Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Andy Willis

Pages: 1 ... 13 14 [15] 16 17 ... 20
211
Applications / Re: Regina REXX vs. OS/2 REXX
« on: September 29, 2014, 07:32:13 pm »
Regina REXX is a Classic REXX not Object REXX... I can't speak to the compatibility nor if it has the integration that it has.  If Open Object REXX were ported and replaced Object REXX then Regina REXX might be able to be used in place of Classic REXX. 

212
Hardware / Re: eCS and 3 inch CD drives?
« on: September 26, 2014, 09:22:01 pm »
If these are the disks I am thinking of, they fit in the regular CD/DVD player.  I only ever had one of them many years ago but it read like any other CD but was just smaller.  In fact, if you look at a CD bay when it is out, there is often a smaller circular area that it would fit at.

213
Applications / Re: Audacity with Odin? Other usable Audio wav (mp3) Editor?
« on: September 25, 2014, 08:40:25 pm »
I believe there may have been reports of some version working with Odin many years ago but I don't have any idea what version, nor what version of Odin they were using at the time.
I find AVxCAT to be very useful.  It is a gui that wraps ffmpeg and several other tools.

214
Storage / Re: exFAT
« on: September 19, 2014, 07:52:16 pm »
The rumour I heard was that the OS/2 version of Object Rexx had been forked long before and that was the reason it was not included with the open source version.
I think they had been forked long before and the OS/2 portion was owned by a different IBM group who would not release it.  Back when all that was happening we had some REXXLA members attending Warpstock that were at least tangentially involved with the process.

215
Storage / Re: exFAT
« on: September 16, 2014, 10:24:56 pm »
What it will be great as a start is to have the eCS-OS2 implementation of JFS-boot complete open sourced. I asked that once to Mensys and they told me that the source code of it was provided in part by IBM, so they can not release it, which it seems odd since IBM released JFS as open source to be included on Linux, but who knows.
IBM did the same thing with Object REXX when they released it... they did not release the OS/2 code even though REXXLA tried to get them to do so at the time.

216
General Discussion / Re: Hobbes version handling
« on: September 10, 2014, 03:12:40 am »
Hi All

It used to be that hobbes required lowercase filenames but that was years ago.

Try searching for USBcfg on hobbes just to show that case is not an issue.

Having just tried the above search myself I see that the most recent release USBcfg082 (both .zip and .wpi versions) have gone missing - hobbes reports "No files found" when searching for USBcfg082.

I guess the hobbes administrator may have changed things again so that lowercase is now required but I doubt it. I suspect simple cockups by the current administrator to be more likely.

I have emailed the admin to ask what has happened to the USBcfg082 files and hope to get a reply.

In the meantime I guess I should re-upload the USBcfg082 files - and try to keep tabs on what happens to them.


Regards

Pete
USBcfg082, Usbcfg082, or usbcfg082 would be fine but the case of the zip and txt have to match as well as the case in the filename field in the text.  It is being run on *nix based system where the filesystem is case sensitive and the scripts used to move everything therefore will see a Zip as different from ZIP or zip for instance.  As I understand it, the scripts will check to make sure there is a txt file to match the archive file... if not then it deletes.  Assuming that is fine, it processes the txt file and looks at the filename and processes according to the information found in it.  If the case doesn't match there then it won't find the archive file to process and then it would be deleted.

217
Programming / Re: Simple C Programming Editor and File Manager for eCS ?
« on: September 10, 2014, 03:06:10 am »
Filestar is a well thought of File Manager:  http://jaread.net/software/
FM/2 is also well thought of:  http://hobbes.nmsu.edu/h-browse.php?dir=/pub/os2/util/browser
That link has many file managers, some mention being Norton Commander clones (those are all older but should work as well now as they ever did but I don't anything about them).
Larsen commander is the one I like but use the above two as well: http://hobbes.nmsu.edu/download/pub/os2/util/shell/lcmd1.07.02.zip

For editors:
Flex edit at the same site as Filestar, I haven't much experience with it.
QT based editors probably the best chance of having tabs (there are some I know have tabs but don't have line numbers)
http://trac.netlabs.org/qtapps/wiki/QT4%20Office   
http://trac.netlabs.org/qtapps/wiki/QT4%20Development
I used to always use ae.exe (likely what you are using as e.exe) as it had line numbers (have to turn off wrap) but it didn't have a goto line number.  I only stopped due to it rebooting my system, have several systems it is doing that on but haven't figured out why.
I now use NEPMD but it uses the Enhanced Editor as a base so probably still wouldn't work for you but in case it would change something so that it works:
http://trac.netlabs.org/nepmd
It doesn't have tabs but does have line numbers and can jump to line numbers.
efte that Dave mentioned I have used and it works well but haven't ever looked for jumping to a specific line number.

218
General Discussion / Re: Hobbes version handling
« on: September 09, 2014, 12:33:52 am »
uhm.. "HTMLWizard_src_1-60.ZIP " is also gone. I'm uploading it again.

