Bus 2 (PCI Express), Device Number 0, Device Function 0 Vendor 10ECh Realtek Semiconductor Device 8136h Unknown Command 0007h (I/O Access, Memory Access, BusMaster) Status 0010h (Has Capabilities List, Fast Timing) Revision 05h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) Cache line size 32 Bytes (8 DWords) PCI Class Network, type Ethernet Subsystem ID 012310ECh Unknown Subsystem Vendor 10ECh Realtek Semiconductor Address 0 is an I/O Port : E800h..E8FFh Address 1 is not present or not configured! Address 2 is a Memory Address (64-bit, Prefetchable) : FAFFF000h..FAFFFFFFh Address 4 is a Memory Address (64-bit, Prefetchable) : FAFF8000h..FAFFBFFFh System IRQ 17, INT# A New Capabilities List Present: Power Management Capability, Version 1.2 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is enabled MSI function can generate 64-bit addresses PCI Express Capability, Version 2 Device/Port Type : PCI Express Endpoint Device Device Capabilities : Unsupported Request Severity is Fatal Device Status : Correctable Error Detected Unsupported Request Detected AUX Power Detected Link Capabilities : Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 0 Link Control : Asynchronous Clocking in Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x1 MSI-X Capability Vital Product Data Capability VPD Data not present