Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - TeLLie

Pages: 1 [2] 3 4 ... 16
16
Applications / Re: OS/4 (technical details only)
« on: August 22, 2023, 01:36:44 pm »
Hi

Arcaos 5.1 will have UEFI.
My new laptop have only UEFI
Will os4 works with UEFI

  Regards, Tellie

17
Web applications / Re: Dooble releases, Qt5 builds
« on: August 06, 2023, 09:20:51 pm »
Hi
I notice that the build from qt6 works here better then the Qt5 build.
I use my own doodle build from qt632...

And the url you showed works perfecto

Regards, Tellie

18
Applications / Re: New Laptop
« on: August 06, 2023, 10:49:23 am »
Hi all,

I like that everybody have suggestions about the mem problem, but i like to have answers or recommendations on my quesions about the laptop :)

19
Applications / Re: New Laptop
« on: August 06, 2023, 10:46:47 am »
I was wondering more if Tellie monitored his swap file. He must be swapping and hopefully has his swapfile on the ram disk.
When I built the qt5webengine, I found my system swapping even with 3.2 GB visible to the system so it is possible to swap even with lots of memory.

Hi DAve,
Yes i have a swapfile, and its on a ramdisk
Otherwise it would be much worse.

20
Applications / Re: New Laptop
« on: August 05, 2023, 05:54:13 pm »
Hi Os4user

I see often cc1plus.exe: out of memory allocating 65536 bytes after a total of 282394624 bytes

I see my 980 free maem in a few second to 0 free mem

21
Applications / New Laptop
« on: August 05, 2023, 04:16:06 pm »
Hi all,

I'm just curious what new laptop runs with Arcanoae.
1. What cpu is has
2. How much ram is seeing bij Arcanoae
3. Have to have UEFI (For ArcanoaE 5.1)
4. And have a Ethernetport, as there is no Wireless one

The rest is not that important as i will use it only for compiling.

As i have now a:
CPU: GenuineIntel 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz
CPU Speed: 2435 Mhz
CPU Count: 4
with:
  Memory below 1MB: 624.00 KiB
  Memory between 1MB and 4GB: 1063.50 MiB
  Memory below 4GB: 1066.56 MiB
  Memory above 4GB: 14.74 GiB
As you can see i have only 1MIB as free mem.
When compiling things i have to reboot several times as i get often OUT of MeM

I like to buy a Medion Erazer Crawler E30 MD62472 (30034264)
This have a I5-1250H and also 16gigs mem (Hope it sees more Mem then the older one, but cannot check till i buy it )

Regards, Elbert




22
Programming / Re: Qt6 Development
« on: July 16, 2023, 02:29:58 pm »
Hi Paul,

When i use you're cmake build i get:

-- Configuring done
CMake Error at D:/qt632-src/qt6-base-os2/cmake/QtProcessConfigureArgs.cmake:963
(message):
  CMake exited with code Segmentation fault.

Any idea?

A update,
After a reboot I tried again, now it seems to compile further, now on 25%


Next error i see when building tools...

[D:\qt632-src\qt6-tools-os2\build]cmake --build . 2>&1 |tee make.out
[  0%] Built target Tools_timestamp
[  0%] Built target Linguist_lib_pri
[  0%] Built target Linguist_timestamp
[  0%] Automatic MOC for target lconvert
[  0%] Built target lconvert_autogen
Consolidate compiler generated dependencies of target lconvert
[  2%] Built target lconvert
[  2%] Automatic MOC for target lprodump
[  2%] Built target lprodump_autogen
[  2%] Running rcc for resource proparser
make.exe[2]: *** [src/linguist/lprodump/CMakeFiles/lprodump.dir/build.make:76: src/linguist/lprodump/.rcc/qrc_proparser.cpp] Bus error
make.exe[1]: *** [CMakeFiles/Makefile2:1617: src/linguist/lprodump/CMakeFiles/lprodump.dir/all] Error 2
make.exe: *** [Makefile:146: all] Error 2
 

23
Programming / Re: Qt6 Development
« on: July 16, 2023, 10:29:39 am »
Hi Paul,

I have build the Qt6.3.2
But now i see that i have build dll like:
D:\QT632-src\qt6-base-os2\build\lib>Dir *.dll
Qt6Conc6.dll  Qt6DBus6.dll  Qt6Netw6.dll  Qt6Sql6.dll   Qt6Widg6.dll
Qt6Core6.dll  Qt6Gui6.dll   Qt6Prin6.dll  Qt6Test6.dll  Qt6Xml6.dll

But you're own build has this:
Qt6Conct.dll  Qt6Netwk.dll  Qt6QuiCo.dll  Qt6UiTos.dll
Qt6Core.dll   Qt6Posig.dll  Qt6QuiD2.dll  Qt6WebCl.dll

Any idea why and how i get same file names as you have?

D:\QT632-src\qt6-base-os2>git checkout
Your branch is up to date with 'origin/6.3.x'.


24
Utilities / Re: Innoextract Port?
« on: June 13, 2023, 11:49:29 pm »
Hi all,

I also tried to compile it, using boost 1.57.0
Here its starts...
F:\Request\innoextract-1.9\cmake-920-qt632>innoextract.exe -v
innoextract 1.9
Extracts installers created by Inno Setup 1.2.10 to 6.0.5

But have no idea how to use it...
And not sure it works either...

25
Setup & Installation / Re: AOO4.11.1/Firefox/Seamonkey trouble
« on: June 07, 2023, 08:38:55 pm »
Hi

I read on some forum, if you're signature is correct ..
Not sure it's helping


26
Programming / Re: Qt6 Application Testing
« on: June 05, 2023, 07:08:30 pm »
Thanks David
Works now, also get warning about outdated Tor version..

27
Programming / Re: Qt6 Application Testing
« on: June 04, 2023, 11:47:26 pm »
Hi David
How do you setup Tor for doodle
I ported Vidalla not sure if this where allready done by Paul.

It says im connected to tor network, but no idea how it works with doodle..

28
Applications / Re: Upplay QT5
« on: May 19, 2023, 10:20:56 pm »
HI Dave

I use mostly just os2:TARGET_SHORT = in the pro file
I just compile it.
declarative\qml-plug.dll
src\mprisqt5.dll


29
Programming / Re: Building a Dooble RPM
« on: April 19, 2023, 07:06:08 pm »
Hi Dave

I use for building RPM the BWW rpmbuild-bot
https://github.com/bitwiseworks/rpmbuild-bot

30
Utilities / Re: Extract *.img file
« on: April 16, 2023, 10:12:07 pm »
Hi

Did you try with 7z ?

7z x name.img

Pages: 1 [2] 3 4 ... 16