Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mike Kölling

Pages: [1] 2 3 ... 9
1
Applications / Re: VLC 3.0.19 don't install !
« on: November 08, 2023, 02:57:34 pm »
I believe no matter how you install VLC, it will not work until tha idn11.dll is installed. Once installed, VLC will work from any location when updated.

I can confirm Davids finding. I have the idn11.dll aready in my Unixroot partion. I can't remember when I placed it there.
If I remove the idn11.dll then VLC cannot start.

Greetings, Mike

2
Applications / Re: VLC 3.0.19 don't install !
« on: November 07, 2023, 03:44:36 pm »
I do it usually as David has suggested with #1).
I extracted the zip-file to a folder of my choice. In this case to "F:\Programs\VLC2\".
I have added "F:\Programs\VLC2\USR\LOCAL\LIB;" to my LIBPATH statement in the config.sys long time ago.
And it starts and plays videos as expected.

Greetings from Potsdam, germany
Mike

3
Web applications / Re: Dooble releases, Qt5 builds
« on: August 08, 2023, 09:56:13 am »
Hi Holger,

I can confirm the behaviour described by you. Web site loads, but no articels can be opened. Haven't checked this in my first try  ;).

Regards,
Mike

4
Web applications / Re: Dooble releases, Qt5 builds
« on: August 07, 2023, 10:04:19 am »
Hi, would someone try this site with dooble:
https://www.sueddeutsche.de/
Hallo Holger, die Webseite der Süddeutschen Zeitung öffnet ganz normal in Daves QT5 Dooble version.

For the English speakers: This web site from "Süddeutsche Zeitung" opens quite normal by using Daves QT5 build of Dooble.

Greetings from Potsdam / Germany,
Mike

5
Web applications / Re: Dooble releases, Qt5 builds
« on: July 27, 2023, 11:41:23 am »
Thanks - it's downloading now.
Mike

6
Web applications / Re: Dooble releases, Qt5 builds
« on: July 27, 2023, 08:25:42 am »
The FTP-site is asking for credentials (login and pw) when I try to download.
Any idea what to use?

Mike

7
Applications / Re: Test build of dooble with qt5
« on: July 11, 2023, 11:39:37 am »
Using wget, something like:
Code: [Select]
wget ftp://dry@ftp.os2voice.org/Dooble_10_07_23.zip --ftp-password=email@address.com
Will download it....

Thanks Paul, download has been working as promised.

Mike

8
Applications / Re: Test build of dooble with qt5
« on: July 11, 2023, 09:23:08 am »
Another test build of Dooble. I compiled this from the official Dooble Github mostly for David McKenna as his issue, https://github.com/textbrowser/dooble/issues/182, "Open links in current instance", has been resolved. No icon etc as it is a test build. Once an official release is made, I'll build an RPM.
Log into ftp.os2voice.org as user dry, password, your email address. There's also previous RPM's there in the RPM directory.
Edit: File is Dooble_10_07_23.zip

Hi Dave,

do you have a download link?

Greetings,
Mike

9
Applications / Re: Do you have any update of Thunderbird?
« on: May 24, 2023, 11:18:05 am »
Maybe this post from Arca Noae will help you: "Resolving issues with GMail and OAuth 2.0 requirements"

https://www.arcanoae.com/resolving-issues-with-gmail-and-oauth-2-0-requirements/

At least it is working for me.
Greetings,
Mike

10
Programming / Re: Building a Dooble RPM
« on: April 24, 2023, 09:38:43 am »
Interesting, it installed fine here using ANPM.

I tried an install on my second machine using ANPM today. This time it runs almost fine. It installed the executable, it created the folder with the objects.
However it stated also the following error message at the end:

ERROR: wps-object: Could not create an object with ID <BWW_dooble_README_OS2> and specification "WPShadow|README_OS2|<BWW_dooble_FOLDER>|SHADOWID=D:\usr\share\doc\dooble-2023.04.20\README-os2.txt".

