Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - roberto

Pages: 1 ... 38 39 [40] 41 42 ... 55
586
Applications / Re: Can I use a usb port as a com-port?
« on: January 28, 2017, 06:23:52 pm »
For a start you need USBCOM.SYS loaded with the other USB drivers. 
If you are right, the first thing is to include it in the config.sys with
DEVICE = c: \ OS2 \ BOOT \ USBCOM.SYS / V

thanks

587
Applications / Can I use a usb port as a com-port?
« on: January 28, 2017, 11:53:43 am »
The case is that I wanted to use a circuit board with 8 relays that has a usb connection.
And I was thinking of using it with the rxcom.dll with rexx.

Someone can tell me if I can or not? Or if I would have to install something to make it work.?
Thanks

588
Applications / Re: OpenOffice 4.1.3 Draw problem
« on: January 27, 2017, 08:18:33 am »
I do not have that problem with Apache oo 413.
But what I'm seeing is that different computers have different problems. In one it happens to me that every approximately one month, I disappear a unit. In that same pc, firefox and thunderbird, corrupt some files sqllite, Preventing the backup. I delete them and everything works fine, but only until they get corrupted again.And in other pc, other problems.
Saludos

589
Article Discussions / Re: What program for font preview
« on: January 22, 2017, 10:51:50 pm »
You can see too the program sample in Qt4, fontsampler.exe, you have the sample and source. Only can see one by one font, but only with push a key.
Saludos

590
Programming / Re: files (and directories) not showing up in WPS
« on: January 22, 2017, 03:46:24 pm »
I've had that problem too, but it was a whole disk drive. And solved the problem by turning it off and on.
Saludos

591
Programming / Re: Crash on Boot with JFS
« on: January 11, 2017, 09:31:54 am »
Any ideas on how to fix?

Format slow and ACPI-3.23.02 run better that others more new. In a Dell pc.
Saludos

592
Hardware / Re: USB drivers 10.213 released
« on: December 25, 2016, 11:22:41 am »
This usb driver, also solved another problem with the Xwplace, now I can select the option xview, which before could not.

593
Hardware / Re: USB drivers 10.213 released
« on: December 23, 2016, 05:01:04 pm »
This version works very well, even the first hang up that I had when running Wpfinder is no longer produced.

But the second hang, I can not say it's a hang now is very curious.
I will try to explain the second hang, I have three mice, one on the keyboard, another outside the keyboard, and another external usb.
I have three apications running on screen, wpfinder, top, commandcom.
I do not have driver for the wifi. But I can turn it off and on.

Bypassing the multipt.exe program:

A- The moment the folder is opened with Find Results - test.txt with the WIFI ON. All screens are blocked, and the usb mouse is also locked. The mouse on the keyboard can be moved. The wpfinder shows a plain folder icon, and does not show me the two files I should have found. In eas shows .CLASSINFO.
If I press crtl + alt + sup, it does nothing until I turn off the wifi, in this case it shows me and I can run the CAD program. But I can not recover the system.

B- With WIFI-OFF, when running wpfinder with save result, it locks just like before, it does not show me the correct result when I can not find the two files that I should find, but it shows me a folder with a magnifying glass. And in eas shows .CLASSINFO AND .LONGNAMES
When pressing crtl + alt + del, until I turn on the wifi, it does not show me the program cad, which is operative, but I can not recover the desktop.

Without undoing the multipt.exe program
The problem never reaches the wifi, but the same happens, except that the folders have a magnifying glass in both cases, and if frame save results appear empty, if only frame subfolders appear the two files found, but seconds later the graphics of the Processors to the maximum and it is blocked. Ctrl + alt + of unplug the usb mouse I plug it in and it shows the cad. A single restart option.

594
I have d:\usr\lib\jpge8.dll as part of libjpeg with 143416 2016/11/30, I am running Aoo4.1.2

595
Hardware / Re: Dell Inspiron (late 2015) 5000 series (AMD A8)
« on: December 20, 2016, 03:01:45 pm »
WARNING: Some devices could not be assigned an interrupt (out of range).
This can solved with any update of ACPI drivers.
 
