OS2 World Community Forum

OS/2, eCS & ArcaOS - Technical => Applications => Topic started by: Remy on March 03, 2022, 11:42:22 pm

Title: AVxCAT (v2 into test)
Post by: Remy on March 03, 2022, 11:42:22 pm
Hi,

AVxCAT v2 has progressed
Many planned updates and new functions are now available (only 3 to 4 new options/changes aren't fully enabled yet)
I need more feedbacks about (not finalized) current beta. (ini file is maintained compatible with older release despite new entries are added)

To not overwrite current AVxCAT, this one is named avxcat_beta (dll is updated and backward compatible) 
The AVxCAT guide isn't updated yet and will be done next but I've added a long list about major functions and minor changes as well all corrected bugs including some rare crashes some had in specific situation...

To go to this beta level, have AVxCAT installed.
Check having new requirements installed
Use FFMPEG > v4 (I used V4.2.2 for my tests) to enabled all new functions
- Recording ice cast or other... (e.g. icecast-yp.internet-radio (dot) com ; directory.shoutcast (dot) com ...)
   Record time can be adjusted (Stream limit [time] options under parameters)
- You can record webcam (webcam.exe required - You can start webcan with option from under AVxCAT and up to 2 webcams devices selectable)
   you have the option to enable ffplay at link add into AVxCAT which provides you a small video window about current webcam recording
   an option to send udp webcam output available too...
   https://www.os2world.com/cms/index.php/past-news/80-news/software/23231-uvc-webcam-server-1-0 (https://www.os2world.com/cms/index.php/past-news/80-news/software/23231-uvc-webcam-server-1-0)
- You can start webcam and just see the video from it
   You ca start/stop playing some type of "files"
- CD grabbing with cddb improved with autoget front cover id enabled (webc under parameters)
   CD grab output organisation can be selected through the [ + ] available button under parameters
   CD HQ extract (including n recoveries in case of read errors) option added
   ...
- Audio muxing or append (in muxing mode, first entry can be volume lowered)
...

To test it and provide feedbacks:
http://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_new.zip (http://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_new.zip)

Regards
Remy
     
Title: Re: AVxCAT (v2 into test)
Post by: Mentore on March 07, 2022, 08:41:50 am
Hi,

AVxCAT v2 has progressed
Many planned updates and new functions are now available (only 3 to 4 new options/changes aren't fully enabled yet)
I need more feedbacks about (not finalized) current beta. (ini file is maintained compatible with older release despite new entries are added)

Regards
Remy
   

Hello Remy,
I tried to download it but got a strange error. The downloaded file was only 3 kB long.

Don't know if  I made a mistake and tried to download something else but still.

Mentore
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 07, 2022, 11:56:58 pm
Hi,

AVxCAT v2 has progressed
Many planned updates and new functions are now available (only 3 to 4 new options/changes aren't fully enabled yet)
I need more feedbacks about (not finalized) current beta. (ini file is maintained compatible with older release despite new entries are added)

Regards
Remy
   

Hello Remy,
I tried to download it but got a strange error. The downloaded file was only 3 kB long.

Don't know if  I made a mistake and tried to download something else but still.

Mentore

Hi,
Strange, the file  AVXCAT_new.zip  is near 344KB
what's your small downloaded file name ?

( https works too - https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_new.zip (https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_new.zip) )
 
How did you download it (from AVxCAT menu or using previous direct link) ?
- If from the menu, which Curl build do you have ?
- It uses two step, 1/ get information of available build on my site & 2/ if newer, download it ...
  do you have a home path (set home=) ?     

Regards
Rémy
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 08, 2022, 09:15:38 pm
To stream webcam audio+video network using udp...
Once you added the webcam, add the udp: information on the target path and then start.... (use parm ?pkt_size=1316 to have it working with VLC)
 
Title: Re: AVxCAT (v2 into test)
Post by: David Graser on March 09, 2022, 04:16:03 pm
I downloaded file without a problem.