Regards
As an example about the case sensitivity:
HTMLWizard_src_1-60.zip
HTMLWizard_src_1-60.txt
Archive Filename: HTMLWizard_src_1-60.ZIP

I believe even the ZIP vs zip will cause this to be deleted again.

219
General Discussion / Re: Hobbes version handling
« on: September 09, 2014, 12:29:51 am »
Hihi

I also upload some files to Hobbes, but it seems they disappeared also ??
Did you end up loading the same file with two version numbers with the second marked to replace the first?  If so then yes.
Otherwise, one thing that it could be is that the file system on hobbes is case sensitive.  If you had even a different case in the txt file from the way it was uploaded or if the case of the txt file differed from the uploaded file then it would also be deleted.
 

220
General Discussion / Hobbes version handling
« on: September 08, 2014, 10:12:55 pm »
I have seen some posts on this, so when I saw iniser had version 2.4 and 2.5 in the incoming I sent an email to the hobbes archiver address and this was the response:
If the file is replacing a file that is still in incoming, it will be deleted. You can only replace files that have already been handled.
Please re-upload the final version and I will push it through incoming.

So, if anyone uploads a file and then before the previous one is processed, wants to replace it with a newer one then either they need to wait till the first is processed, not mark to replace the previous version, or if possible rename the previous to add delete.me and not mark it to be replaced or it will be deleted as the 2.4 and 2.5 versions of iniser were.  I forwarded that exchange to Peter to make him aware the files were both deleted.

221
General Discussion / Re: Hobbes and Libraries.
« on: September 04, 2014, 05:47:26 pm »
Maybe I have a misconception. I define a  "Library" like both, the DLLs (Binaries) required to run applications and the tools (docs, source code samples) that helps developers to create applications easily with a set of pre-created and shared functions.
The DLLs are typically (but as you've probably seen not consistently) called runtimes rather than libraries.  Libraries are more typically the files used to build software and a runtime DLL may be required for applications built with them (though they can be built in statically and require a DLL).
I should also mention that not all DLLs are runtimes by this definition.

222
Setup & Installation / Re: How to get ride of HPFS386
« on: August 29, 2014, 08:31:09 pm »
Quote
set PROCESSES...
From my tests I saw PROCESSES was always set to the value of THREADS+1. With current THREADS=512 Theseus says QSV_MAXPROCESSES = 513.
I have:
THREADS = 512
PROCESSES = 256
and Theseus shows QSV_MAXPROCESSES = 256
here.

223
[C:\]usr\local490\gcc490

[C:\]make

Killed by SIGSEGV
pid=0x011b ppid=0x011a tid=0x0001 slot=0x0051 pri=0x0200 mc=0x00
C:\USR\BIN\MAKE.EXE
LIBC065 0:0005dfdc
cs:eip=005b:1de9dfdc      ss:esp=0053:0014f480      ebp=0014f498
 ds=0053      es=0053      fs=150b      gs=0000     efl=00010246
eax=00000047 ebx=00027c31 ecx=00027c67 edx=00027c47 edi=00027c31
Process dumping was disabled, use DUMPPROC / PROCDUMP to enable

GCC 4.9.0 is buggy as hell along with having enough changes that much code no longer compiles. And this before any weaknesses that may appear in porting to OS/2. Many are waiting for 4.9.1 or staying with previous version. At least that's the hearsay I've heard.
Personally I find Pauls build of 4.4.6 to be the most stable
For all that...  GCC may not necessarily be at issue.  The crash is in make.  Which make is being used? Or from whence did it come?

224
To Martin Iturbide:

* XWorkPlace.. As I remember, there was XFile WPS extender (XFolder + WarpEnhancer + XPager). and XWorkPlace was developed with the support of Serenity Systems. It was impossible develop this project without this investments. There was D-Day, there was collaboration with eCS developers, short terms to complete the project. This is the example of open sourced program ordered and supported by the commercial company.
XWorkPlace (XWP) existed prior to Serenity Systems having a contract with IBM.  It was originally XFolder but the name changed prior to Serenity Systems.  Serenity Systems did have work done on eWorkPlace (eWP) which some of that work likely did go back into the original (though much of it was removing features not considered stable from XWP).  I used to build XWorkPlace back before eCS came out, though I never made any enhancements to it.  One of the first things I did, in fact, once I installed eCS was to replace eWP with XWP. 
Now, I don't disagree in general that much of OpenSource software got where it did due to businesses paying programmers to update it but XWP is not a good example.

225
Applications / Re: Apache OpenOffice 4.1.1 RC3
« on: August 22, 2014, 09:31:54 pm »
I cheated... I renamed the directories under the Openoffice.org.3 folder (except program where I created a backup folder and moved the stuff to it as ooodoc.dll was in use) and put the stuff from Openoffice4 under it.  That left in place the program objects from the OpenOffice3 install and left the ooodoc.dll which does the associations in place as well.

Pages: 1 ... 13 14 [15] 16 17 ... 20