Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Neil Waldhauer

Pages: [1] 2 3 ... 68
1
Networking / Re: Updated Samba Client
« on: February 03, 2024, 03:26:45 pm »
Network browsing is still not working, same as before.

Clarifying - is this with Arcamapper from 5.0 or 5.1? They use quite different approaches...

This is with ArcaOS 5.1. I didn't think to try the old ArcaMapper. I'll set one up and try it...

The old ArcaMapper is much like the new. Browsing fails with this message "Connecting to Magnesium failed (Error NT_STATUS_UNSUCCESSFUL)

I see the workgroup and computers, but not the shares. How do you enable browsing for a user?

2
Networking / Re: Updated Samba Client
« on: February 02, 2024, 04:27:10 pm »
I didn't detect any regressions on the server side. The latest build of smbd, samba-4.19.4-os2-20240202.zip, shares files here, just like the previous build. Network browsing is still not working, same as before.

3
Programming / Re: IBM APL2 for OS/2
« on: February 02, 2024, 02:56:43 am »
Some more photos of contents

4
Programming / Re: IBM APL2 for OS/2
« on: February 02, 2024, 02:46:15 am »
More pictures of the APL box and contents

5
Networking / Re: Samba Users and Groups
« on: January 29, 2024, 05:16:06 am »
With those two changes, I am now able to see files on the Samba Server v 4.19 from ArcaMapper on an ArcaOS 5.1 machine. I didn't do any stress or capability test yet. Thanks David, and thanks, Paul.

Code: [Select]
        server min protocol = NT1
        ntlm auth = Yes

Curiously, I cannot see those same shares in the ArcaMapper Network Browser. I added Workgroup to my smb.conf, and now I can see the machine, but not the shares. When I try to refresh the list of shares in the Network browser, the following lines appear in smb.log..192.168.46.22

Code: [Select]
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[HOMES]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[D]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[E]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[F]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[H]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[M]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[P]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[S]"
[2024/01/28 20:07:43.792000,  2] ../../source3/param/loadparm.c:2951(lp_do_section)
  Processing section "[Y]"

6
Networking / Re: Samba Users and Groups
« on: January 28, 2024, 04:40:16 pm »
I think my old tdb files may have been one problem solved. Now smbpasswd behaves better, but with a few messages. I'm still having some problems connecting,  though.

Code: [Select]
These are the results of smbpasswd test after deleting the private directory

{0}[f:\programs\samba] smbpasswd -a root
Unknown parameter encountered: "display charset"
Ignoring unknown parameter "display charset"
lpcfg_do_global_parameter: WARNING: The "null passwords" option is deprecated
New SMB password:
Retype new SMB password:
tdbsam_open: Converting version 0.0 database to version 4.0.
tdbsam_convert_backup: updated F:\MPTN\ETC/samba/private/passdb.tdb file.
tdb(F:\MPTN\ETC/samba/lock/winbindd_idmap.tdb): tdb_open_ex: could not open file
 F:\MPTN\ETC/samba/lock/winbindd_idmap.tdb: No such file or directory
Added user root.

{0}[f:\programs\samba] smbpasswd -a Warp30
Unknown parameter encountered: "display charset"
Ignoring unknown parameter "display charset"
lpcfg_do_global_parameter: WARNING: The "null passwords" option is deprecated
New SMB password:
Retype new SMB password:
Added user Warp30.

{0}[f:\programs\samba] smbpasswd -a User
Unknown parameter encountered: "display charset"
Ignoring unknown parameter "display charset"
lpcfg_do_global_parameter: WARNING: The "null passwords" option is deprecated
New SMB password:
Retype new SMB password:
Added user User.

{0}[f:\programs\samba] smbpasswd -a zonker
Unknown parameter encountered: "display charset"
Ignoring unknown parameter "display charset"
lpcfg_do_global_parameter: WARNING: The "null passwords" option is deprecated
New SMB password:
Retype new SMB password:
Added user zonker.

{0}[f:\programs\samba] smbpasswd -a -n guest
Unknown parameter encountered: "display charset"
Ignoring unknown parameter "display charset"
lpcfg_do_global_parameter: WARNING: The "null passwords" option is deprecated
Added user guest.

I started the servers, and no errors. I can't quite browswe from my other computer with arcamapper. A domain icon appears with my hostname, but no machines or shares.