I execute the .exe  and the first pic shows what happens.  This has happen with earlier versions.  I just stopped it and ran the .exe again and it would work.  Not this time..

I get the second message and then nothing happens.

Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 09, 2022, 10:03:51 pm
I downloaded file without a problem.

I execute the .exe  and the first pic shows what happens.  This has happen with earlier versions.  I just stopped it and ran the .exe again and it would work.  Not this time..

I get the second message and then nothing happens.

Thanks,
verifying and let you know
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 09, 2022, 11:14:53 pm
I downloaded file without a problem.

I execute the .exe  and the first pic shows what happens.  This has happen with earlier versions.  I just stopped it and ran the .exe again and it would work.  Not this time..

I get the second message and then nothing happens.

This code is executed during initial installation without ini file and after opening parameters + clic on webc checkbox
The messages are from webc dialog (but it could be displaied if an error occured before - making me modify a/)

I checked under my system but didn't get the error after removing my ini file and starting a fresh install.
I checked the code and changed 2 lines
a/ one which could set an invalid option if a specified path doesn't exist (cdda2wav)
B/ I forgot to refresh a var under webc dialog centering the dialog (corrected to refresh this var as it should be)
  If this var got dropped, a crash could occur (had this under an other dialog in an older version)   

Can you please get the update and give it a try ? thanks
(same file name)

Regards
Rémy

Title: Re: AVxCAT (v2 into test)
Post by: David Graser on March 10, 2022, 07:04:19 pm
Hi Remy

I must apologize.  I found what I did wrong.  I failed to copy the files over the previous install which had used Warpin.  Once I did that, everything appears to work great.   There were more files I required that were not included with the previous install. Thanks for all you hard work..

David
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 10, 2022, 09:29:44 pm
Hi Remy

I must apologize.  I found what I did wrong.  I failed to copy the files over the previous install which had used Warpin.  Once I did that, everything appears to work great.   There were more files I required that were not included with the previous install. Thanks for all you hard work..

David

Hi David,
GA will be Warpin.

Thanks for your update
Rémy
Title: Re: AVxCAT (v2 into test)
Post by: Remy on April 12, 2022, 11:50:11 am
Update available:

Added m3u list sorted by write date/time option
default = track names, if prefixed by track number, it is right but if not préfixed by track numbers, default sort may not provide expected result. With sort m3u by wtime, older on top, grab order is respected (sort limited by dir date/time precision)

Option available under: "CD output path" parameters Menu -> [  +  ]

Regards
Rémy
Title: Re: AVxCAT (v2 into test)
Post by: Remy on May 30, 2022, 06:41:11 pm
New update available (get update)

- several corrected bugs
- enabled video concat with/without gap files
- more...

Added a > in front of latest main changes in the text file included in the zip file.

* One main process was re-written to easier update/upgrade my code and a few optimized codes)
Title: Re: AVxCAT (v2 into test)
Post by: Remy on January 15, 2023, 05:54:25 pm
New beta build update available (near GA level - this is only an update to latest beta with last updated files. GA will include a new PDF users guide)

Use the update function from under AVxCAT help menu
Or for those not having tried the V2
[https://remydodin.levillage.org/en/realisations.php?item=6900&id=realisations]


note: following main updates since last build, some video bugs are corrected as well the start/stop audio/video files from the main process list and more.... (updated position of user program to run during conversion process in the full process like as it is  expected to be)

Can be used to stream webcam udp flow.     
Title: Re: AVxCAT (v2 into test)
Post by: Remy on February 06, 2023, 01:08:25 am
AVxCAT V2 GA (preview) 
(installation corrections, other corrections, some code reworked, new features etc...)
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_1.wpi
PDF updated
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_V2.pdf

feedback and experiences welcome

note: David Graser reported issue found and should be resolved
Title: Re: AVxCAT (v2 prev)
Post by: Remy on February 06, 2023, 01:14:23 am
Hi Remy

I must apologize.  I found what I did wrong.  I failed to copy the files over the previous install which had used Warpin.  Once I did that, everything appears to work great.   There were more files I required that were not included with the previous install. Thanks for all you hard work..