ERROR: wps-object: Could not create an object with ID <BWW_dooble_CHANGES_OS2> and specification "WPShadow|CHANGES_OS2|<BWW_dooble_FOLDER>|SHADOWID=D:\usr\share\doc\dooble-2023.04.20\CHANGES-os2.txt".

Rpmdb checksum is invalid: dCDPT(pkg checksums): dooble.pentium4 0:2023.04.20-1.oc00 - u

Greetings,
Mike

11
Programming / Re: Building a Dooble RPM
« on: April 23, 2023, 04:52:34 pm »
Here's my try at an rpm (actually includes the dbg one too). https://c.gmx.com/@744346040190108571/Uatmhxp_S_-YR9AMwll-nQ

Installation went well from command line "yum install dooble-2023.04.20-1.oc00.pentium4.rpm".
Using the ANPM installation from file failed with no indication what was wrong.
I'm typing now from the new rpm installation.

Greetings from Potsdam / Germany
Mike

12
Programming / Re: Building a Dooble RPM
« on: April 22, 2023, 10:08:04 am »
Is anyone interested in the rpm's? Not sure yet how they would co-exist with any future Bitwise releases, perhaps just releasing the zip would be fine.

At the moment the zip files are fine for me. However I would like to give the RPMs a try (out of curiosity).
By the way, your latest dooble build (QT5 version) is starting fast and the start page (in my case DuckDuckGo) is loading without problems.

Greetings,
Mike

13
Programming / Re: Qt6 Application Testing
« on: March 28, 2023, 06:10:23 pm »
What about simple browser from /qt6/examples/webenginewidgets/simple browser ?

Any traps or just a silent exit?

PS thanks for trying!

Simplebrowser starts but could not load a page. I see the following failure message:

Killed by SIGSEGV
pid=0x02b6 ppid=0x02af tid=0x0001 slot=0x011b pri=0x0200 mc=0x0001 ps=0x0010
F:\QT6TEST\QT6\BIN\QTWEBENGINEPROCESS.EXE
LIBCN0 ffffffff:ffffffff
cs:eip=55004000:55001020      ss:esp=1f48dca4:00000018      ebp=00120053
 ds=0000      es=0000      fs=ffffffff      gs=0000     efl=00000053
eax=0012f428 ebx=1ffc9d7c ecx=0012f43c edx=0012f460 edi=0012fd44 esi=0012fd6c

Greetings,
Mike

14
Programming / Re: Qt6 Application Testing
« on: March 28, 2023, 12:24:25 pm »
In a definite YMMV - https://smedley.id.au/tmp/qt6-6.4.3-os2-20230325.zip
...
but Steven couldn't reproduce and was able to render some pages.

Curious to see if it works for anyone else.

Dooble (7.189.189 Bytes from 2023-02-19) starts shortly and then stops during "Populating containers" with the following message (2 lines):
[105:1:0328/122225.747000:ERROR:system_network_context_manager.cpp(274)] Cannot use V8 Proxy resolver in single process mode.
[105:1:0328/122225.768000:ERROR:system_network_context_manager.cpp(274)] Cannot use V8 Proxy resolver in single process mode.

Greetings from Potsdam,
Mike

15
Multimedia / Re: Updated Uniaud32 build
« on: March 12, 2023, 12:46:04 pm »
I updated the source to linux 6.1.18 this morning - https://smedley.id.au/tmp/uniaud32-linux-6.1.18-20230312.zip

Hi Paul,

it's working fine on my TP 430s. Thanks.

Greetings from Potsdam / Germany,
Mike

Edit:
Command line mixer for UNIAUD32. Version 1.1
Detected UNIAUD version 3.01.01
Detected 1 audio adapter(s)
Card info for adapter 0:
  num: 0
  id: PCH
  driver: HDA-Intel
  name: HDA Intel PCH
  longname: HDA Intel PCH at 0xf2530000 irq 22
  mixer: Realtek ALC269VC
  componenets: HDA:10ec0269,17aa21fb,00100203 HDA:80862806,80860101,00100000

Pages: [1] 2 3 ... 9