Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - TeLLie

Pages: [1]
1
Applications / Converseen
« on: February 18, 2023, 12:55:49 pm »
Hi all
For the brave ones, i ported converseen to OS2, see https://converseen.fasterland.net/

I test a bit and converting works for the one i tested, png, jpg, tiff and from png to pdf.

ftp://ftp.netlabs.org/pub/qtapps/converseen-0.9.11.0-os2.7z

I have include some new dll, please do not put them in you're path, but leave them in same dir as the exe so you have not dll hell :)

And its just for testing, to see if its working properly for us...

Best regards, Tellie

2
Hardware / Ryzen 7
« on: July 04, 2021, 11:49:30 am »
Hi all,
I plan to buy me a Acer Aspire 5 A515-44-R2FS (NX.HW1EH.002), 15.6" laptop

Will this run on Arcanoae?
And have any experience with a Ryzen

Thankz in advance ...

3
Applications / Tor
« on: September 20, 2020, 11:09:48 pm »
Hi All,
I try to get tor running with FF
I have set in FF the settings to manual proxy with 127.0.0.1 and port 9050 and socks5

the i run tor and i see:
F:\usr\bin>tor.exe
Sep 20 23:07:41.531 [notice] Tor 0.4.3.6 running on OS/2 with Libevent 2.0.21-stable, OpenSSL 1.0.2t, Zlib 1.2.5, Liblzma 5.0.3, and Libzstd N/A.
Sep 20 23:07:41.537 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning
Sep 20 23:07:41.541 [notice] Configuration file "/tor/etc/tor/torrc" not present, using reasonable defaults.
Sep 20 23:07:41.549 [notice] Opening Socks listener on 127.0.0.1:9050
Sep 20 23:07:41.553 [notice] Opened Socks listener on 127.0.0.1:9050
Sep 20 23:07:41.000 [notice] Bootstrapped 0% (starting): Starting
Sep 20 23:07:42.000 [notice] Starting with guard context "default"
Sep 20 23:07:43.000 [notice] Bootstrapped 5% (conn): Connecting to a relay
Sep 20 23:07:43.000 [notice] Bootstrapped 10% (conn_done): Connected to a relay
Sep 20 23:07:43.000 [notice] Bootstrapped 14% (handshake): Handshaking with a relay
Sep 20 23:07:43.000 [notice] Bootstrapped 15% (handshake_done): Handshake with a relay done
Sep 20 23:07:43.000 [notice] Bootstrapped 75% (enough_dirinfo): Loaded enough directory info to build circuits
Sep 20 23:07:43.000 [notice] Bootstrapped 90% (ap_handshake_done): Handshake finished with a relay to build circuits
Sep 20 23:07:43.000 [notice] Bootstrapped 95% (circuit_create): Establishing a Tor circuit
Sep 20 23:07:43.000 [notice] Bootstrapped 100% (done): Done

But when i go to a page it wont load it, what do i wrong or do i miss a setting?

4
Applications / Rpm software for testing
« on: September 23, 2018, 02:58:11 pm »
Hi all,
I made some rpm packages from all ready ported  and some new software...
But i din't test them if they working like it should.
So look @ https://tellie.stackstorage.com/s/8R8pF7hZ9fHPZhI and see...
If there are probs or any other .... please let me know, 

Ps, so far only for I686 and some noarch

5
Applications / New QTpy from BWW Bitwise
« on: June 23, 2016, 12:08:02 am »
Hi All,

I played around with the new Pyqt and tried to starts some programma's
And i have started several, for some i had to install some dependencies and had to build myself, and with BIG help from Silvan from  bww bitwise works GmbH

http://imagizer.imageshack.com/img921/1718/aVyw8I.png
http://imagizer.imageshack.com/img923/8422/MsGrG4.png
http://imagizer.imageshack.com/img922/1979/3AdfDc.png
http://imagizer.imageshack.com/img921/5089/PgYh6i.png
http://imagizer.imageshack.com/img924/4115/xS7iv6.png
http://imagizer.imageshack.com/img923/3650/ASNN7M.png

So if you wanted to see more apps like this, we need to support  bww bitwise works GmbH for there good work.


 Regards, Tellie

6
Programming / Error with Vbox
« on: November 08, 2015, 11:00:50 am »
Hi all

I have setup Vbox in  Win10 and running Ecs beta 2.2
But i get now for the 4 time a error when i startup the Ecs VB
Read it as i installed Ecs 4 times and after  a restart i get this...

    The system detected an internal processing error at
    location ##1800:05b5 - 0003:05b5
    65535, 9051
    JFSBOOT: Error reading in FS
    0a8606a9
    Inental revision 14.106_SMP
    The system is stopped. Record all of the above information and
    contact your service representative.

7
Hardware / New Computer
« on: January 13, 2015, 10:04:10 pm »
Hello All,

It's time for a new computer :)
So i wanne buy this one, any have remarks on this or have bad experiences please let me know .

The mainboard have:
Supports Gigabit LAN by Realtek® RTL8111G
Chipset integrated by Realtek® ALC887

 1 x VGA port, supporting a maximum resolution of 1920x1200 @ 60Hz, 24bpp
• 1 x DVI-D port, supporting a maximum resolution of 2560x1600@60Hz, 24bpp/ 1920x1200 @ 60Hz, 24bpp
• 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz, 36bpp*/ 3840x2160@30Hz, 36bpp*/ 1920x1200@120Hz, 36bpp and 1920x1200@60Hz, 36bpp


Mainboard is a:          MSI A88XM-E35
Processor is a:           Amd A8-7600
Cooler is a:                 Deepcool GAMMAXX S40
Memory:                     G Skills RipjawsX 8GB DDR3-2133 cl11 kit
SDD HD is a :            Crucial MX100 256GB
HD is a:                       WD Digital Green 2TB
Dvdplayer is a:           LG GH24NS95
Casing is a:                Coolermaster N200
PSU is a:                     Be Quit!  Systempower 7 400W
Monitor is a:                AOC M2879VQ

so wanne also know if all works on OS/2 as i can change hardware if that would be better.

8
Applications / QtBitcoinTrader
« on: November 20, 2014, 09:52:06 pm »
Hello all,

I ported QtBitcoinTrader
As i don't have any bitcoin around, i wonder if some would test this and see if this from any use for OS2.
See https://github.com/JulyIGHOR/QtBitcoinTrader

Drop me a note @ elbertdotpol@gmaildotcom (replace dot with a . )

Pages: [1]