David

Copying over previous build corrected it of course.
I found what's wrong into my code at first install and only in specific cases using specific display size (a negative value was calculated resulting into invalid code. Resolved)
Title: Re: AVxCAT (v2 into test)
Post by: roberto on February 07, 2023, 05:44:33 pm
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos
Title: Re: AVxCAT (v2 into test)
Post by: Remy on February 07, 2023, 11:19:14 pm
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos

Thanks Roberto, I'll check what's happening
Title: Re: AVxCAT (v2 into test)
Post by: Remy on February 08, 2023, 01:58:38 am
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos

Hi Roberto,

Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

Link refreshed (get the file again if already downloaded)

wpi updated too..
Title: Re: AVxCAT (v2 into test)
Post by: roberto on February 08, 2023, 03:57:34 pm
Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip
Thank you, it's ok.
saludos
Title: Re: AVxCAT (v2 into test)
Post by: Andy Willis on February 17, 2023, 05:28:04 am
I found a problem in the voix that I built that is currently packaged with AVxCAT, I fixed and rebuilt it.

P.S.
Martin, I only just noticed the OS2World github of voix, I had made updates to it several years ago to be able to be used in AVxCAT, these are at:
https://github.com/abwillis/voix
if you are interested in pulling in the changes.
Title: Re: AVxCAT (v2 into test)
Post by: Mentore on February 17, 2023, 08:15:20 am
IIRC the first port of Voix was mine. I'm glad to see that someone improved it.
Thanks Andy.

Mentore
Title: Re: AVxCAT (v2 into test)
Post by: Remy on February 17, 2023, 08:35:18 pm
I found a problem in the voix that I built that is currently packaged with AVxCAT, I fixed and rebuilt it.

P.S.
Martin, I only just noticed the OS2World github of voix, I had made updates to it several years ago to be able to be used in AVxCAT, these are at:
https://github.com/abwillis/voix
if you are interested in pulling in the changes.

Thanks Andy  ;)

I updated both links (zip and wpi) with updated AVxCAT
PDF updated too.

For WPS into local codepage, rexxuni required
Title: Re: AVxCAT (v2 into test)
Post by: Martin Iturbide on February 18, 2023, 02:32:12 am
P.S.
Martin, I only just noticed the OS2World github of voix, I had made updates to it several years ago to be able to be used in AVxCAT, these are at:
https://github.com/abwillis/voix
if you are interested in pulling in the changes.

Thanks Andy, it is done. Not sure if I did it in the most elegant way, but I have your changes here: https://github.com/OS2World/MM-SOUND-Voix

Regards
Title: Re: AVxCAT (v2 into test)
Post by: Andy Willis on February 18, 2023, 05:07:43 am
IIRC the first port of Voix was mine. I'm glad to see that someone improved it.
Thanks Andy.

Mentore

It was my understanding that you initially ported it... to which end, I had added the credit in the readme.md file when I setup the repository. I merely added the ability for stdin/stdout support so that AVxCAT could pipe in and out.
Title: Re: AVxCAT (v2 into test)
Post by: mauro on February 26, 2023, 07:23:55 pm
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos


Hi Roberto,

Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

Link refreshed (get the file again if already downloaded)

wpi updated too..

Hi Remy, I had the old avxcat 1.5.4.1 on my Virtualbox vm, warp 4.52 guest, well running.
After read the post about the latest v2 wpi package, I downloaded and replaced the previous version, and after that also placed the new avxcat.EXE (in C:\APPS\AVXCAT\) as described to correct the initial issue occourred to Roberto.
But no luck, it gives error warnings both in the initial installation and in the new executable running.
First appears an auto-scrolling drRex window -see avxcat 2 err 1.jpg image- getting to over line 22000 and then desappearing.
After that appears the system error message, see avxcat 2 err 2.jpg image.
Can you catch a cause for the issue by my indications or maybe there's a log I can retrive to be more specific?
Thank you

Title: Re: AVxCAT (v2 into test)
Post by: Remy on February 27, 2023, 02:13:19 pm
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos


Hi Roberto,

Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

Link refreshed (get the file again if already downloaded)

wpi updated too..