If I try to connect, I get the following added to log\log.smbd..192.168.46.22

[2024/01/28 07:28:54.985000,  2] ../../libcli/auth/ntlm_check.c:480(ntlm_password_check)
  ntlm_password_check: NTLMv1 passwords NOT PERMITTED for user Warp30
[2024/01/28 07:28:54.989000,  2] ../../source3/auth/auth.c:353(auth_check_ntlm_password)
  check_ntlm_password:  Authentication for user [Warp30] -> [Warp30] FAILED with error NT_STATUS_WRONG_PASSWORD, authoritative=1
[2024/01/28 07:28:54.989000,  2] ../../auth/auth_log.c:858(log_authentication_event_human_readable)
  Auth: [SMB2,(NULL)] user [BEACH2]\[Warp30] at [Sun, 28 Jan 2024 07:28:54.989000 PST] with [NTLMv1] status [NT_STATUS_WRONG_PASSWORD] workstation [GARBOPEEP] remote host [ipv4:192.168.46.22:59146] mapped to [BEACH2]\[Warp30]. local host [ipv4:192.168.46.80:445]
  {"timestamp": "2024-01-28T07:28:54.989000", "type": "Authentication", "Authentication": {"version": {"major": 1, "minor": 3}, "eventId": 4625, "logonId": "0", "logonType": 3, "status": "NT_STATUS_WRONG_PASSWORD", "localAddress": "ipv4:192.168.46.80:445", "remoteAddress": "ipv4:192.168.46.22:59146", "serviceDescription": "SMB2", "authDescription": null, "clientDomain": "BEACH2", "clientAccount": "Warp30", "workstation": "GARBOPEEP", "becameAccount": null, "becameDomain": null, "becameSid": null, "mappedAccount": "Warp30", "mappedDomain": "BEACH2", "netlogonComputer": null, "netlogonTrustAccount": null, "netlogonNegotiateFlags": "0x00000000", "netlogonSecureChannelType": 0, "netlogonTrustAccountSid": null, "passwordType": "NTLMv1", "clientPolicyAccessCheck": null, "serverPolicyAccessCheck": null, "duration": 500000}}

There must be something I can add to smb.conf to permit less secure connections...

7
Networking / Re: Samba Users and Groups
« on: January 27, 2024, 08:13:39 pm »
With the various command files changed to forward slashes "/" in smb.conf, smbpasawd is now running once, then after that trapping.

After a few times trapping, smbpasswd ran without trapping, but smb, nmb and winbind all crash when started.




8
Programming / IBM APL2 for OS/2
« on: January 26, 2024, 01:48:27 am »
I recently obtained a copy of IBM APL2 for OS/2

The previous owner gave me a load of books, magazines and notes on APL. (see photos)

If any APL enthusiast wants these, let me know. I'm in the Santa Cruz, California.


9
Networking / Re: Samba Users and Groups
« on: January 25, 2024, 05:12:02 pm »
In my smb.conf, which was generated by SSCC from Samba3, there are several instances of F:\Programs\samba\usermod.cmd

I'm calling from command line. The WPS objects don't currently function well. Command line is easier for me to post.

And it's worth saying -- thanks for looking at this.

10
General Discussion / Re: Reg article on CUA
« on: January 25, 2024, 03:28:27 pm »
Can you be clearer about "incredibly slow"? We are running 1990s programs on 2020s hardware. How slow could it be?

11
Networking / Re: Samba Users and Groups
« on: January 24, 2024, 09:06:53 pm »
While I have found how to get users and groups to work for Samba3, I noted that smbpasswd.exe was broken.

In Samba4, I'm getting some messages, but at least it does not crash.

Code: [Select]
{0}[f:\programs\samba] smbpasswd -a Warp40
Unknown parameter encountered: "display charset"
Ignoring unknown parameter "display charset"
lpcfg_do_global_parameter: WARNING: The "null passwords" option is deprecated
New SMB password:
Retype new SMB password:
sh.exe: 1: F:Programssambausermod.cmd: not found
Failed to add entry for user Warp40.

Perhaps something in smb.conf is interpreted differently than in Samba3?

12
Networking / Re: Samba Users and Groups
« on: January 23, 2024, 03:53:45 am »
These are the logs from smbd -d 8, but they were in \mptn\etc\samba\log\smbd*

13
Networking / Re: Samba Users and Groups
« on: January 22, 2024, 03:48:13 pm »
I'm starting the servers with the following command line:

smb.cmd start

I have not set libpathstrict. I'm attaching a testlog to this post in case that helps.

I started samba to check things on this post, and it did not generate any traps, but it also did not allow any client to connect. Browsing doesn't work, either. Samba creates logs in response to these actions, but the logs are zero length.

14
Hardware / Re: The last nail in OS/2's coffin
« on: January 22, 2024, 03:33:16 pm »
Intel proposed Itanium 64 bit in 1989. It takes some time for these plans to come about. Even articles about the new 64 bit architecture from Intel mention cores that still provide X86 mixed with 64-bit only cores.

https://en.wikipedia.org/wiki/Itanium

Even if nothing happens for a while, it's worth thinking about how OS/2 runs on CPU features that matter very little to the CPU market.

The other thing that threatens OS/2 is the aging of its users. I predict that will be the actual cause of death.

15
Networking / Re: Samba Users and Groups
« on: January 21, 2024, 10:50:26 pm »
libcx is up to date as far as netlabs-rel is concerned. 0.7.3-1 is the version number.

Pages: [1] 2 3 ... 68