Quote
r8161$ driver was not loaded

8169 <> 8161
You can check with this program the real driver installed :
pci.exe or PCI104VKA

596
Applications / Re: XWP (xWorkplace) v1.0.11 beta3 Comments
« on: December 16, 2016, 10:15:41 am »
After locate the problem in same qt programs.
I reinstal the system, xfix the inis and reinstall xwp1011.
And xwp1011 help me for locate the problem in *extended atribb* in error in qt programs and files.
I only detec 2 problems with xwp1011:
1- In restart the system. After install xwp1011, for restart the system I have to take the laptoop off for 10 to 20 minutes minimum before start again or the system hang in the start.
2- I can not select Xview as default. (I install xwp1011 in a clean system and the problem is the same)

Other coment:
The *find* and *save as* hang the system with and without xwp1011
I am run in laptoop with 3 mouse, one track mouse in keyboard,another path mouse, and other usb mouse.
 
And I made a test
Copy multipt.exe multipt-stop.exe
copy helpmsg.exe multipt.exe
and restart
(in this point all run perfect)
kill usbmon.exe

and *find* again with *save as* no fail!!

Conclusion the usbmon.exe have a problems with *find*.

597
Applications / Re: XWP (xWorkplace) v1.0.11 beta3 Comments
« on: December 14, 2016, 10:42:00 pm »
But I wanted to comment on another problem, which is that after starting the system and with all programs closed. If I execute using the WPS search function (right click on a folder/desktop and choose find)
If I search for a file.txt the name of the file no is important, in 5 partitions less that 30gb no have problems. But in other more big partition that have the unix-root in it. 255gb free 150gb. aproximate.
The graphics of the processors moves to the maximum, if I leave the system ends up hanging, but if I remove the usb-mouse and insert it again continuous. But forcing me to take out and re-enter the usb.
After deinstall this files the problem is solved
23:06:14.99 Done with package "netlabs.org\Qt4\SysTray\100\1\1\843"
23:06:14.99 Deinstalling package "netlabs.org\Qt4\SysTrayDLL\100\1\1\843"
23:06:15.05     Deleted file "C:\ecs\dll\xsystray.dll"
23:06:15.05     Removed package "netlabs.org\Qt4\SysTrayDLL\100\1\1\843" from the database
23:06:15.05 Done with package "netlabs.org\Qt4\SysTrayDLL\100\1\1\843"
23:06:15.05 WarpIN Database thread is exiting
23:06:38.06 WarpIN Database thread started
23:06:38.06 Deinstalling package "netlabs.org\Qt4\SysTray\100\1\1\843"
23:06:43.93     Deleted file "C:\ECS\SYSTEM\eWPS\plugins\xcenter\xsystray.dll"
23:06:43.93     Removed package "netlabs.org\Qt4\SysTray\100\1\1\843" from the database
Is it possible that as the dlls are duplicated, the error occurs?
In fact I remember that in some searches I showed two file shadows when there was only one.

598
Applications / Re: XWP (xWorkplace) v1.0.11 beta3 Comments
« on: December 09, 2016, 08:41:52 pm »
It happens to me that I can not dial as default -xview-
It could be that I have the corrupt in inis files.

But I wanted to comment on another problem, which is that after starting the system and with all programs closed. If I execute using the WPS search function (right click on a folder/desktop and choose find)
If I search for a file.txt the name of the file no is important, in 5 partitions less that 30gb no have problems. But in other more big partition that have the unix-root in it. 255gb free 150gb. aproximate.
The graphics of the processors moves to the maximum, if I leave the system ends up hanging, but if I remove the usb-mouse and insert it again continuous. But forcing me to take out and re-enter the usb.
But on another boot partition, without having xwp-v1011 installed, the problem is the same.
Does this happen to anyone else?

599
Applications / Re: OpenOffice install on Warp 4.52
« on: December 09, 2016, 09:19:38 am »
Well thanks Dave, someone should modify the readme including:
 libicu-legacy
All is ok now.

600
Applications / Re: OpenOffice install on Warp 4.52
« on: December 07, 2016, 03:03:32 pm »
I am instaling in ecs22b2 with AOO-4120-GA-base-es.wpi, and with this packs:
 libc libgcc1 libgcc-fwd openssl curl libjpeg libxslt libicu zlib libxml2 mmap pthread urpo libstdc++6 libstdc++
all are install ok.
and give me this error:
Return code : 2
Failing module: ICCUUC42
Any help?

Pages: 1 ... 38 39 [40] 41 42 ... 55