Hi Remy, I had the old avxcat 1.5.4.1 on my Virtualbox vm, warp 4.52 guest, well running.
After read the post about the latest v2 wpi package, I downloaded and replaced the previous version, and after that also placed the new avxcat.EXE (in C:\APPS\AVXCAT\) as described to correct the initial issue occourred to Roberto.
But no luck, it gives error warnings both in the initial installation and in the new executable running.
First appears an auto-scrolling drRex window -see avxcat 2 err 1.jpg image- getting to over line 22000 and then desappearing.
After that appears the system error message, see avxcat 2 err 2.jpg image.
Can you catch a cause for the issue by my indications or maybe there's a log I can retrive to be more specific?
Thank you

Hi!

From the drrexx dialog, it looks that an initial call (I suppose to a loaded proc from dll) couldn't be satisfied and then, you've got all lines displaied into this dialog.
Do you have the new dll provided by AVxCAT v2 or did ou left the older one ?     
At which date did you download the package ?
Please, get the package again, no need to install the other zip file package (same level)
As well, what is the bldlevel of AVxCAT.exe ?

Thanks
Remy
Title: Re: AVxCAT (v2 into test)
Post by: mauro on February 27, 2023, 06:57:00 pm

Hi!

From the drrexx dialog, it looks that an initial call (I suppose to a loaded proc from dll) couldn't be satisfied and then, you've got all lines displaied into this dialog.
Do you have the new dll provided by AVxCAT v2 or did ou left the older one ?     
At which date did you download the package ?
Please, get the package again, no need to install the other zip file package (same level)
As well, what is the bldlevel of AVxCAT.exe ?

Thanks
Remy

Thanks for replying Remy. To begin again from a clean situation, I deinstalled the 1.5.4.1 version by WarpIn uninstaller routine.
Then I installed the wpi package
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_1.wpi
You said no need to add-replace anything behind this, and it already gives the described issue when try to run it first time.
"Do you have the new dll provided by AVxCAT v2 or did ou left the older one " means I should separately provide-modify something after such installation? Maybe that could be the point.
As said previously, later this I also tried to copy both the avxcat_rep.zip content first, and then avxcat_new.zip content in the avxcat working directory (overwriting the same name files), each time attempting to run it again with no changes.

Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.1#@##1## 17 Feb 2023 19:36:20     ARCAOS-000
::::0.1::00017@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.1
Date/Time:       17 Feb 2023 19:36:20
Build Machine:   ARCAOS-000
FixPak Version:  00017
File Version:    2.0
Description:     GA build'
Title: Re: AVxCAT (v2 into test)
Post by: Remy on February 28, 2023, 10:14:20 am

Hi!

From the drrexx dialog, it looks that an initial call (I suppose to a loaded proc from dll) couldn't be satisfied and then, you've got all lines displaied into this dialog.
Do you have the new dll provided by AVxCAT v2 or did ou left the older one ?     
At which date did you download the package ?
Please, get the package again, no need to install the other zip file package (same level)
As well, what is the bldlevel of AVxCAT.exe ?

Thanks
Remy

Thanks for replying Remy. To begin again from a clean situation, I deinstalled the 1.5.4.1 version by WarpIn uninstaller routine.
Then I installed the wpi package
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_1.wpi
You said no need to add-replace anything behind this, and it already gives the described issue when try to run it first time.
"Do you have the new dll provided by AVxCAT v2 or did ou left the older one " means I should separately provide-modify something after such installation? Maybe that could be the point.
As said previously, later this I also tried to copy both the avxcat_rep.zip content first, and then avxcat_new.zip content in the avxcat working directory (overwriting the same name files), each time attempting to run it again with no changes.

Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.1#@##1## 17 Feb 2023 19:36:20     ARCAOS-000
::::0.1::00017@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.1
Date/Time:       17 Feb 2023 19:36:20
Build Machine:   ARCAOS-000
FixPak Version:  00017
File Version:    2.0
Description:     GA build'

Latest build is installed.
May I suggest you following action please:
Rename AVxCAT.ini file from under C:\OS2 if you have it there (it should remain from V1) to AVxCAT.in_ and than, start AVxCAT again. If it works than redo the customization and send me your AVxCAT.in_ (older ini file) using my web site email link.
Regards

Updt: What is your screen size ?  (>= 1024x768 mini)
Title: Re: AVxCAT (v2 into test)
Post by: mauro on February 28, 2023, 05:30:22 pm



Latest build is installed.
May I suggest you following action please:
Rename AVxCAT.ini file from under C:\OS2 if you have it there (it should remain from V1) to AVxCAT.in_ and than, start AVxCAT again. If it works than redo the customization and send me your AVxCAT.in_ (older ini file) using my web site email link.
Regards

renamed AVXCAT.INI as indicated, no better change obtained, the further attempt to start the program just failed with same error described before.
After that, no other AVXCAT.INI has been created in the system. Anyway I posted the file attached to your email but am receiving back a notification of non-valid email address. Should I post it here?

Quote
Updt: What is your screen size ?  (>= 1024x768 mini)


1152 x 660 . It's a Virtualbox guest session window resized to fit inside my host window
Title: Re: AVxCAT (v2 into test)
Post by: Remy on February 28, 2023, 08:34:20 pm



Latest build is installed.
May I suggest you following action please:
Rename AVxCAT.ini file from under C:\OS2 if you have it there (it should remain from V1) to AVxCAT.in_ and than, start AVxCAT again. If it works than redo the customization and send me your AVxCAT.in_ (older ini file) using my web site email link.
Regards

renamed AVXCAT.INI as indicated, no better change obtained, the further attempt to start the program just failed with same error described before.
After that, no other AVXCAT.INI has been created in the system. Anyway I posted the file attached to your email but am receiving back a notification of non-valid email address. Should I post it here?

Quote
Updt: What is your screen size ?  (>= 1024x768 mini)


1152 x 660 . It's a Virtualbox guest session window resized to fit inside my host window


What is this screen format ? Shouldn't it be 1152 x 864 ?
About my email address, please add a dot betweenn r and d

This isn't in the required screen size value but should work.
I just forced the screen size of virtualbox to your specification and than, I installed AVxCAT from the wpi and it well start ! not crash.

I found your problem, it is with rxutilex.dll, you don't have it into your libpath.
Your system is warp 4.5.2 (it differs from AN or eCS.
Please add the rxutilex.dll from under AVxCAT\Dlls and put it into a libpath and then, reboot you OS/2.
It should start

I'm going to check why it produces this error while it should not and add a correction and than update this post as soon it is corrected for this rxutilex.dll not loaded issue

Regards
Rémy
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 01, 2023, 07:20:40 pm
Hi mauro !

It should be resolved yet (no more need to add the dll into your libpath)
You can rename your saved avxcat.in_ to *.ini  (if not done yet, of course)
Install new WPI package only.
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_3.wpi

Regards
Rémy
Title: Re: AVxCAT (v2 into test)
Post by: mauro on March 01, 2023, 08:09:14 pm
Hi mauro !

It should be resolved yet (no more need to add the dll into your libpath)
You can rename your saved avxcat.in_ to *.ini  (if not done yet, of course)
Install new WPI package only.
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_3.wpi

Regards
Rémy
Ok deinstalled previous and installed this one, also placed AVXCAT.INI in its original position. Now I've a DrRexx window error message as shown in the image, it is just a short text advice, no lines running-scrolling as before, ad then the specific 3175 system error warning after closing the DrRexx alert.

