Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mauro

Pages: [1] 2 3 ... 28
1
Utilities / Re: K File Wizard
« on: May 18, 2024, 07:33:08 pm »
Hi mauro

You can find kcrypto.dll in this package http://www.os2site.com/sw/internet/openssl/old/openssl-0.9.8o-os2knix-20100602-runtime.zip

Regards

Pete

Thank you Pete, that link takes to a 404 page, however I could download the openssl-0.9.8zh zip package from bauxite.sakura site and finally find the file there.

@Martin/Neil :  I get same issue reported in the picture when attempting to connect to a ftp site which I handle in other host system, only difference it does not hang when select utf-8 code , just give same alert of directory not found.

BTW, kfw.exe runs also if KCRYPTO.DLL is in /usr/lib directory  .

2
Utilities / Re: K File Wizard
« on: May 18, 2024, 12:00:03 pm »
In eComstation 2.1 x:\ecs\dll I found kcrypto.dll. Copied to ArcaOs x:\usr\local\lib and K File Wizard opens.

hi, any possibility you can share your kcrypto.dll here? I personally cannot find it from none of the mentioned software supposed to include it.
Thank you much

3
Utilities / Re: K File Wizard
« on: May 16, 2024, 08:00:39 am »
Hi

HobbesArchive is up here:
- http://hobbesarchive.com/Home/Download?path=/Hobbes/pub/os2/util/file/KFileWizard_1-1-0.zip

Regards

thank you Martin, the given URL on eCSoft2 site  https://hobbes.nmsu.edu/download/pub/os2/util/file/KFileWizard_1-1-0.zip was not accessible. Same for the OS2 OpenSSL by KO Myung-Hun which, then it can be installed as rpm package from netlabs rel repository, but as Mentore wrote here no KCRIPTO.dll present in it...

4
Utilities / Re: K File Wizard
« on: May 15, 2024, 08:14:53 pm »
thank you, kcrypto.dll will also be useful, but my question was for downloading KFW itself, as HobbesArchive site isn't accessible anymore

5
Utilities / Re: K File Wizard
« on: May 15, 2024, 03:51:24 pm »


I downloaded it from HobbesArchive

Hi Neil, any other download location available?
Thank you

6
Programming / Re: Xpdf v. 4.01
« on: April 05, 2024, 02:36:53 pm »
.............
SYS1804: The system cannot find the file PAPER1.

found no reference on the net about this missing file

Hi Mauro

Installed Packages
libpaper.pentium4
libpaper-devel.pentium4

Kind regards, Elbert

right, that did the trick ! Thank you much
regards

7
Programming / Re: Xpdf v. 4.01
« on: April 04, 2024, 07:20:18 pm »
trying it as command line:

mypdffile.pdf present in same working directory (bin) of xpdf.exe and other .exe

xpdf.exe mypdffile.pdf

SYS1804: The system cannot find the file PAPER1.

found no reference on the net about this missing file

8
Applications / Re: Test build of dooble with qt5
« on: March 26, 2024, 07:44:25 pm »
thank you much, did the same in november 2023 but lost this reference among the posts/reply

9
Applications / Re: Test build of dooble with qt5
« on: March 25, 2024, 10:20:06 am »
hi all, sorry if I ask something already written here somewhere as this is the 21th page of the thread and not much easy to retrieve a specific indication; since I'm following the results of Dooble QT5 updates which has a reliable behavior on my OS2 Warp4.52 VM , like to learn where can I find its latest version, better if in rpm.
Thank you much meantime for the effort spent in this task, which by my side confirm is giving useful results.

10
Hi, since it seems not clear how try to solve directly by fixing video driver side, it would then be the case trying to force the pointer not changing shape when pass onto the icon (that is the moment that the issue happens).
Does anybody knows how to ?
Thank you

11
Most probable reason for your issue is using an old BASEDEV=IBM1S506.ADD which had a small partition size limit. Later versions corrected this and Dani's driver always had no small drive limit

confirm this has fixed the issue in my case

12
not my case, desktop objects in DFSee 17 installation were correctly created on the desktop.
All I can say about is that I first provided the uninstallation of the previous version both by WarpIn and then deleting the DFSee directory in HOME:\TOOLS

13
Hi mauro

Copy danis506.add and daniatap.flt to [BootDrive]:\os2\boot

Open [BootDrive]:\config.sys and add the following 2 lines

BASEDEV=DANIS506.ADD /!BIOS
BASEDEV=DANIATAP.FLT

then REM the start of these lines if they exist

BASEDEV=IBM1S506.ADD
BASEDEV=IBMATAPI.FLT
BASEDEV=IBMIDECD.FLT

Save config.sys

Reboot

Test DFSee


Regards

Pete

Ok Pete, it has worked!  Now we know that DFSee 17 (guess other software as well) needs DANIS506.ADD and DANIATAP.FLT to replace IBM1S506.ADD and IBMATAPI.FLT .
Thank you much

14
It's a drop in replacement. Find your BASEDEV=IBM1S506.ADD, rem it and add a line right after BASEDEV=DANIS506.add along with any parameters that IBM1S506.ADD had.
I notice my config.sys has BASEDEV=DANIS506.ADD /!BIOS

ok, then it's only DANIS.506.ADD file to be placed in same directory where IBM1S506.ADD is ?
Do I ignore the other files in the decompressed directory?
Tks

15
Hi mauro,

One other thing you might try is to delete the DFSee partition then run xfix and or checkini with the parameters /C /H /T  Doing that will remove a lot of useless info from the ini files.

Hi Ivan, did everyting you wrote in this order:

-uninstalled previous DFsee by Warpin deinstaller
-deleted its previous working directory (C:/TOOLS)
-rebooted
-applied XFIX, removed all invalid entries and saved action on OS2.INI
-rebooted
-applied CHECKINI, went all at the end of items scanning and then confirmed end of session (is that what the way to apply the cleaning? No confirmation read about result)
-rebooted
-installed DFSee 17 free downloaded from ecsoft/2
-run DFSee 17
-SAME ERROR MESSAGE
-uninstalled DFSee 17 by Warpin deinstaller
-deleted its previous working directory (C:/TOOLS)
-rebooted
-downloaded DFSee 17 beta from https://www.dfsee.com/download/
-installed it
-run DFSee 17 beta
-SAME ERROR MESSAGE

I think have followed slavishly all necessary steps to accomplish this attempts.

Thank you

Pages: [1] 2 3 ... 28