relay to build circuits
Sep 20 23:07:43.000 [notice] Bootstrapped 95% (circuit_create): Establishing a Tor circuit
Sep 20 23:07:43.000 [notice] Bootstrapped 100% (done): Done

But when i go to a page it wont load it, what do i wrong or do i miss a setting?

Applications / Rpm software for testing
« on: September 23, 2018, 02:58:11 pm »
Hi all,
I made some rpm packages from all ready ported  and some new software...
But i din't test them if they working like it should.
So look @ and see...
If there are probs or any other .... please let me know, 

Ps, so far only for I686 and some noarch

Applications / New QTpy from BWW Bitwise
« on: June 23, 2016, 12:08:02 am »
Hi All,

I played around with the new Pyqt and tried to starts some programma's
And i have started several, for some i had to install some dependencies and had to build myself, and with BIG help from Silvan from  bww bitwise works GmbH

So if you wanted to see more apps like this, we need to support  bww bitwise works GmbH for there good work.

 Regards, Tellie

Programming / Error with Vbox
« on: November 08, 2015, 11:00:50 am »
Hi all

I have setup Vbox in  Win10 and running Ecs beta 2.2
But i get now for the 4 time a error when i startup the Ecs VB
Read it as i installed Ecs 4 times and after  a restart i get this...

    The system detected an internal processing error at
    location ##1800:05b5 - 0003:05b5
    65535, 9051
    JFSBOOT: Error reading in FS
    Inental revision 14.106_SMP
    The system is stopped. Record all of the above information and
    contact your service representative.

Hardware / New Computer
« on: January 13, 2015, 10:04:10 pm »
Hello All,

It's time for a new computer :)
So i wanne buy this one, any have remarks on this or have bad experiences please let me know .

The mainboard have:
Supports Gigabit LAN by Realtek® RTL8111G
Chipset integrated by Realtek® ALC887

 1 x VGA port, supporting a maximum resolution of 1920x1200 @ 60Hz, 24bpp
• 1 x DVI-D port, supporting a maximum resolution of 2560x1600@60Hz, 24bpp/ 1920x1200 @ 60Hz, 24bpp
• 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz, 36bpp*/ 3840x2160@30Hz, 36bpp*/ 1920x1200@120Hz, 36bpp and 1920x1200@60Hz, 36bpp

Mainboard is a:          MSI A88XM-E35
Processor is a:           Amd A8-7600
Cooler is a:                 Deepcool GAMMAXX S40
Memory:                     G Skills RipjawsX 8GB DDR3-2133 cl11 kit
SDD HD is a :            Crucial MX100 256GB
HD is a:                       WD Digital Green 2TB
Dvdplayer is a:           LG GH24NS95
Casing is a:                Coolermaster N200
PSU is a:                     Be Quit!  Systempower 7 400W
Monitor is a:                AOC M2879VQ

so wanne also know if all works on OS/2 as i can change hardware if that would be better.

Applications / QtBitcoinTrader
« on: November 20, 2014, 09:52:06 pm »
Hello all,

I ported QtBitcoinTrader
As i don't have any bitcoin around, i wonder if some would test this and see if this from any use for OS2.

Drop me a note @ elbertdotpol@gmaildotcom (replace dot with a . )

Pages: [1]