For what related to the screen format, I can select in the System Setup -see image- and that resolution selection has been specifically created by my need applying the VirtualBox Manager commandline to set a non-standard resolution, possible after the OS2 Virtualbox Guest Additions
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 02, 2023, 02:52:07 pm
Ok,

Most issue you have are due missing required dlls.
The problem is that RXFUNCQUERY() returns 1 if function isn't registered and 0 if it is.
If a new rxfuncquery is done after an add it returns 0 (if or if no dll available) and when the dll isn't present, the dllfunction call fail !

To be more verbose about missing dlls and not crash:
I updated AVxCAT and added a check into libpath + avxcat\dll path (this one is installed by package 2) and issue a message telling which required dlls are missing to start AVxCAT followed by an exit. I updated information about loaded dll and dll path into the Extra logs view. (menu view).

Package 2 from WPI updated too.

I just refreshed the 2.0.0.3 wpi link with the updates (02.03.2023)
Please, get the refreshed link

Regards
Rémy
Title: Re: AVxCAT (v2 into test)
Post by: mauro on March 02, 2023, 08:51:38 pm
Ok,

Most issue you have are due missing required dlls.
The problem is that RXFUNCQUERY() returns 1 if function isn't registered and 0 if it is.
If a new rxfuncquery is done after an add it returns 0 (if or if no dll available) and when the dll isn't present, the dllfunction call fail !

To be more verbose about missing dlls and not crash:
I updated AVxCAT and added a check into libpath + avxcat\dll path (this one is installed by package 2) and issue a message telling which required dlls are missing to start AVxCAT followed by an exit. I updated information about loaded dll and dll path into the Extra logs view. (menu view).

Package 2 from WPI updated too.

I just refreshed the 2.0.0.3 wpi link with the updates (02.03.2023)
Please, get the refreshed link

Regards
Rémy

it runs now!
Thank you for your assistance
Title: Re: AVxCAT (v2 into test)
Post by: TeLLie on March 02, 2023, 09:38:55 pm
Hi Remi

I dont get it to start here.
I run the latest wpi, as it mention i had some dll messing, but after install them i had no complains.
But when starting it i only see error sin drrexx dialog, i cannot read them even not copy them as its going to fast to see :(

I only see this in popup.log

03-02-2023  21:29:57  SYS3175  PID 0062  TID 0002  Slot 00ad
H:\PROGRAMS\AVXCAT\AVXCAT.EXE
c0000005
00005f6b
P1=00000001  P2=00005f6b  P3=XXXXXXXX  P4=XXXXXXXX
EAX=00000000  EBX=00000000  ECX=00060078  EDX=015d3d50
ESI=00000000  EDI=00000000
DS=0053  DSACC=d0f3  DSLIM=bfffffff
ES=0053  ESACC=d0f3  ESLIM=bfffffff
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=005b:00005f6b  CSACC=d0df  CSLIM=bfffffff
SS:ESP=0053:015d3fd0  SSACC=d0f3  SSLIM=bfffffff
EBP=726f773b  FLG=00010246

H:\Programs\AVXCAT>bldlevel avxcat.EXE
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.3#@##1## 2 Mar 2023 14:32:41      ARCAOS-000::::0.3::00001@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.3
Date/Time:       2 Mar 2023 14:32:41
Build Machine:   ARCAOS-000
FixPak Version:  00001
File Version:    2.0
Description:     GA build'

Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 02, 2023, 11:13:27 pm
Hi TeLLie,

The package you downloaded was just before the refresh !
The correct bldlevel:
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.3#@##1## 2 Mar 2023 18:14:32      ARCAOS-000
::::0.3::00003@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.3
Date/Time:       2 Mar 2023 18:14:32
Build Machine:   ARCAOS-000
FixPak Version:  00003
File Version:    2.0
Description:     GA build'

 ***********************

"I run the latest wpi, as it mention i had some dll messing, but after install them i had no complains.
But when starting it i only see error sin drrexx dialog"

You wrote not having complains after installing dlls.
Did you install package 2 ?
If no complain, i suppose avxcat was up or no and just drrexx window?

Can you please install package 2
(you shouldn't have complain about missing dlls if this one was installed with avxcat)

What's your OS (os/2, eComstation or ArcaOS)

Regards,
Remy

Please run from a command line:
avxcat --debug98

Please use my email link on my website and add a "dot" between "r" and "d" into the userid 

Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 03, 2023, 12:07:58 pm
The correction about dlls was introduced with fixpack 00003
.
I review my code and find a possible (in a very specific case) crash during conversion.
I corrected this, updated a few comments into extra logs view dialog and removed a older left trace entry.
I just refreshed the same wpi package at this time.

bldlevel is now:
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.3#@##1## 3 Mar 2023 11:55:05      ARCAOS-000
::::0.3::00004@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.3
Date/Time:       3 Mar 2023 11:55:05
Build Machine:   ARCAOS-000
FixPak Version:  00004
File Version:    2.0
Description:     GA build'

Please TeLLie, get the refreshed V2.0.0.3 WPI and tell me how it works now for you.
Thanks

Regards
Rémy

note: fixpack 00005   
Title: Re: AVxCAT (v2 into test)
Post by: TeLLie on March 03, 2023, 08:13:23 pm
Hi Remy

I installed the latest wpi and now all is working...

Thankz for this nice piece of OS2 software :)

Kind regards, TeLLie

I use Arcanoae ...
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 07, 2023, 06:47:49 pm
For current V2 ->  now V2.0.0.4
A few corrections ( e.g.  regression on metadatas when grabbing CD code introduced on 25 feb 2023)   

avxcat_rep.zip (for the V2  exe replacement only)
https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

AVXCAT_S-2_0_0_4.wpi
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_4.wpi
Title: Re: AVxCAT (v2 into test)
Post by: Remy on March 15, 2023, 10:24:30 am
https://remydodin.levillage.org/en/realisations.php?item=6900&id=realisations

(Official GA on 2.0.0.4 including new pdf revision file)
Title: Re: AVxCAT (v2 into test)
Post by: Remy on August 28, 2023, 02:05:27 am
A fix was issued on AVxCAT 2.0.1.1 (fp1) - crash with vebcam

A zip preview AVxCAT V2.1.0 is available for test (must be installed above AVxCAT V2.0.1.x)
(please use write to author link from AVxCAT since I had to disable email link from my website due to bad contacts)

2.1.0.0  [ in test mode, available at request ] - new fix 11 (30082023)
         - New option to use Icon buttons for predefined profiles instead of dropdown list
         - Selected iconbutton profile is saved at AVxCAT file/exit
         - Possibility to customize iconbutton profile (use of external cfg file)
         - Added [X] "delete" option for user created profiles under [New profile] button
         - Added "Create folder(s)" & "delete folder" under internal filemanager called by [Chg] button for target folder
         - Added "M4A" alac
         - Added "MOV"
         - Added MD5 package used to autocheck downloaded updates (through AVxCAT menu)
         - New ffmpegca.dll
         - Optimized parameters when involving leech (USB CD-ROM, grabbing private CDs)
         - corrected: a wrong video profile
         - corrected: some video option may use incorrect video extension
         - corrected: hung could occure when cdd2wav reads a track having lot of jitter (changed a fixed parameter)
         - Somme minor corrections
         - changed a few webcam -> UDP initial settings
         - fix of webcam bug included

note: same location as wpi download but named "AVxCAT210-prev.zip"

info: window during webcam add (into main process list).
         To change some fields setting, click on updt (have webcam on), modify itsoffset to syncronize audio/video if needed
         ffplay checkbox is used with ffplay (ctrl) size used to display the stream video (only) to control recording or streaming.
         screenshots from v2.1.0

         Last screenshot is about downloaded update MD5 checksum error (I forced an error to get the message issued else no message)